Beruflich Dokumente
Kultur Dokumente
TM
Pin # 1 2 3 4 5 6 7 8
To PC
To System Board
To PC
To System Board
10
Figure 3. ispDOWNLOAD Cable In-System Programming Interface for the Sun Workstation
Front View of AMP Connector Pinout AMP Connector .100" Center-Spacing Eight Positions
Function Vcc SDO/TDO SDI/TDI ispEN .01 f Capacitor No Connect MODE/TMS GND SCLK/TCK
Note: Capacitor Recommended on System Board
Pin # 1 2 3 4 5 6 7 8
To Sun Workstation
To System Board
Copyright 2000 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A. Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
June 2000
dlcable_11
ispDOWNLOAD Cable
Figure 4. Configuring In-System Programming from a Remote System
4 or 5
ISP Device
SDOUT Vcc 10K SDIN Vcc 10K 100 ohm 100 pF 100 ohm
TDO / SDOUT
DO0 (pin 2)
TDI / SDIN
DO1 (pin 3)
TCK / SCLK 100 pF 100 ohm TMS / MODE Vcc 10K 100 pF 100 ohm ispEN Vcc 10K 100 pF 100 ohm RESET 100 pF
creation of a JEDEC file by the ispDesignEXPERT Systems or ispGDX Development System, Lattices ispVM System software programs devices on the endproduct board. Programming signals are generated from the parallel port of a PC and directed through the ispDOWNLOAD Cable to the device. With one of these cables and a connector on a board, no additional components are required for programming. The ispVM System software automatically generates the appropriate ISP command, programming address and data from the JEDEC fuse map information. ispVM System software is included with all Lattice design tool products.
DO2 (pin 4)
MODE
DO3 (pin 5)
ispEN
DO4 (pin 6)
RESET
VCC
VCC IN GND
DO5 (pin 7) DI5 (pin 12) Do6 (pin 8) DI4 (pin 13) DI3 (pin 15) (pin 20)
ispDOWNLOAD Cable
Automatic baud rate detection for 300 baud to 115,200 baud operations Operational at supply voltages of 3.3V or 5V Standard Lattice ISP programming interface and ispJTAG interface (IEEE 1149.1) support RJ-45 interface jack for easy ISP cable assembly replacement Compact size and low power requirements Easy interface to the Lattice ISP Engineering Kit Model 100 for single ispLSI device programming The ispDOWNLOAD cable assembly provides an interface between the ISP signals from the serial interface adapter and the target ISP system. The features of the ispDOWNLOAD cable assembly include: Six feet of eight-conductor flat cable with an RJ-45 connector on one end an an eight-position female header assembly on the other end RJ-45 connector for reliable and easy interfacing to the serial interface adapter Eight-position female header connector with .10 pin spacing for quick and low-cost interfacing to ISP target systems with a mating header pin strip. Keying is provided on the header connector for proper interfacing orientation Header connector assembly with super flexible wiring for durability
HW7265-DL2
pDS4102-WS ispDOWNLOAD Cable (for the Sun Workstation only). Contains 6 cable with RJ45 and AMP connectors, serial interface adapter for the RS232 Workstation port, documentation and ISP Daisy Chain Download Software for the Sun Workstation.