Beruflich Dokumente
Kultur Dokumente
alias COMMAND: alias command allows you to create a shortcut to a command. As the name indicates, you can set alias/shortcut name for the commands/paths which is too longer to remember. SYNTAX: The Syntax is alias [options] [ AliasName [ =String ] ] OPTIONS:
-a -p
EXAMPLE:
Removes all alias definitions from the current shell execution environment. Prints the list of aliases in the form alias name=value on standard output.
alias c='clear'
This command will set c to clear. Now if you type c it will clear the screen.
awk COMMAND: awk command is used to manipulate the text.This command checks each line of a file, looking for patterns that match those given on the command line. SYNTAX: The Syntax is awk '{pattern + action}' {filenames} OPTIONS:
-W version
-F
EXAMPLE: Lets create a file file1.txt and let it have the following data:
Data in file1.txt 14 15 16 15 15 11 5 5 56 25 6 1
awk '{print $1,$2,$1*$2}' file1.txt > file2.txt Command Explanation: st $1 : Prints 1 column nd $2 : Prints 2 column $1*$2 : Prints Result of $1 x $2 file1.txt : input file > : redirection symbol file2.txt : output file
The above command will redirect the output to file2.txt and it will look like, 14 15 210 15 15 225 5 56 280 5 25 125 autoreconf COMMAND: autoreconf - Update generated configuration files Run 'autoreconf' repeatedly to remake the GNU Build System files in the DIRECTORIES or the directory trees driven by CONFIG-URE-AC. By default, it only remakes those files that are older than their predecessors. If you install new versions of the GNU Build System, running 'autoreconf' remakes all of the files by giving it the '--force' option. SYNTAX: The Syntax is
Operation modes:
-h,--help -V, --version -v,--verbose -d,--debug -f, --force -i, --install -s,--symlink -m, --make -W,--warnings=CATEGORY print this help, then exit. print version number, then exit. verbosely report processing. don't remove temporary files. consider all files obsolete. copy missing auxiliary files. with -i, install symbolic links instead of copies when applicable, re-run ./configure && make report the warnings falling in CATEGORY [syntax]
EXAMPLE:
sets debugging flags. tells a2p that this awk script is always invoked with this -F switch. specifies the names of the input fields if input does not have to be split into an array. causes a2p to assume that input will always have that many fields.
EXAMPLE:
Command B
bc COMMAND: bc command is used for command line calculator. It is similar to basic calculator. By using which we can do basic mathematical calculations. SYNTAX: The Syntax is bc [options] OPTIONS:
-c -l filename
Compile only. The output is dc commands that are sent to the standard output. Define the math functions and initialize scale to 20, instead of the default zero. Name of the file that contains the basic calculator commands to be calculated this is not a necessary command.
EXAMPLE:
1. bc
Output:
bc 1.06 Copyright 1991-1994,1997,1998,2000 Free Software Foundation,Inc. This is free software with ABSOLUTELY NO WARRANTY. For details type `warranty'. 9*2 18
The above command used is for mathematical calculations.
2. bc -l
Output:
bc 1.06 Copyright 1991-1994,1997,1998,2000 Free Software Foundation,Inc. This is free software with ABSOLUTELY NO WARRANTY. For details type `warranty'. 1+2 3
3. bc calc.txt
Output:
bc 1.06 Copyright 1991-1994,1997,1998,2000 Free Software Foundation,Inc. This is free software with ABSOLUTELY NO WARRANTY. For details type `warranty'. 3
'calc.txt' file have the following code:1+2. Get the input from file and displays the output. bg COMMAND: bg command is used to place a job in background. User can run a job in the background by adding a "&" symbol at the end of the command. SYNTAX: The Syntax is bg [options] [job] OPTIONS:
-l -p -x job
Report the process group ID and working directory of the jobs. Report only the process group ID of the jobs. Replace any job_id found in command or arguments with the corresponding process group ID, then execute command passing it arguments. Specifies the job that want to run in the background.
EXAMPLE:
jobs
The above command will display the jobs in the shell.
[1] [2][3]+ bg 2
The above command will start running the xmms application. In such way you can start running the specific background process.
bzip2 COMMAND: bzip2 linux command is used to compress the file. Each file is replaced by a compressed version of itself with .bz2 extension. SYNTAX: The Syntax is bzip2 [ options ] filenames OPTIONS:
-c -d -z -t -f -k -q -s -v -V -L -1 -9
Compress or decompress to standard output. Force decompression. The complement to -d. Force compression. Performs the integrity test. It performs a trial decompression test and prints the result. Force overwrite of output file. Keep the original file. dont delete the input file during compression or decompression. Quiet, suppress non-essential warning messages. Reduce memory usage, for compression,decompression and testing. verbose mode shows the compression ratio for each file processed. Displays the version of the software. Displays the license terms and conditions. Performs fast compression,creating a relatively large files. Get the best possible compression.
EXAMPLE:
$ ls -l -rw-rw-r--
$ bzip2 -c -1 hiox.txt > hiox.txt.bz2 $ ls -l -rw-rw-r-- 1 hiox hiox 9150000 Sep 26 18:37 hiox.txt -rw-rw-r-- 1 hiox hiox 17706 Sep 27 12:38 hiox.txt.bz2
From the above example it is clear that the filesize is reduced from 9150000 bytes to 17706. When the File is reduced with option -9 the filesize still gets reduced.
$ bzip2 -c -9 hiox.txt > hscripts.txt.bz2 $ ls -l -rw-rw-r--rw-rw-r--rw-rw-r-1 hiox hiox 9150000 Sep 26 18:37 hiox.txt 1 hiox hiox 17706 Sep 27 12:38 hiox.txt.bz2 1 hiox hiox 2394 Sep 27 13:01 hscripts.txt.bz2
When the file is compressed with -1 the size was 17706 bytes and now the filesize is 2394 bytes. The 9 makes best compression but the default is 6.
Command c
cal COMMAND: cal command is used to display the calendar. SYNTAX: The Syntax is cal [options] [month] [year] OPTIONS:
-1 -3 -s -m -j -y
Displays single month as output. Displays prev/current/next month output. Displays sunday as the first day of the week. Displays Monday as the first day of the week. Displays Julian dates (days one-based, numbered from January 1). Displays a calendar for the current year.
EXAMPLE:
1. cal
Output:
September Su Mo Tu We 1 2 3 7 8 9 10 14 15 16 17 21 22 23 24 28 29 30
2008 Th Fr 4 5 11 12 18 19 25 26
Sa 6 13 20 27
2. cal -3 5 2008
Output:
April 2008 Su Mo Tu We Th 1 2 3 6 7 8 9 10 13 14 15 16 17 20 21 22 23 24 27 28 29 30
Fr 4 11 18 25
Sa 5 12 19 26
May 2008 Su Mo Tu We Th 1 4 5 6 7 8 11 12 13 14 15 18 19 20 21 22 25 26 27 28 29
Fr 2 9 16 23 30
Sa 3 10 17 24 31
Su 1 8 15 22 29
June 2008 Mo Tu We 2 3 4 9 10 11 16 17 18 23 24 25 30
Th 5 12 19 26
Fr 6 13 20 27
Sa 7 14 21 28
Here the cal command displays the calendar of April, May and June month of year 2008. cat COMMAND: cat linux command concatenates files and print it on the standard output. SYNTAX: The Syntax is cat [OPTIONS] [FILE]... OPTIONS:
-A -b -e -E -n -s -T -v
Show all. Omits line numbers for blank space in the output. A $ character will be printed at the end of each line prior to a new line. Displays a $ (dollar sign) at the end of each line. Line numbers for all the output lines. If the output has multiple empty lines it replaces it with one empty line. Displays the tab characters in the output. Non-printing characters (with the exception of tabs, new-lines and form-feeds) are printed visibly.
EXAMPLE:
This command creates a new file file1.txt. After typing into the file press control+d (^d) simultaneously to end the file. 2. To Append data into the file:
cat file1.txt
This command displays the data in the file. 4. To concatenate several files and display:
-L -P
EXAMPLE:
1. cd linux-command This command will take you to the sub-directory(linux-command) from its parent directory.
2. cd .. This will change to the parent-directory from the current working directory/sub-directory. 3. cd ~ This command will move to the user's home directory which is "/home/username". chattr COMMAND: chattr command is used to change the file attributes. This is an admin command. Root user only can change the file attributes/Process. SYNTAX: The Syntax is chattr [options] filename OPTIONS:
+i -i +a -a +S
Make the file as Read-Only. Remove the Read-Only. Can't open file for writing. Open file for writing. The changes in the file are written synchronously on the disk.
EXAMPLE:
1. chattr +i test.txt
Here the 'test.txt' file has the write permission, to make it as Read-Only file use +i option.
2. chattr -i test.txt
The above command process is used to remove the Read-Only mark. chgrp COMMAND: chgrp command is used to change the group of the file or directory. This is an admin command. Root user only can change the group of the file or directory. SYNTAX: The Syntax is chgrp [options] newgroup filename/directoryname OPTIONS:
-R -c -f
Change the permission on files that are in the subdirectories of the directory that you are currently in. Change the permission for each file. Force. Do not report errors.
EXAMPLE:
Create a start or kill symbolic link in every runlevel for the specified service according to default behavior specified in the service's initialization script. Print whether the specified service is on or off in each level. If no service is specified, print runlevel information for all services managed by chkconfig. Specify by number the runlevels to change. Provide numbers as a numeric string: e.g., 016 for levels 0, 1 and 6. Use this to override specified defaults. Remove entries for specified service from all runlevels.
EXAMPLE:
1. chkconfig --list
The above configuration command list the runlevels and the service status(i.e, on or off).
Explanation
chmod COMMAND: chmod command allows you to alter / Change access rights to files and directories. File Permission is given for users,group and others as,
# 0 1 2 3 4 5 6 7 none
File Permission execute only write only write and execute read only read and execute read and write set all permissions
OPTIONS:
-c -f -R -v
Displays names of only those files whose permissions are being changed Suppress most error messages Change files and directories recursively Output version information and exit.
EXAMPLE:
ls -alt
This command is used to view your files with what permission they are. 2. To make a file readable and writable by the group and others.
-R -c -f
Change the permission on files that are in the subdirectories of the directory that you are currently in. Change the permission for each file. Prevents chown from displaying error messages when it is unable to change the ownership of a file.
EXAMPLE:
Explanation
chpasswd COMMAND: chpasswd command is used to change password for users. This is an admin command, Only root user can change the password for users.
-c -e -f flags
Clears all password flags. Specifies that the passwords are of encrypted format. Specifies the comma separated list of password flags to set. Valid flag values are: ADMIN, ADMCHG, and/or NOCHECK. Refer to the pwdadm command documentation for details about these values.
-R load_module Specifies the loadable I & A module used to change user's password.
EXAMPLE:
chpasswd
Followed by entering username:password pairs, one pair per line. Enter ctrl+D when finished.
-c -l -s
Output differing bytes as characters. Print the byte number (decimal) and the differing byte values (octal) for each difference. Prints nothing for differing files, return exit status only.
EXAMPLE:
-a -b -f -p
same as -dpR. like --backup but does not accept an argument. if an existing destination file cannot be opened, remove it and try again. same as --preserve=mode,ownership,timestamps.
-preserve the specified attributes (default: mode,ownership,timestamps) and preserve[=ATTR_LIST] security contexts, if possible additional attributes: links, all.
--nodon't preserve the specified attribute. preserve=ATTR_LIST --parents append source path to DIRECTORY.
EXAMPLE:
cp file1 file2
The above cp command copies the content of file1.php to file2.php.
cp -b file1.php file2.php
Backup of file1.php will be created with '~' symbol as file2.php~. 3. Copy folder and subfolders:
cp -R scripts scripts1
The above cp command copy the folder and subfolders from scripts to scripts1. cpio COMMAND: cpio command creates and un-creates archived cpio files. It is capable of copying files to things other than a hard disk. Probably, this command is also used to backup and restore files. SYNTAX: The Syntax is cpio [options] OPTIONS:
-i -o -p -c -d -u -m -v
Extracts files from the standard input. Reads the standard input to obtain a list of path names and copies those files onto the standard output. Reads the standard input to obtain a list of path names of files. Read or write header information in ASCII character form for portability. Creates directories as needed. Copy unconditionally (normally, an older file will not replace a newer file with the same name). Retain previous file modification time. This option is ineffective on directories that are being copied. Verbose.Print a list of file names.
EXAMPLE:
-c -b
EXAMPLE: Lets create a file file1.txt and let it have the following data:
Data in file1.txt This is, an example program,for cut command. 1. cut -c1-3 text.txt
Output:
Thi
Cut the first three letters from the above line.
Command D
Explanation
date COMMAND: date command prints the date and time. SYNTAX: The Syntax is date [options] [+format] [date] OPTIONS:
-a
Slowly adjust the time by sss.fff seconds (fff represents fractions of a second). This adjustment can be positive or negative.Only system admin/ super user can adjust the time.
Sets the time and date to the value specfied in the datestring. The datestr may s datecontain the month names, timezones, 'am', 'pm', etc. string -u
Format:
Display (or set) the date in Greenwich Mean Time (GMT-universal time).
%a %A %b %B %c %D %j %n %p %T %t %V
Abbreviated weekday(Tue). Full weekday(Tuesday). Abbreviated month name(Jan). Full month name(January). Country-specific date and time format.. Date in the format %m/%d/%y. Julian day of year (001-366). Insert a new line. String to indicate a.m. or p.m. Time in the format %H:%M:%S. Tab space. Week number in year (01-52); start week on Monday.
EXAMPLE:
1. date command
date
The above command will print Wed Jul 23 10:52:34 IST 2008 2. To use tab space:
date -V
The above command will print 30 4. To set the date,
Specifies the input device or partition (or) file from which data is to be dumped Specifies the output device or partition (or) file to which data is to be dumped Specifies how many bytes is to be readed from a input file at a time during the dumping process Specifies how many bytes is to be written to the output file at a time during the dumping process Specifies how many bytes is to be readed and written at a time during the dumping process
EXAMPLE:
1. To create bootable floppy : dd if=diskboot.img of=/dev/fd0 This command creates the bootable floppy.
In above command: diskboot.img -Is the bootable image /dev/fd0 -Is a floppy disk
2. To import the data from one hard-disk to another hard-disk: dd if=/dev/sda of=/dev/sdb
In above command: /dev/sda -Is the hard-disk from which data is dumped /dev/sdb -Is the hard-disk to which data is dumped
3. To import the data from one partition to another partition: dd if=/dev/sda1 of=/dev/sda2
/dev/sda1 -Is the partition from which data is dumped /dev/sda2 -Is the partition to which data in /dev/sda1 is dumped
4. To Specify number of bytes readed and written at a time during dumping: dd if=/dev/sda1 of=/dev/sda2 bs=2100 The above command will dump data from /dev/sda1 to /dev/sda2 by reading and writing 2100 bytes at a time. df COMMAND: df command is used to report how much free disk space is available for each mount you have. The first column show the name of the disk partition as it appears in the /dev directory. Subsequent columns show total space, blocks allocated and blocks available. SYNTAX: The Syntax is df [options] OPTIONS:
-a -h -H -i -l -P -T
Include dummy file systems. Print sizes in human readable format.(e.g., 1K 234M 2G) Print sizes in human readable format but use powers of 1000 not 1024. List inode information instead of block usage. Limit listing to local file systems. Use the POSIX output format. Print file system type.
EXAMPLE:
1. df
Output:
Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00 150263916 14440324 128067408 11% / /dev/sda1 101086 10896 84971 12% /boot tmpfs 253336 0 253336 0% /dev/shm In the above output: /dev/mapper/VolGroup00-LogVol00 -> Specifies FileSystem. /dev/sda1 -> Specifies FileSystem. tmpfs -> Specifies FileSystem.
2. df -h
Output:
Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 144G 14G 123G 11% / /dev/sda1 99M 11M 83M 12% /boot tmpfs 248M 0 248M 0% /dev/shm
3. df -H
Output:
Filesystem Size Used /dev/mapper/VolGroup00-LogVol00 154G 15G /dev/sda1 104M 12M tmpfs 260M 0
Avail Use% Mounted on 132G 88M 260M 11% / 12% /boot 0% /dev/shm
Print size in human readable format but use powers of 1000 not to 1024. diff COMMAND: diff command is used to find differences between two files. SYNTAX: The Syntax is diff [options..] from-file to-file
OPTIONS:
-a -b -c -e -H -i -n -q -r -s -w -y
Treat all files as text and compare them line-by-line. Ignore changes in amount of white space. Use the context output format. Make output that is a valid ed script. Use heuristics to speed handling of large files that have numerous scattered small changes. Ignore changes in case; consider upper- and lower-case letters equivalent. Prints in RCS-format, like -f except that each command specifies the number of lines affected. Output RCS-format diffs; like -f except that each command specifies the number of lines affected. When comparing directories, recursively compare any subdirectories found. Report when two files are the same. Ignore white space when comparing lines. Use the side by side output format.
EXAMPLE:
Lets create two files file1.txt and file2.txt and let it have the following data.
Data in file1.txt HIOX TEST hscripts.com with friend ship hiox india
This command will compare the files ignoring white/blank space, It is easier to differentiate the files.
ship
The third line(with friend ship) in file2.txt has more blank spaces, but still the -b ignores the blank space and does not show changes in the particular line, -y printout the result side by side.
ship
du COMMAND: du command is used to report how much disk space a file or directory occupies. SYNTAX: The Syntax is du [options] directories OPTIONS:
-a -k -s -L -x
Displays the usage of space that each file is taking up. Write the files size in units of 1024 bytes, rather than the default 512-byte units. Instead of the default output, report only the total sum for each of the specified files. Process symbolic links by using the file or directory which the symbolic link references, rather than the link itself. When evaluating file sizes, evaluate only those files that have the same device as the file specified by the file operand.
EXAMPLE:
1. du -a images
Output:
12 20
images/daisy.jpg images/flo.gif
images/CHILD.gif images/indigo.gif images/flower.gif images/sunflower.jpg images/tulip-flower-clipart5.gif images/flower.jpg images/thumbnail.aspx images/baby.jpg images/woodpecker.gif images/baby.gif images/thumbnail.jpg images/house.bmp images/peacock.gif images
2. du -s images
Output:
1544
images
3. du -h
Output:
84K
Displays the current folder capacity.
4. du -h file1.php
Output:
8.0K file1.php
Displays the storage capacity of file1.php. dump COMMAND: dump command makes backup of filesystem or file and directories. SYNTAX: The Syntax is dump [options] [dump-file] [File-system or file or directories]. OPTIONS:
-[level] The dump level any integer -f -u Make the backup in a specified file Updates /etc/dumpdats file for the backup made
-v -e
EXAMPLE:
In above command: -0 -Is the dump-level [0 specifies full-backup] databackup -Is a dump-file [or backup-file] /home/user1/data -Is a directory for which a backup is created
2. To make a backup for a directory or file which is already backedup with dump level 0:
-1 -Is the dump-level [1 specifies incremental backup] databackup -Is a dump-file [or backup-file] /home/user1/data -Is a directory for which a backup is created
echo COMMAND: echo command prints the given input string to standard output. SYNTAX: The Syntax is echo [options..] [string] OPTIONS:
-n -e -E
do not output the trailing newline enable interpretation of the backslash-escaped characters listed below disable interpretation of those sequences in STRINGs
\NNN \a \\ \b
the character whose ASCII code is NNN (octal) alert (BEL) backslash backspace
\c \f \n \r \t \v
suppress trailing newline form feed new line carriage return horizontal tab vertical tab
EXAMPLE:
1. echo command
echo -e "hscripts\tHiox\tIndia"
The above command will print as hscripts Hiox India
Command E
egrep COMMAND: egrep command is used to search and find one or more files for lines that match the given string or word. SYNTAX: The Syntax is egrep [options] pattern [file] OPTIONS:
-b -c -h -i -n -q -r
Print the byte offset of input file before each line of output. Print's the count of line matched. Print matched lines but not filenames. Ignore changes in case; consider upper- and lower-case letters equivalent. Print line and line number. Prints in quite mode, prints nothing. Recursively read all files in directories and in subdirectories found.
-v -V -w . * ^ $
Prints all the lines that do not match. Print Version. Match on whole word only. Matches single character. Wild Character. Starting with. Ending with.
EXAMPLE: Lets assume that we have a file file1.txt and it has the following data.
hscripts has many valuable free scripts It is the parent site of www.forums.hscripts.com hscripts include free tutorials and free gif images free DNS lookup tool Purchase scripts from us A webmaster/web master resource website
1. To search more words from a file :
Command F
fdisk COMMAND: fdisk command is used for partition table manipulator. Hard disks can be divided into one or more logical disks called partitions. SYNTAX: The Syntax is fdisk [options] OPTIONS:
-l -u -s -b -C -H -S
List the partition tables for the specified devies and then exit. When listing partition tables, give sizes in sectors instead of cylinders. The size of the partition is printed on the standard output. Specify the sector size of the disk. Specify the number of cylinders of the disk. Specify the number of heads of the disk. Specify the number of sectors per track of the disk.
EXAMPLE:
1. fdisk /dev/hdb
It prints the partition table and configuration information.
Explanation
fg COMMAND: fg command is used to place a job in foreground. SYNTAX: The Syntax is fg [specify job] OPTIONS: There is no options for fg command. EXAMPLE:
1. To move a process in foreground: Lets start some three jobs and suspend those running process in background.
jobs
The above command will display the jobs in the shell.
[1] [2][3]+ fg 1
The above command will run the kmail application process in foreground. fgrep COMMAND: fgrep command is used to search one or more files for lines that match the given string or word. fgrep is faster than grep search, but less flexible: it can only find fixed text, not regular expressions. SYNTAX: The Syntax is fgrep [options] pattern [file] OPTIONS:
-a -b -c -h -i -n -q -r -v -V -w
Don't suppress output lines with binary data, treat as text. Print the byte offset of input file before each line of output. Print's the count of line matched. Print matched lines but not filenames. Ignore changes in case; consider upper- and lower-case letters equivalent. Print line and line number. Prints in quite mode, prints nothing. Recursively read all files in directories and in subdirectories found. Prints all the lines that do not match. Print Version. Match on whole word only.
EXAMPLE: Lets assume that we have a file file1.txt and it has the following data.
hscripts is the parent site of www.forums.hscripts.com ask your technical doubts in our forum our forums is free
1. To search and print the lines containing forum :
Explanation
file COMMAND: file command tells you if the object you are looking at is a file or a directory. SYNTAX: The Syntax is file [options] directoryname/filename
OPTIONS:
-c -h -m -f
Check the magic file for format errors. For reasons of efficiency, this validation is normally not carried out. Do not follow symbolic links. Use mfile as an alternate magic file. ffile contains a list of the files to be examined.
EXAMPLE:
1. file *.txt
Output:
2. file nimi
Output:
nimi: directory
Print the given object nimi is an directory or file. Explanation find COMMAND: find command finds one or more files assuming that you know their approximate filenames. SYNTAX: The Syntax is find path [options] OPTIONS:
It search for the given file, in the current directory or any other subdirectory. True if the file was accessed n days ago. The access time of directories in path is changed by find itself. True if the file's status was changed n days ago. True if the file belongs to the group gname. If gname is numeric and does not appear in the /etc/group file, it is taken as a group ID. True if the file's data was modified n days ago. True if the file is n blocks long (512 bytes per block). If n is followed by a c, the size is in bytes.
EXAMPLE: 1. find -name 'cal.txt' The system would search for any file named 'cal.txt' in the current directory and any subdirectory. 2. find / -name 'cal.txt' The system would search for any file named 'cal.txt' on the root and all subdirectories from the root. 3. find -name '*' -size +1000k The system would search for any file in the list that is larger than 1000k. Explanation finger COMMAND: finger command displays the user's login name, real name, terminal name and write status (as a ''*'' after the terminal name if write permission is denied), idle time, login time, office location and office phone number.. SYNTAX: The Syntax is finger [-lmsp] [user ...] [user@host ...] OPTIONS:
-l -m -p -s
Prints all the information described by -s option and also the user's home directory, home phone number, login shell, mail status, and the contents of the files ".plan",".project",".pgpkey", and ".forward" from the users home directory. Match arguments only on user name (not first or last name). Supress the prinitng format of -l, It will not display the contents of ".plan",".project", and ".pgkey" files. Prints the output in short format.
EXAMPLE:
1. To Print the user information in short format: 2. finger -s hiox 3. Login Name Tty Idle LoginTime Office OfficePhone 4. HIOX HIOX INDIA *:0 Sep 14 09:07 5. HIOX HIOX INDIA *pts/0 9 Sep 14 09:08 6. HIOX HIOX INDIA *pts/1 1:29 Sep 14 09:12 finger command prints the user information as user's login name, real name, terminal name and write status, idle time, login time, office location and office phone number. Explanation free COMMAND: free command displays information about free and used memory on the system. SYNTAX: The Syntax is free [options] [-V]
OPTIONS:
-b -k -m
Prints the memory information in bytes. Prints the memory information in kilo-bytes. Prints the memory information in mega-bytes.
-s Prints the output continously. Type the delay time to print the output continously. delay -t prints a line containing totals.
EXAMPLE:
1. To Print the memory size information: 2. free 3. total used free shared buffers cached 4. Mem: 223740 219492 4248 0 3756 73212 5. -/+ buffers/cache: 142524 81216 6. Swap: 1052216 66732 985484 The free command displays all the memory information of the system like total memory used and free memory. 7. To Print memory information from file: 8. cat /proc/meminfo 9. MemTotal: 223740 kB 10. MemFree: 8512 kB 11. Buffers: 4432 kB 12. Cached: 67860 kB 13. SwapCached: 15032 kB 14. Active: 172484 kB 15. Inactive: 20168 kB 16. HighTotal: 0 kB 17. HighFree: 0 kB 18. LowTotal: 223740 kB 19. LowFree: 8512 kB 20. SwapTotal: 1052216 kB 21. SwapFree: 985488 kB 22. Dirty: 52 kB 23. Writeback: 0 kB 24. Mapped: 166064 kB 25. Slab: 14860 kB 26. Committed_AS: 541000 kB 27. PageTables: 3260 kB 28. VmallocTotal: 794616 kB 29. VmallocUsed: 3056 kB 30. VmallocChunk: 791084 kB 31. HugePages_Total: 0 32. HugePages_Free: 0 33. Hugepagesize: 4096 kB The above command prints the memory information of the system. Explanation
Command G
grep COMMAND: grep command selects and prints the lines from a file which matches a given string or pattern. SYNTAX: The Syntax is grep [options] pattern [file] OPTIONS:
-A -a -b -c -d action -e pattern -h -i -n -q -r -v -V -w . * ^ $
Print num lines of text that occur after the matching line. Don't suppress output lines with binary data, treat as text. Print the byte offset of input file before each line of output. Print's the count of line matched. Define action for accessing the directories read read all files in the directories. skip skip directories. recurse recursively read all files and directories Search for pattern. Print matched lines but not filenames. Ignore changes in case; consider upper- and lower-case letters equivalent. Print line and line number. Prints in quite mode, prints nothing. Recursively read all files in directories and in subdirectories found. Prints all the lines that do not match. Print Version. Match on whole word only. Matches single character. Wild Character. Starting with. Ending with.
EXAMPLE: Lets assume that we have a file file1.txt and it has the following data.
hscripts has many valuable free scripts It is the parent site of www.forums.hscripts.com hscripts include free tutorials and free gif images Purchase scripts from us A webmaster/web master resource website
1. To print all lines containing hscripts :
grep 'hscripts' file1.txt The output will be. hscripts has many valuable free scripts It is the parent site of www.forums.hscripts.com hscripts include free tutorials and free gif images
2. To print the count of line that matches hscripts. grep -c 'hscripts' file1.txt The output will be. 3
3. To print the lines that starts as hscripts. grep '^hscripts' file1.txt The output will be. hscripts has many valuable free scripts hscripts include free tutorials and free gif images
4. To Search the files in HEC directory which has the string "include": grep -c 'include' HEC/* The above command will print the file name and count of line that matched the string "include" Sample output: HEC/admin.php:3 HEC/auth.php:1 HEC/calendar.php:3 HEC/checklogin.php:0 HEC/colors.php:0 HEC/msize.php:3 Explanation groupadd COMMAND: groupadd command is used to create a new group account.This is an admin command. SYNTAX: The Syntax is groupadd [options] groupname OPTIONS:
-g -r
The numerical value of the group's ID. This value must be unique.Values between 0 and 99 are typically reserved for system accounts. This flag instructs groupadd to add a system account.This option is suitable for Redhat linux only.
groupdel COMMAND: groupdel command is used to delete(remove) a group. This is an admin command. SYNTAX: The Syntax is groupdel groupname OPTIONS: There is no options for groupdel command. Directly give the groupname. EXAMPLE: 1. groupdel hiox Delete(Remove) the group hiox. Explanation groupmod COMMAND: groupmod command is used to modify group. This is an admin command. SYNTAX: The Syntax is groupmod [options] newname oldname OPTIONS:
-g -n
The numerical value of the group's ID. This value must be unique.Values between 0 and 99 are typically reserved for system accounts.The value must be non-negative. The name of the group will be changed from group to group.
EXAMPLE: 1. groupmod -n vizhi vizhi1 In the above example the groupmod command would change the group 'vizhi' to 'vizhi1'. Explanation groups COMMAND: groups command is used to print the groups a user is in. SYNTAX: The Syntax is groups OPTIONS:
--help Print help message and exit -Print version and exit version
EXAMPLE:
1. Prints the groups of user. $ groups Output: hiox apache 2. Prints the groups of super user. # groups Output: root bin daemon sys adm disk wheel.
Command H
Explanation
halt COMMAND: halt command is used to shutdown the computer. SYNTAX: The Syntax is halt [-d | -f | -h | -n | -i | -p | -w] reboot [-d | -f | -i | -n | -w] poweroff [-d | -f | -h | -n | -i | -w] OPTIONS:
-d -h -n -i -p -w
Don't write wtmp record(into /var/log/wtmp file). The -n flag implies -d put all harddrives in the system in standby mode before the system is halted or turnedoff Don't sync before reboot or halt shutdown all network interface. While halting the system, also turnoff the system. This is default when halt is called as poweroff. Don't actually reboot or halt but only write wtmp record (into /var/log/wtmp file)
EXAMPLE:
halt
This command is similar to poweroff, which shutdown the system. 2. To Poweroff the system:
poweroff
Poweroff command used for turnoff the system. 3. To reboot the system:
reboot
Reboot command used for reboots/restarts the system. Explanation head COMMAND: head command is used to display the first ten lines of a file, and also specifies how many lines to display. SYNTAX: The Syntax is head [options] filename OPTIONS:
-n -n number -c number
To specify how many lines you want to display. The number option-argument must be a decimal integer whose sign affects the location in the file, measured in lines. The number option-argument must be a decimal integer whose sign affects the location in the file, measured in bytes.
EXAMPLE: 1. head index.php This command prints the first 10 lines of 'index.php'. 2. head -5 index.php The head command displays the first 5 lines of 'index.php'. 3. head -c 5 index.php The above command displays the first 5 characters of 'index.php'. Explanation host COMMAND: host command is used to find the ip address of the given domain name and also prints the domain name for the given ip. SYNTAX: The Syntax is host [-aCdlnrTwv] domain-name/ipaddress OPTIONS:
-a -C -d -l -t
Prints all the DNS records for the given hostname. Prints the SOA records and authorative name servers. It is equivalent to -v. Lists all hosts in a domain using AXFR. used to select the query type. Query Type: CNAME,NS,SOA,KEY etc,.
-W -v -T
Specifies how long to wait for a reply. Verbose output is generated by host. Use TCP instead of UDP to query nameserver. This is implied in queries that require TCP, such as AXFR requests.
EXAMPLE:
1. To find the ipaddress of a hostname host 123456789.co.in 123456789.co.in has address 69.65.102.222 By typing the hostname along with the host command you can get its ipaddress. The ip address of 123456789.co.in is 69.65.102.222 2. To Print SOA record information: host -C 123456789.co.in Nameserver ns1.dnshorizon.com: 123456789.co.in SOA ns1.dnshorizon.com. saisan.gmail.com. 2007062001 86400 7200 3600000 86400 Nameserver ns2.dnshorizon.com: 123456789.co.in SOA ns1.dnshorizon.com. saisan.gmail.com. 2007062001 86400 7200 3600000 86400 The above cmd prints the host's nameserver and its SOA record.
Explanation
hostid COMMAND: hostid command prints the numeric identifier or id of the current host in hexadecimal. SYNTAX: The Syntax is hostid OPTIONS:
--help Print help message and exit -Print version and exit version
EXAMPLE:
2. hostid 3. a3b50706
This command prints the hostid in hexadecimal. Explanation hostname COMMAND: hostname specifies the name of the host. SYNTAX: The Syntax is hostname [-a | -d | -f | -h | -i | -s] OPTIONS:
-a -d -f -h -i -s
Displays the alias name of the host, if used. Displays DNS domain name Displays fully qualified domain name. Displays help message. Displays IP address of the host. Trim domain name from display.
EXAMPLE:
1. hostname command hostname The above command will print as username.com 2. hostname -a The above command will remove space and print as username 3. To display DNS domain name hostname -d The above command will print as .com Explanation id COMMAND: id command prints the effective(current) and real userid(UID)s and groupid(GID)s. SYNTAX: The Syntax is id [options] OPTIONS:
-a
Reports user name, use ID and all the groups to which the user belongs.
-G -g -u
Output all real and effective group IDs,using the format "%u\n". Output only the effective group IDs,using the format "%u\n". Output only the effective user Id,using the format "%u\n".
EXAMPLE: 1. id -a Output: uid=501(username) gid=501(username) groups=48(apache), 501(username) Prints real and current group IDs. 2. id -G Output: 501 48 Prints in the format of "%u\n" 3. # id Output: uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys), 4(adm),6(disk),10(wheel) context=user_u:system_r:unconfined_t The above example display the rootuser uid, gid, groups and context. Explanation info COMMAND: info command is used to display the readable online documentation for the specified command . SYNTAX: The Syntax is info commandname OPTIONS:
-n -f
Specify nodes in first visited info file. Specify info file to visit.
EXAMPLE: 1. info man Display the readable online documentation for the man command. Explanation ifconfig COMMAND: ifconfig command displays information about the network interfaces attached to the system and also used to configure the network interface. SYNTAX: The Syntax is ifconfig [options] OPTIONS:
-a
Interface [interface-name] [interface-name] up [interface-name] down [interface-name] [IP Address] up dispalys information about interface Activates the interface Inactivates the interface Assigns IP address to the interface and activates it
EXAMPLE:
1. To get information of active network-interfaces: ifconfig The sample output of above command:
eth0 Link encap:Ethernet HWaddr 00:14:85:9C:CC:55 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::214:85ff:fe9c:cc55/64 Scope:Link UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7856 errors:0 dropped:0 overruns:0 frame:0 TX packets:7856 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:492016 (480.4 KiB) TX bytes:398 (398.0 b) Interrupt:201 Memory:e1000000-0 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0 inet6 addr: ::1/128 Scope:Host UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1455 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:1917382 (1.8 MiB) TX bytes:1917382 (1.8 MiB) In above output: Link encap:Ethernet -Specifies the type Interface HWaddr 00:14:85:9C:CC:55 -Specifies the Hardware or MAC address inet addr:192.168.0.12 -Specifies the IP address assigend to network-interface
2. To Assign IP address to Network Interface[Ethernet Card]: ifconfig eth0 192.168.0.12 up The above command will Assign IP address 192.168.0.12 to Ethernet card with name eth0. 3. To inactivate the Network Interface[Ethernet Card]: ifconfig eth0 down The above command inactivates the ethernet card. Explanation jobs COMMAND: jobs command is used to list the jobs that you are running in the background and in the foreground. If the prompt is returned with no information no jobs are present.
-l -n -p
Report the process group ID and working directory of the jobs. Display only jobs that have stopped or exited since last notified. Displays only the process IDs for the process group leaders of the selected jobs.
EXAMPLE: 1. jobs -l Lists the jobs that you are running in the foreground (or) background. 2. jobs -p Display only the process Id for the listed jobs. kill COMMAND: kill command is used to kill the background process. SYNTAX: The Syntax is kill [-s] [-l] %pid OPTIONS:
-s -l -pid -9
Specify the signal to send. The signal may be given as a signal name or number. Write all values of signal supported by the implementation, if no operand is given. Process id or job id. Force to kill a process.
It will list the background jobs with its job id as, xmms 3956 kmail 3467
To kill a job or process. kill 3956
-n -R -x -a
Specify how many lines to show. Suppresses the display of the hostname field. Display the system shutdown entries and run level changes. Display the hostname in the last column. Useful in combination with the next flag.
EXAMPLE:
1. last
Displays the last logged in users list.
2. last -x
Displays the logged in users list with shutdown entries and run level changes. Explanation lastlog COMMAND: lastlog command is used to print the last login times for system accounts. Login information is read from the file /var/log/lastlog. SYNTAX: The Syntax is lastlog [options] OPTIONS:
-t n
EXAMPLE: 1. lastlog -t 5 Displays the login information, 5 days ago. 2. last -u username Displays the login information for the specified user. Explanation less COMMAND:
less command is used to display text in the terminal screen. It just prints the text in the given file, you cannot edit or manipulate the text here. To display the file from the specified line, enter the line number followed by colon(:). It allows Forward and backward movement in the file. SYNTAX: The Syntax is less [options] filename OPTIONS:
-c +n :p :d
Clear screen before displaying. Starts up the file from the given number. Examine the pervious file in the command line list. Remove the current file from the list of files.
EXAMPLE: 1. less +3 index.php Start printing from 3rd line of the file. Explanation link COMMAND: link command is used to create a link to a file. It is also called as hard link. Inode will be same for source and destination. SYNTAX: The Syntax is link existingfilename newfilename (or) link source destination OPTIONS:
--help Print help message and exit -Print version and exit version
EXAMPLE: 1. link test.php test1.php Create a link to 'test1.php' file. Here inode for 'test.php' and 'test1.php' will be same. ln COMMAND: ln command is used to create link to a file (or) directory. It helps to provide soft link for desired files. Inode will be different for source and destination. SYNTAX: The Syntax is ln [options] existingfile(or directory)name newfile(or directory)name OPTIONS:
-f
Link files without questioning the user, even if the mode of target forbids writing. This is the default if the standard input is not a terminal.
-n -s
EXAMPLE:
1. ln -s file1.txt file2.txt
Creates a symbolic link to 'file1.txt' with the name of 'file2.txt'. Here inode for 'file1.txt' and 'file2.txt' will be different.
2. ln -s nimi nimi1
Creates a symbolic link to 'nimi' with the name of 'nimi1'.
Explanation
ls COMMAND: ls command lists the files and directories under current working directory. SYNTAX: The Syntax is ls [OPTIONS]... [FILE] OPTIONS:
-l -t -a -d -p -u -i -ltr -lSr
Lists all the files, directories and their mode, Number of links, owner of the file, file size, Modified date and time and filename. Lists in order of last modification time. Lists all entries including hidden files. Lists directory files instead of contents. Puts slash at the end of each directories. List in order of last access time. Display inode information. List files order by date. List files order by file size.
EXAMPLE:
ls /
lists the contents of root directory. 2. Display hidden files and directories:
ls -a
lists all entries including hidden files and directories. 3. Display inode information:
The above command displays filename with inode value. Explanation lsattr COMMAND: lsattr command is used to list the attributes of the specified file or directory. SYNTAX: The Syntax is lsattr [options] OPTIONS:
-R -a -d
Recursively list attributes of directories and their contents. List all files in directories, including files that start with `.'. List directories like other files, rather than listing their contents.
EXAMPLE:
1. List attributes: lsattr Lists the attributes of the current directory. 2. Set the attribute: chattr +i test.txt Set the attribute for 'test.txt' file. 3. lsattr test.txt Lists the attributes of the 'test.txt' file. ----i-------- ./test.txt Explanation mail COMMAND: mail command is used to send and receive mails locally and globally. SYNTAX: The Syntax is
mail OPTIONS:
-s -c -b -f -i
Specify subject on command line. Send carbon copies to list of users. Send blind carbon copies to list. List should be a comma-separated list of names. Read in the contents of your mbox for processing; when you quit, mail writes undeleted messages back to this file. Ignore tty interrupt signals. This is particularly useful when using mail on noisy phone lines.
EXAMPLE:
1. Receive mails mail The above command display the messages. Press Enter to view the next message after '&' symbol. 2. Sent mails mail abc@localhost.com (or) mail abc@hiox.com Starts a new mail and sent to abc@localhost.com. To terminate the message, type a period(.) and press Enter (or) press ctrl+d and press Enter. Explanation man COMMAND: man command which is short for manual, provides in depth information about the requested command (or) allows users to search for commands related to a particular keyword. SYNTAX: The Syntax is man commandname [options] OPTIONS:
-a -k
Print a one-line help message and exit. Searches for keywords in all of the manuals available..
EXAMPLE: 1. man mkdir Display the information about mkdir command. Explanation mkdir COMMAND: mkdir command is used to create one or more directories.
-m -p -v
Set the access mode for the new directories. Create intervening parent directories if they don't exist. Print help message for each directory created.
EXAMPLE:
1. Create directory: mkdir test The above command is used to create the directory 'test'. 2. Create directory and set permissions: mkdir -m 666 test The above command is used to create the directory 'test' and set the read and write permission. Explanation more COMMAND: more command is used to display text in the terminal screen. It allows only backward movement. SYNTAX: The Syntax is more [options] filename OPTIONS:
-c -e -n +n
Clear screen before displaying. Exit immediately after writing the last line of the last file in the argument list. Specify how many lines are printed in the screen for a given file. Starts up the file from the given number.
EXAMPLE: 1. more -c index.php Clears the screen before printing the file . 2. more -3 index.php Prints first three lines of the given file. Press Enter to display the file line by line. Explanation mv COMMAND: mv command which is short for move. It is used to move/rename file from one directory to another. mv command is different from cp command as it completely removes the file from the
source and moves to the directory specified, where cp command just copies the content from one file to another. SYNTAX: The Syntax is mv [-f] [-i] oldname newname OPTIONS:
-f -i
This will not prompt before overwriting (equivalent to --reply=yes). mv -f will move the file(s) without prompting even if it is writing over an existing target. Prompts before overwriting another file.
EXAMPLE:
1. To Rename / Move a file: mv file1.txt file2.txt This command renames file1.txt as file2.txt 2. To move a directory mv hscripts tmp In the above line mv command moves all the files, directories and sub-directories from hscripts folder/directory to tmp directory if the tmp directory already exists. If there is no tmp directory it rename's the hscripts directory as tmp directory. 3. To Move multiple files/More files into another directory mv file1.txt tmp/file2.txt newdir This command moves the files file1.txt from the current directory and file2.txt from the tmp folder/directory to newdir. Explanation netstat COMMAND: nestat command displays statistics information and current state of network connections, protocol, ports/ sockets and devices. SYNTAX: The Syntax is netstat [options] OPTIONS:
-s -i -r -c -l -a
dispalys statics information about protocols. dispalys statistics information about the network interface. diplays routing table. displays statistics information and updates every second. displays information about all sockets that are in listening state. displays information about all sockets that are in listening and non-listening state.
-p
EXAMPLE:
1. To get statistics of network connections: netstat The sample output of above command:
Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 vhost:32803 LocalHost:smtp TIME_WAIT tcp 0 0 vhost:32803 google.com:http ESTABLISHED Where, Proto Recv-Q Send-Q Local Address Foreign Address State
-Specifies the Protocol used for connection. -Specifies the Number of Bytes which are not recevied. -Specifies the Number of Bytes not send to destination. -Specifies the local or source address and port. -Specifies the destination address and port. -Specifies the current state of conection to the socket. o o o ESTABLISHED - Connection is Established. TIME_WAIT - Waiting to receive packets. LISTEN - Listening to establish connection.
IP: 5193 incoming packets delivered 4813 requests sent out Tcp: 4033 segments received 4813 segments send out Icmp: 41 ICMP messages received 178 ICMP messages sent
3. To Get statistics of Network Interface: netstat -i The sample output of above command:
Kernel Interface table Iface MTU Met RX-OK RX-ERR TX-OK TX-ERR
Flg
eth0 1500 0
1308
1345
BMRU
This is the statistics information of Ethernet Card[eth0]. Explanation passwd COMMAND: passwd command is used to change your password. SYNTAX: The Syntax is passwd [options] OPTIONS:
-a -l -d -f
Show password attributes for all entries. Locks password entry for name. Deletes password for name. The login name will not be prompted for password. Force the user to change password at the next login by expiring the password for name.
EXAMPLE: 1. passwd Entering just passwd would allow you to change the password. After entering passwd you will receive the following three prompts: Current Password: New Password: Confirm New Password: Each of these prompts must be entered correctly for the password to be successfully changed. Explanation paste COMMAND: paste command is used to paste the content from one file to another file. It is also used to set column format for each line. SYNTAX: The Syntax is paste [options] OPTIONS:
-s -d
Paste one file at a time instead of in parallel. Reuse characters from LIST instead of TABs .
EXAMPLE: 1. paste test.txt>test1.txt Paste the content from 'test.txt' file to 'test1.txt' file. 2. ls | paste - - - List all files and directories in four columns for each line. Explanation pidof COMMAND:
pidof linux command is used to find the process ID of a running program. SYNTAX: The Syntax is pidof [options..] program OPTIONS:
-s -x -o
Single shot - this instructs the program to only return one pid. Scripts too - this causes the program to also return process id's of shells running the named scripts. Tells pidof to omit processes with that process id. The special pid %PPID can be used to name the parent process of the pidof program, in other words the calling shell or shell script.
EXAMPLE:
1. To find a process id of a particular console: pidof -s console This command prints the process id of the console. 3189 Explanation ping COMMAND: System administration command. Confirm that a remote host is online and responding. Ping is used for verifying connectivity between two hosts on a network. It sends Internet Control Message Protocol (ICMP) echo request packets to a remote IP address and watches for ICMP responses. SYNTAX: The Syntax is ping [options] host OPTIONS:
-a -b -c count -n -q -i -t -w
Make ping audible. Beep each time response is received. Ping a broadcast address. Stop after sending count ECHO_REQUEST packets. With deadline option, ping waits for count ECHO_REPLY packets, until the timeout expires. Show network addresses as numbers. ping normally displays addresses as host names. Quiet outputnothing is displayed except the summary lines at startup time and when finished. Specify the interval between successive transmissions. The default is one second. Set the IP Time to Live to n seconds. Exit ping after n seconds.
EXAMPLE: 1. ping google.com -c 3 Display ECHO_REQUEST 3 times only because we set count for three. 2. ping -n google.com Here the network addresses displays as numbers,normally it displays as hostnames. Explanation printf COMMAND: printf command is used to write formatted output. SYNTAX: The Syntax is printf format [argument].... OPTIONS: The format characters and their meanings are:
\b \n \t \v
EXAMPLE: 1. printf "hello\n" Use '\n' returns 'hello' to the new line. 2. printf "hel\blo" Output: helo Here '\b' is used for backspace. Explanation ps COMMAND: ps command is used to report the process status. ps is the short name for Process Status. SYNTAX: The Syntax is ps [options] OPTIONS:
-a -A or e -d -e -f -j -l
List information about all processes most frequently requested: all those except process group leaders and processes not associated with a terminal.. List information for all processes. List information about all processes except session leaders. List information about every process now running. Generates a full listing. Print session ID and process group ID. Generate a long listing.
EXAMPLE: 1. ps Output: PID TTY TIME CMD 2540 pts/1 00:00:00 bash 2621 pts/1 00:00:00 ps In the above example, typing ps alone would list the current running processes. 2. ps -f Output: UID PID PPID C STIME TTY TIME CMD nirmala 2540 2536 0 15:31 pts/1 00:00:00 bash nirmala 2639 2540 0 15:51 pts/1 00:00:00 ps -f Displays full information about currently running processes. Explanation pwd COMMAND: pwd - Print Working Directory. pwd command prints the full filename of the current working directory. SYNTAX: The Syntax is pwd [options] OPTIONS:
-P -L
The pathname printed will not contain symbolic links. The pathname printed may contain symbolic links.
EXAMPLE:
1. Displays the current working directory. pwd If you are working in home directory then, pwd command displays the current working directory as/home. Explanation restore COMMAND: restore - command restores the data from the dump-file or backup-file created using dump command. SYNTAX: The Syntax is restore [options] OPTIONS:
-f -C -i -v
Used to specify the backup or dump file Used to compare dump-file with original file Restore in Interactive mode Displays Verbose Information
-e
List the files and directories in backup file Add files in dump-file to current working directory Changes the directory Displays the current working directory Quit from the interactive mode
EXAMPLE:
Where, i -To make restore with interactive mode f -To restore from the backup-file specifed databack -Is a name of backup-file or dump-file
This command gets you to interactive mode as follows:
restore > Now the following commands are entered to restore: restore > ls -Lists files and directories in dump file restore > add -add files to the current directory restore > ls -Lists the file added from the backup file to current directory restore > extract -Extracts the file from the backup file to current directory restore > quit -Quits from the interactive mode
2. To compare and display any dump-file with the original file: restore -Cf databack This command will compare,
-1 -Is the dump-level [1 specifies incremental backup] databackup -Is a dump-file [or backup-file] /home/user1/data -Is a directory for which a backup is created
Explanation rm COMMAND: rm linux command is used to remove/delete the file from the directory. SYNTAX: The Syntax is rm [options..] [file | directory] OPTIONS:
-f -i
Remove all files in a directory without prompting the user. Interactive. With this option, rm prompts for confirmation before removing any files.
Recursively remove directories and subdirectories in the argument list. The -r (or) -R directory will be emptied of files and removed. The user is normally prompted for removal of any write-protected files which the directory contains.
EXAMPLE:
1. To Remove / Delete a file: rm file1.txt Here rm command will remove/delete the file file1.txt. 2. To delete a directory tree: rm -ir tmp This rm command recursively removes the contents of all subdirectories of the tmp directory, prompting you regarding the removal of each file, and then removes the tmp directory itself. 3. To remove more files at once rm file1.txt file2.txt rm command removes file1.txt and file2.txt files at the same time. Explanation rmdir COMMAND: rmdir command is used to delete/remove a directory and its subdirectories. SYNTAX: The Syntax is rmdir [options..] Directory OPTIONS:
-p
Allow users to remove the directory dirname and its parent directories which become empty.
EXAMPLE:
1. To delete/remove a directory rmdir tmp rmdir command will remove/delete the directory tmp if the directory is empty. 2. To delete a directory tree: rm -ir tmp
This command recursively removes the contents of all subdirectories of the tmp directory, prompting you regarding the removal of each file, and then removes the tmp directory itself. Explanation route COMMAND: route command displays routing table resides in kernel and also used to modify the routing table.The tables which specifies how packets are routed to a host is called routing table. SYNTAX: The Syntax is route [options] OPTIONS:
-n -e add del
dispalys routing table in numerical[IP Address] format dispalys routing table in Hostname format Adds a new route to the routing table Deletes a route from the routing table
Indicate the target is network Indicate the target is host Specifies the gateway of target host/network Used to specifiy the subnet-mask of destination network/host Specify the device or interface where the packets will be sent rejects the packets sent to particular route/host
EXAMPLE:
1. To dispaly the routing table: route -n The above command will print:
Destination Gateway Genmask Flags Metric Ref 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0
Use 0 0 0
In above table: Destination -Indicates the IP address of desination host/network Gateway -Indicates gateway from which desination host/network could be reached Genmask -Indicates the subnetmask destination Flags -Indicates the current status of route o U - Route is up
o o Iface
2. To add static route to a network in the routing table: route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.1.1 dev eth0
In above command: add -Indicates that the route is added to routing table. -net -Indicates that desination is a network. 192.168.0.1 -Indicates IP address of destination network. netmask -Indicates the subnetmask of destination network. gw 192.168.1.1 -Indicates the gateway of destination network. dev eth0 -Indicates that the packets are routed via the interface eth0.
3. To delete a route from the routing table: route del -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.1.1 dev eth0 The above command will delete the route to 192.168.1.0 from the routing table. Explanation sort COMMAND: sort command is used to sort the lines in a text file. SYNTAX: The Syntax is sort [options] filename OPTIONS:
-r -u
EXAMPLE: 1. sort test.txt Sorts the 'test.txt'file and prints result in the screen. 2. sort -r test.txt Sorts the 'test.txt' file in reverse order and prints result in the screen. Explanation sed COMMAND: sed is a stream editor. sed command helps to edit or delete all occurrences of one string to another within a file. It takes a file as input and prints the result on screen or redirects the output to a specified file. SYNTAX: The Syntax is sed [options] '{command}' [filename]
-n -e -E
do not output the trailing newline enable interpretation of the backslash-escaped characters listed below disable interpretation of those sequences in STRINGs
\NNN the character whose ASCII code is NNN (octal) \a \b \c \f \n \r \t \v alert (BEL) backspace suppress trailing newline form feed new line carriage return horizontal tab vertical tab
EXAMPLE: Lets assume that we have a file file1.txt and it has the following data.
hscripts has many valuable free scripts It is the parent site of www.forums.hscripts.com hscripts include free tutorials and free gif images free DNS lookup tool Purchase scripts from us A webmaster/web master resource website
1. sed G file1.txt>file2.txt 2. In the above example, using the sed command with G would double space the file file1.txt and output the results to the file2.txt. 3. sed = file1.txt | sed 'N;s/\n/\. /' In the above example, sed command is used to output each of the lines in file1.txt with the line number followed by a period and a space before each line. 4. sed 's/scripts/javascript/g' file1.txt Opens the file file1.txt and searches for the word 'scripts' and replaces every occurrence with the word 'javascript'. 5. sed -n '$=' file1.txt The above command count the number of lines in the file1.txt and output the results. Explanation Shutdown COMMAND: Shutdown - Turn off the computer immediately or at a specified time. Shutdown / Turn off brings the system down in a secure way. All logged-in users are notified that the system is going down, and login(1) is blocked. It is possible to shut the system down immediately or after a specified delay. All processes are first notified that the system is going down by the signal SIGTERM. This gives programs like vi(1) the time to save the file being edited, mail and news processing programs a chance to exit cleanly, etc. Shutdown does its job by signalling the init process, asking it to change the runlevel. Runlevel 0 is used to halt the system, runlevel 6 is used to reboot the system, and runlevel 1 is used to put to system into a state where administrative
tasks can be performed; this is the default if neither the -h or -r flag is given to shutdown. To see which actions are taken on halt or reboot see the appropriate entries for these runlevels in the file /etc/inittab. SYNTAX: The Syntax is /sbin/shutdown [-t sec] [-arkhncfFHP] time [warning-message] OPTIONS:
-a -t sec -k -r -h -H -P -f -F -c
Use /etc/shutdown.allow. Tell init(8) to wait sec seconds between sending processes the warning and the kill signal, before changing to another runlevel. Dont really shutdown; only send the warning messages to everybody. Reboot after shutdown. Halt or poweroff after shutdown. Halt action is to halt or drop into boot monitor on systems that support it. Halt action is to turn off the power. Skip fsck on reboot. Force fsck on reboot. Cancel an already running shutdown.
EXAMPLE:
-l -b -n -c number -n number
To specify the units of lines. To specify the units of blocks. To specify how many lines you want to display. The number option-argument must be a decimal integer whose sign affects the location in the file, measured in bytes. The number option-argument must be a decimal integer whose sign affects the location in the file, measured in lines.
EXAMPLE: 1. tail index.php It displays the last 10 lines of 'index.php'. 2. tail -2 index.php It displays the last 2 lines of 'index.php'. 3. tail -n 5 index.php It displays the last 5 lines of 'index.php'. 4. tail -c 5 index.php It displays the last 5 characters of 'index.php'. Explanation tar COMMAND: tar command is used to create archive and extract the archive files. SYNTAX: The Syntax is tar [options] [archive-file] [File or directory to be archived] OPTIONS:
-c -x -f -t -u -v -A
Creates Archive Extract the archive creates archive with give filename displays or lists files in archived file archives and adds to an existing archive file Displays Verbose Information Concatenates the archive files
EXAMPLE:
1. To archive a directory or file : tar -cvf backup.tar /etc This command creates a tarfile called backup.tar which is the archive of /etc directory.
Where, /dev/fd0 - Is a floppy-disk name where the archive is stored /home/user1/HGB - Is a directory archived
3. To Extract the archive:
tar -xvf backup.tar This command will extract the backup.tar file 4. To List The File In An Archive: tar -tvf backup.tar The above command will display the files and directories that archived in backup.tar. Explanation useradd COMMAND: useradd - Adds new user to the linux system, with specified user-name. When a new user is added then a corresponding entry is made in files /etc/passwd, /etc/group and /etc/shadow SYNTAX: The Syntax is useradd [options] [username] OPTIONS:
-d -s -g -G -M -e -uid
Specifies the users home directory Specifies the users shell Specifies the users primary group Specifies the users secondary groups Specifies not to create home directory for the user Specifies the expire date of the user Specifies the user-id of the user
EXAMPLE:
1. To add new user: useradd hiox This command will add a new user with name hiox. 2. To add user but not allow to login in the system: useradd -s /bin/nologin hiox This command will add user hiox but not allow to login.
In above command: hiox -Is the user-name /bin/nologin -Is Shell assigned to the user
3. To set expire date of the user: useradd -e 2008-06-30 hiox This command will add user hiox and set the expire date to 2008-06-30.
am i -b -d -H -i -m -q -T,-w
Print the username of the invoking user, The 'am' and 'i' must be space separated. Prints time of last system boot. print dead processes. Print column headings above the output. Include idle time as HOURS:MINUTES. An idle time of . indicates activity within the last minute. Same as who am i. Prints only the usernames and the user count/total no of users logged in. Include user's message status in the output.
EXAMPLE: 1. who -uH Output: NAME LINE TIME IDLE PID COMMENT hiox ttyp3 Jul 10 11:08 . 4578 This sample output was produced at 11 a.m. The "." indiacates activity within the last minute. 2. who am i who am i command prints the user name. Explanation whois COMMAND: whois command lists the information about the domain owner of the given domain. SYNTAX: The Syntax is whois [option] query OPTIONS:
-h -p
Host which holds the identification information in its database. connect to the specified port.
EXAMPLE: 1. whois hscripts.com Output: The above command will produce the following output.
[Querying whois.internic.net] [Redirected to whois.PublicDomainRegistry.com] [Querying whois.PublicDomainRegistry.com] [whois.PublicDomainRegistry.com] Registration Service Provided By: HIOX INDIA Contact: +91.4226547769 Domain Name: HSCRIPTS.COM Registrant: HIOX INDIA Rajesh Kumar (support@hioxindia.com) 32, North Street, Krishnapuram, Singanallur Coimbatore tamil nadu,641005 IN Tel. +91.04225547769 Creation Date: 06-Oct-2004 Expiration Date: 06-Oct-2008 Domain servers in listed order: ns1.hscripts.com ns2.hscripts.com Administrative Contact: HIOX INDIA Rajesh Kumar (support@hioxindia.com) 32, North Street, Krishnapuram, Singanallur Coimbatore tamil nadu,641005 IN Tel. +91.04225547769 Technical Contact: HIOX INDIA Rajesh Kumar (support@hioxindia.com) 32, North Street, Krishnapuram, Singanallur Coimbatore tamil nadu,641005 IN Tel. +91.04225547769 Billing Contact: HIOX INDIA
Rajesh Kumar (support@hioxindia.com) 32, North Street, Krishnapuram, Singanallur Coimbatore tamil nadu,641005 IN Tel. +91.04225547769 Status:ACTIVE The data in this whois database is provided to you for information purposes only, that is, to assist you in obtaining information about or related to a domain name registration record. We make this information available "as is", and do not guarantee its accuracy. By submitting a whois query, you agree that you will use this data only for lawful purposes and that, under no circumstances will you use this data to: (1) enable high volume, automated, electronic processes that stress or load this whois database system providing you this information; or (2) allow, enable, or otherwise support the transmission of mass unsolicited, commercial advertising or solicitations via fascimile, electronic mail, or by telephone. The compilation, repackaging, dissemination or other use of this data is expressly prohibited without prior written consent from us. The registrar of record is PublicDomainRegistry. We reserve the right to modify these terms at any time. By submitting this query, you agree to abide by these terms.
This sample output was produced at 11 a.m. The "." indicates activity within the last minute. Explanation yes COMMAND: yes command repeatedly prints the given string separated by a space and followed by a newline until it is killed. If no string is given, it just prints 'y' repeatedly until it is killed. It is normally used in scripts, its output is piped to a command or program that prompts you to do this or that (do you want to delete this file press 'y' or 'n') SYNTAX: The Syntax is yes [string..] yes [options..] OPTIONS:
--help Print help message and exit -Print version and exit version
EXAMPLE:
1. Print the given string repeatedly: yes "hscripts" The above command will print hscripts repeatedly until it is killed(CTRL+C). 2. To delete a file without pressing any key when it prompts: yes | rm -i *.txt In the above example, the yes command is piped with rm command. Normally rm -i will prompt you to remove the file, to remove the file you have to type either y(yes) or n(no). When it is piped with yes by default, the yes will print y and all the txt files will be removed automatically, so that you dont need to type y for every txt files. yes n | rm -i *.txt The above example says not to remove a file when rm -i prompts to remove the file.