Beruflich Dokumente
Kultur Dokumente
http://www.games-workshop.com/gws/content/printArticle.jsp?aId=14...
1
Gore Type One
4
4.50
5
Step 1 Paint up your soon-to-be gory surface as you add all paints to cart would normally. Step 2 Paint on little blurbs of Scab Red to demarcate the blood-splatter basecoat. Step 3 Mix in a bit of Blood Red with Scab Red and dab on some more spatter mix over the basecoat. Step 4 Continue the gore highlights by dabbing thick globs of Blood Red over the surface. Step 5 Add a coat of gloss varnish to make your blood shine like it was freshly spilt. (Ewww, that's gross.)
Scab Red
Blood Red
add to cart
4
4.50
5
Step 1 Paint up your soon-to-be blood-streaked add all paints to cart surface as you would normally. Step 2 Take a thin, wide brush, and separate the bristles with your fingers to spread them apart. Step 3 With Scab Red on your brush, move the spread bristles carefully across your surface in one direction only. Use this technique a few times to create a streak effect. Step 4 Repeat this streak technique, but this time around, use Blood Red. Step 5 Again, use a little Gloss Varnish to freshen up your blood-streaked model. (Ugh, I'm getting queasy...)
Blood Red
Scab Red
4
4.50 Step 1 Paint up your soon-to-be gore-spattered add all paints to cart surface as you would normally. Step 2 Take a thin, wide brush, and practice flicking the bristles in one direction. Step 3 Dip your brush in some Scab Red and flick the paint onto your surface. This technique is absolutely random and messy! Be sure to set up a backdrop to catch the flying paint, and wear crappy clothes. Step 4 Flick more paint at your target, but this time use Blood Red. Coat with Gloss Varnish as needed. (Please...no more!)
Blood Red
Scab Red
4
4.50
5
Step 1 Paint up your soon-to-be gristle-and-chunkyadd all paints to cart gore-coated surface as you would normally. Step 2 Gather some fine sand and static grass. Step 3 Mix in the sand and grass with your paints and water it down slightly. You will be rewarded with a textured paint that resembles blood-soaked gristle and hair. Step 4 Basecoat with Blood Red mixed with a bit of Scab Red. Apply this mix in any one of the manners described above - it's up to you. Step 5 Add a coat of Blood Red and gristle. Coat with Gloss Varnish as needed. (Oh man...nasty!)
Blood Red
Scab Red
1 von 1
12.11.2010 10:28