Beruflich Dokumente
Kultur Dokumente
Double-anchored ballscrews:
Haas uses only premium-quality ballscrews and guides that meet the highest quality standards in the industry. Haas ballscrews are anchored at both ends and pre-tensioned, then inspected for 100% parallelism to the axis guides.
High-speed spindles:
Maintaining the proper chip load during high-speed machining is crucial. The latest high-speed spindles from Haas provide 10,000, 15,000 or 30,000 rpm of cutting speed to take full advantage of the time savings and increased accuracy possible with todays high-speed machining.
Through-spindle coolant:
The Haas through-spindle coolant options improve tool life and allow higher speeds, deep hole drilling and blind pocket milling. The result is high productivity and reduced cycle times. Haas engineers have designed a special seal which disengages when the system is not in use. This exclusive design feature extends the life of the system. The standard TSC option provides 300 psi (20 bar) at a flow rate of 1.5 gallons (5.7 L) per minute, and 250 psi (17 bar) at 4 gpm (15 Lpm). The 1000 psi option has a max flow rate of 6 gpm (23 Lpm), and requires separate (customer-supplied) 3-phase power. In both systems, actual pressure will vary with the diameter of the coolant passages in the tool.
High-speed machining:
The HSM option provides a powerful tool to reduce cycle times and improve accuracy. Using a motion algorithm called acceleration before interpolation, combined with full look-ahead of up to 80 blocks, HSM provides fast contouring feeds without distortion of the programmed path. The Haas HSM option accepts ISO standard G code, and is a fraction of the cost of other high-speed controls.
TABLE
Width ............................................... Length ............................................. Maximum Weight on Table .............. T-slot Width ..................................... Center Distance ............................... 18" (457 mm) 36" (914 mm) 3000 lb (1361 kg) 0.625" (15.875 mm) 4.92" (125 mm)
TRAVELS
Maximum X axis .............................. 30" (762 mm) Maximum Y axis .............................. 20" (508 mm) Maximum Z axis............................... 20" (508 mm) Spindle nose to table ....................... 4" 24" (102 610 mm) 100% ball bar testing ensures three-dimensional squareness and accuracy.
SPINDLE
Taper Size ....................................... Spindle Speed ................................. Max Power Rating ........................... Max Torque ..................................... Spindle Bearings.............................. Spindle Orientation .......................... #40 Taper 0 to 7500 rpm (10K, 15K, and 30K optional) 20 hp (15 kW) 75 ft-lb (102 Nm) @ 1400 rpm ABEC Class 7 Electronic
TOOL CHANGER*
Fully Enclosed Tool Storage Tool Capacity................................... Tool Type......................................... Maximum Tool Diameter.................. Maximum Tool Weight ..................... Tool Changer Type .......................... 20 standard; 24 optional CT40 or BT40 3.5" (89 mm), assuming full carousel 12 lb (5.4 kg), assuming full carousel All electric, bidirectional
FEEDRATES
Rapids on X, Y, Z Axes.................... 1000 ipm (25.4 m/min) Maximum Cutting Rate .................... 650 ipm (16.5 m/min)
AXIS MOTORS
X, Y Max Thrust Rating.................... 2550 lb (11,343 N) Z Max Thrust Rating ........................ 4200 lb (18,683 N)
A B C D
FRONT VIEW E F G H I J K L M 88.0" (2235 mm) 64.0" (1626 mm) 42.95" (1091 mm) 32.0" (813 mm) 35.5" (902 mm) 30.0" (762 mm) 27.54" (700 mm) 21.81" (554 mm) 33.0" (838 mm)
SHIPPING DIMENSIONS
Pallet Size........................................ 114" x 98" x 103" (2896 x 2489 x 2616 mm) Weight ............................................. 7500 lb (3402 kg)