Beruflich Dokumente
Kultur Dokumente
ms_office
weight of top drive, block, hook, elevators, kelly etc. excess BHA weight in mud (lbs) = BHA = Lbha = weight of BHA in mud (lbs) length of BHA (ft)
Round Trip Ton-Miles: Drilling Ton-Miles [ hole drilled only = 2 * ( T2 - T1 ) ]: Drilling Ton-Miles [ hole reamed once = 3 * ( T2 - T1 ) ]: Drilling Ton-Miles [ hole reamed twice = 4 * ( T2 - T1 ) ]: Casing Ton-Miles [ use jnt length/weight of casing, C = 0 ]:
627
Tc = Tr 291
Page 1
Work per unit length cut when operating at a safety factor of 5. Size of rope
1 ins 1 1/8 ins 1 1/4 ins 1 3/8 ins 1 1/2 ins 1 5/8 ins 1 3/4 ins 1 7/8 ins 2 ins 2 1/8 ins 2 1/2 ins
In order to ensure a change of the point of drum crossover, where the wear and crushing is very severe the following sho Note: the tabel above. Add 1/4 lap for counterbalanced groove drums Add 1/2 lap for all other drum types.
9 11 11 12
8 10 11 11 15
9 10 11 14
9 9 10 13
9 12
11
10
and crushing is very severe the following should be added to the number of cut off laps as listed in