Beruflich Dokumente
Kultur Dokumente
GEZE APOLL ROLLER-GUIDED GEARS FOR SLIDING DOORS, END-FOLDING AND CENTRE-FOLDING DOORS
GEZE Apoll The roller sliding door fitting system for particularly heavy industrial doors Apoll for sliding doors Apoll for end-folding doors Apoll fr centre-folding doors Apoll accessories for end-folding and centre-folding sliding doors Product information for sliding door gears
4 5 20 27 33 39
GEZE Apoll
GEZE APOLL
The roller sliding door fitting system for particularly heavy industrial doors
Apoll, the largest roller sliding door fitting system from GEZE, can be used to implement all heavy sliding door systems, such as, car park sliding gates. Apoll has already proved itself to be successful in conveyor and moving systems and as mounting aids in trade and industry. The sendzimir galvanisation of the steel running rail and the other parts ensure high protection from corrosion. Product features For door leaves elements with up to 600 kg Suitable for all sliding doors and door materials Wall and floor installation Durable solutions with single and double roller carriages No contamination due to the closed runner Prismatic running rail ensure optimal operation Hardened steel rollers, ball bearing mounted Ball bearing mounted plastic rollers for particularly quiet operation Movable hanger available in three strengths Individual radii for running rails available on request. Designs: Single or double roller carriage with steel or plastic rollers Standard version/Scope of delivery: Steel, sendzimir galvanised running rails All other parts galvanised
Load-bearing capacity of track with 700 mm bracket spacing: Size 0 Size 1 Size 2 150 kg/m 350 kg/m 600 kg/m
Size 0 Size 1 Size 2
Fig. 05-1
GEZE Apoll
Material of rollers steel plastic steel plastic steel plastic steel plastic steel steel
Permissible door weight of sliding doors 75 kg 50 kg 150 kg 100 kg 175 kg 100 kg 350 kg 200 kg 300 kg 600 kg
*)
Size 0
Size 1
Size 2
= yes,
= no
GEZE Apoll
ca. alle 70 cm
Schwerpunkt
Fig. 06-2
Note: The fittings are identified by numbers. The numbering is based on the following system: The number before the dash indicates the fitting size, the number after the dash the part number. That is to say, the number after the dash is the specific part identifier. The number before the dash changes according to the fitting size. Examples: 1-10 = GEZE Apoll size 1, Side-fixing bracket No. 10 2-10 = GEZE Apoll size 2, Side-fixing bracket No. 20 0-55 = GEZE Apoll size 0, Curved floor channel No. 55
a4 a5 b1 b2 d d1 e
0-1 1-1 2-1
g1 h2 h3 h3 h4 k l l1
m m1 p t u v w
Fig. 07-1
= side-fixing = soffit-fixing Side and soffit-fixing with console, door with edge-fixing
2
Size 0 45 45 20,5 50 15 22-37 max. 14 11 32 22,5 152-190 152-190 62-78 62-78 22 60 M 10 80 80 35 30-46
a1 a1
2
a2 a3 a6 b c1 d2
0-20 1-20 2-20 0-20 1-20 2-20
e f1 g g
h1 h1 k1
l3 m1 u1
Fig. 07-2
u2 w1
Size 0 a2 c
on soft mounting surfaces bolt in steel plate
0-22 1-22
f g2 g3 g3
0-22 1-22
h2 h5
= side-fixing = soffit-fixing
Fig. 08-1
Join bracket
Size 0 l2 90
Size 1 130
Size 2 180
Fig. 08-2
Welding bracket
Size 0 l 45
Size 1 65
0-13 1-13
Fig. 08-3
a4 a5 b1 b2 d d1 e g1
0-31 1-31
0-42 1-42
h2 h3 h3 h4 k l l1 m
m1 n p t u v w
30 = yes, = no
Fig. 09-1
= side-fixing = soffit-fixing
2
a1
2
0-20 1-20 0-20 1-20
a1 a2 a3 a6 c
0-41 1-41 0-14 1-14 2-14 0-14 1-14 2-14
c1 d2 e f1 g g h1 h1 k1 l m1 n1 p t
0-51 1-51
Fig. 09-2
u w
Track
Load capacity per m with 700 mm bracket spacing: ID No. (6m) 025769
Track curve
Fig. 10-2
10
ID No.
Soffit-fixing bracket
= yes,
Joint bracket
11
GEZE Apoll
Welding bracket
Fig. 12-1
Fig. 12-2
12
Size 0
side-fixing soffit-fixing
Des. h1 h2 h3 h4 a b l n d e
70
Fig. 13-1
g m f c kg (weight) ID No.
Adjustment range
Size 0
side-fixing soffit-fixing
Des. h1 h2 a b l n d e g m
Fig. 13-2
f c kg (weight) ID No.
Adjustment range
13
Size 1 1-30 0-36 65 48 80 21 42 M 12 78-101 0,6 max. 100 kg max. 50 kg 012468 054050
h1 kg (weight)
Fig. 14-1
Size 1 1-31 0-37 65 48 150 114 42 37 42 M 12 20 78-101 1,2 max. 200 kg max. 100 kg 012651 054051
Size 2 2-31 85 68 190 140 56 48 56 M 16 25 101-129 2,7 max. 300 kg 009484 = yes, = no
0-31 0-37 50 35 100 80 32 26 32 M 10 13 60-83 0,5 max. 100 kg max. 50 kg 017274 054046
14
1,5
ID No.
Size 0 Des. a b l m h c e d n
Fig. 15-2
15
Door plate
Des. l
1
a s d e
No. of fixing-holes
kg (weight) ID No.
Manual sliding door systems
Size 0 0-43 60 22-37 80 80 M 10 6,5 0,2 019138 1-43/1 80 30-46 128 73 M 12 8,5 0,6 012947
Fig. 16-1
Des. a b l c
Double-sided hanger
d e kg (weight) ID No.
Des. l a
Fig. 16-2
s n d e
Edge-fixing hanger
No. of fixing-holes
kg (weight) ID No.
Des. l a s n d e
Fig. 16-2
No. of fixing-holes
kg (weight) ID No.
16
Des. l
1
a s d e
No. of fixing-holes
kg (weight) ID No.
2 2
Fig. 17-1
Floor channel
ID No.
Des. l a s n d
Fig. 17-2
e
No. of fixing-holes
kg (weight) ID No.
4 4
Des. l a s n d e
No. of fixing-holes
kg (weight) ID No.
Fig. 17-2
17
GEZE Apoll
Fig. 18-1
Door stop
18
Door stop Brackets and consoles Side-fixing bracket Soffit-fixing bracket Joint bracket Welding bracket Bracket for vertical and lateral adjustment Single console for vertical and lateral adjustment Double console for vertical and lateral adjustment Rollers Single roller, steel Single roller, plastic Double roller, steel Double roller, plastic Single roller with pivot bearing *) Single roller with pivot bearing *) Pivot bearing Door plates and edge-fixing hangers Door plate pivot point 18 mm pivot point 60 mm Edge-fixing hanger pivot point 20 mm pivot point 90 mm for door thickness 22-37 mm Double-sided hanger for door thickness 30-46 mm for door thickness 44-60 mm Guide rollers Flat-plate guide roller pivot point 18 mm pivot point 60 mm Edge-fixing guide roller pivot point 20 mm pivot point 90 mm bearing length 6 m Floor channel, galvanized cut to size radius 0700 mm, blank Curved floor channel radius 0800 mm, blank Curve 900 radius 1000 mm Accessories Wall-fixed door stop = yes,
*)
012661 012663 019138 012947 012946 019884 020404 020522 012665 011139
051654 051655
= no
For sliding doors with curved track the rollers with pivot bearings should be used.
19
GEZE Apoll
The leaves fold out only in one direction. Because of the eccentric load when the door is folded, a bottom guide roller is essential. There are three common fitting options: Butt surface-mounted Butt flush-mounted Rebate-mounted. The roller forms the pivot point on the front face of every second leaf. A full-height swing leaf is only possible with an odd number of leaves.
The most usual form of track mountingis by side- or soffit-fixing brackets. Flush bolts should be fitted to the fold-out side. The floor guide rollers should be fitted plump underneath the pivot point of the rollers. The best leaf widths are between 600 mm and 900 mm. Use 3 hinges per leaf; for high leaves ( 280 cm) 4. Hinges with ball bearings are recommended. Starting with the end leaf hinged to the jamb, every second leaf is fitted with a roller with pivot bearing and edge-fitting hanger. When choosing the track size and the roller, it should be noted that each roller has to take approximately the weight of two leaves. The use of double rollers is recommended. In the fold area the brackets for track mounting should be spaced at 350 mm (increased load-bearing).
Fig. 20-1
20
Execution 1
Execution 2
by customers
a b c f z
= = = = =
leaf width leaf thickness 1/2 hinges +1 25 with size 0 number of leaves
B B a
= = =
a a1 b c d n
= = = = = =
leaf width, leaf hinged to jamb leaf width 2. leaf leaf thickness 1/2 hinges +1 b/2 60 with size 0
z B a a1 a1 B
= = = = =
= a
a+a1
Fig. 21-1
Size 0 22 45 45 80 M 10 60 22 5 110 20 35
21
0-65 1-65
0-1 1-1
The gaps between the individual leaves when closed up are not taken into account in calculating the leaf width. The leaf width should be adjusted according to choise of gap width.
a a1
= =
leaf width, leaf hinged to jamb a2 = a3 ... an leaf width of following leaves leaf thickness 1/2 hinges +1 b/2 number of leaves 18 with size 0 clearance width
a1 a1 a a B B z
= =
= = = = =
b c d z n1 B
= = = = = =
Fig. 22-1
Size 2 30 85 M 16 30 40 8 220 53 30 35
22
a1 = a2 = a3 b c
= = =
Fig. 23-1
Butt flush-mounted Butt flush-mounted, soffit mounting with soffit-fixing bracket -11, track -1, double roller with pivot bearing -33, edge-fixing hanger -41, floor guide roller -51 and flush bolt -65, floor channel -54.
b/2 c a1 + a2 a
= = = =
half door thickness 1/2 hinge roller +1 leaf width leaf width - (n+b/2+c)
Edge-fixing hanger
The leaf fitted at the blind frame is smaller than leaf a by the dimension (n+b/2+c)
Removable cover
Fig. 23-2
23
GEZE Apoll
Mounting option for end-folding doors: Rebate-mounted Rebate-mounted Rebate-mounted, wall mounting with side-fixing bracket -10, track -1, double roller with pivot bearing -33, edge-fixing hanger for end-folding doors -44, edge-fixing guide roller for end-folding doors -53 and flush bolt -65, floor channel -54. Size 0 0-44 0-53 Dim. Dim. 25 20,5 Size 1 1-44 1-53 32 26,5 Size 2 2-44 2-53 39,5 35
a1 = a2 = a3 b c
= = =
Edge-fixing hanger
Manual sliding door systems
Fig. 24-1
STANDARD DRAWINGS FOR END-FOLDING DOORS Drawing Side- and soffit-fixing GEZE Apoll Size 0 Side-fixing with side-fixing bracket GEZE Apoll Size 1 Soffit-fixing with soffit-fixing bracket GEZE Apoll Size 1 Soffit-fixing with single console for vertical and lateral adjustment GEZE Apoll Size 1 GEZE Apoll Size 2 ID No. 10620/0-10 10621/0-10 10621/0-11 10621/0-12 10622/0-12
24
1 track, length = twice leaf width + 100 mm, cut to size 1 side-fixing bracket per 700 mm track length 1 double roller with pivot bearing or 1 double roller with pivot bearing, reduced version or 1 single roller with pivot bearing pivot point 118 mm pivot point 160 mm 1 edge-fixing hanger pivot point 120 mm pivot point 190 mm or 1 edge-fixing hanger for end-folding doors pivot point 118 mm pivot point 160 mm 1 edge-fixing guide roller pivot point 120 mm pivot point 190 mm or 1 edge-fixing guide roller for end-folding doors 1 floor channel for end-folding doors, cut to size (length as track) 82 x 35 mm 1 flush bolt 120 x 45 mm 3 to 4 hinges per leaf with ball bearing rings supplied by customer For soffit-fixing 1 soffit-fixing bracket per 700 mm track length or 1 height-adjustable soffit-fixing per 700 mm track length, consisting of single console and bracket
051012
012670 012672 050995 051650 049974 013474 013474 051015 051650 051655
-11
023286
012691
012119
-20 -14
024325 024126
013772 013097
007197
Fittings as for 2-leaf unit, track and floor channel in length for 2-leaf width, but hinges for 3 leaves = yes, = no Summary of fittings 4-leaf end-folding door, see next page
25
012661 012663
Fitting No.
ID No. Size 0
ID No. Size 1
ID No. Size 2
1 track, length = width of 4 leaves + 100 mm, cut to size 1 side-fixing bracket per 700 mm track length (in fold area per 350 mm) 2 double rollers with pivot bearing or 2 double rollers with pivot bearing, reduced version or 2 single rollers with pivot bearing pivot point 118 mm pivot point 160 mm 2 edge-fixing hangers pivot point 120 mm pivot point 190 mm or 2 Trgerwinkel fr Falttren pivot point 118 mm pivot point 160 mm 2 edge-fixing guide rollers pivot point 120 mm pivot point 190 mm or 2 edge-fixing guide rollers for end-folding doors 1 floor channel, cut to size (length as track) 82 x 35 mm 2 flush bolts 120 x 45 mm 3 to 4 hinges per leaf with ball bearing rings supplied by customer For soffit fixing 1 soffit-fixing bracket per 700 mm track length or 1 height-adjustable soffit-fixing per 700 mm track length, consisting of single console and bracket
-1 -10 -33 -35 -32 0-41 0-42 1-41 1-42 -44 0-51 0-52 1-51 1-52 -53 -54 0-65 1-65
051655 013474
-11
023286
012691
012119
-20 -14
024325 024126
013772 013097
007197
4-leaf end-folding door: (2 leaves each folding to left and right resp., track etc.)
as 2x2-leaf unit, but with 2 edge-fixing hangers pivot point 160 mm pivot point 190 mm pivot point 160 mm pivot point 190 mm pivot point 90 mm 0-42 1-42 0-52 1-52 1-52 019019 012663 020522 012672 012672
= yes,
= no Ordering information GEZE Apoll end-folding door gear size ... number of leaves ... folding to right (left) , side-fixing (or soffit-fixing) ... block frame clearance height and width (H, B)
26
The best leaf widths are between 600 mm and 900 mm. Use 3 hinges per leaf; for high leaves ( 280 cm) 4. Hinges with ball bearings are recommended. The first leaf is fitted with a roller; thereafter every second leaf. When choosing the track size and the roller, it should be noted that each roller has to take approximately the weight of two leaves. The use of double rollers is recommended. In the fold area the brackets for track mounting should be spaced at 350 mm (increased load-bearing).
27
0-65 1-65
0-54 1-54
by customers
The gaps between the individual leaves when closed up are not taken into account in calculating the leaf width. The leaf width should be adjusted according to choise of gap width.
a a
= =
first leaf a2 = a3 ... an leaf width of following leaves leaf thickness 1/2 hinges +1 number of full leaves
B a a a1 B B B
= = = = =
b c z
= = =
= =
Fig. 28-1
Size 0 22 45 45 80 M 10 22 5 110 20 35
28
Size 0
0-40 1-40 2-40
Size 2 85 M 16 40 8 220 53 30 35
Manual sliding door systems
k l m1 p t u w x y
22 45 M 10 22 5 110 35 14 20,5
30
Fig. 29-1
STANDARD DRAWINGS FOR CENTRE-FOLDING DOORS Drawing Side- and soffit-fixing GEZE Apoll Size 0 Side-fixing Soffit-fixing GEZE Apoll Size 1 GEZE Apoll Size 2 GEZE Apoll Size 1 GEZE Apoll Size 2 ID No. 10620/0-20 10621/0-20 10622/0-20 10621/0-21 10622/0-21
29
GEZE Apoll
a1 = a2 = a3 ... an width of following leaves a = width of the first leaf to blind frame
Fig. 30-1
Manual sliding door systems
Soffit-fixing Soffit-fixing With single console -20, bracket for vertical and lateral adjustment -14, track -1, double roller with pivot bearing -33, door plate -40, flat-plate guide roller -50, flush bolt -65, floor channel -54. With soffit-fixing bracket -11, track -1, double roller with pivot bearing -33, door plate -40, flat-plate guide roller -50, flush bolt -65, floor channel -54.
Fig. 30-2
Side-fixing Side-fixing With single console -20, bracket for vertical and lateral adjustment -14, track -1, double roller with pivot bearing -33, door plate -40, flat-plate guide roller -50, flush bolt -65, door channel -54. With side-fixing bracket -10, track -1, double roller with pivot bearing -33, door plate -40, flat-plate guide roller -50, flush bolt -65, door channel -54.
Fig. 30-3
30
1 track, length = 1 x leaf width + 100 mm, cut to size 1 soffit-fixing bracket per 700 mm track length or 1 single console for vertical and lateral adjustment with 1 soffit-fixing bracket per 700 mm track length 1 double roller with pivot bearing or 1 double roller with pivot bearing, reduced version or 1 single roller with pivot bearing 1 door plate 1 flat-plate guide roller 1 floor channel, length as track, cut to size 82 x 35 mm 2 flush bolts 120 x 65 mm 3 to 4 hinges per leaf with ball bearing rings supplied by customer For side-fixing 1 side-fixing bracket per 700 mm track length
-1 -11 -20 -14 -33 -35 -32 -40 -50 -54 0-65 1-65
051506 023286 024325 024126 050997 054044 050996 018431 019884 051650 049974
051473 021691 013772 013097 049950 054052 051021 012658 012665 051650 013474
051472 012119
-10
020701
012686
011554
1 track, length = 3 x leaf width + 100 mm, cut to size 1 soffit-fixing bracket per 700 mm track length (in fold area per 350 mm) or 1 single console for vertical and lateral adjustment with 1 bracket for vertical and lateral adjustment per 700 mm track length 2 double rollers with pivot bearing or 2 double rollers with pivot bearing, reduced version or 2 single rollers with pivot bearing 2 door plates 2 flat-plate guide rollers 1 door channel, length as track, cut to size 82 x 35 mm 3 flush bolts 120 x 65 mm 3 to 4 hinges per leaf with ball bearing rings supplied by customer For side-fixing 1 side-fixing bracket per 700 mm track length (in fold area per 350 mm) = yes, = no
-1 -11
051506 023286
051473 012691
051472 012119
-20 -14 -33 -35 -32 -40 -50 -54 0-65 1-65
-10
020701
012686
011554
Summary of fittings 4 1/2-leaf centre-folding door fitting systems, see next page
31
Summary of fittings
ID No. Size 0
ID No. Size 1
ID No. Size 2
1 track, length = 3 x leaf width + 100 mm, cut to size 1 soffit-fixing bracket per 700 mm track length (in fold area per 350 mm) or 1 single console for vertical and lateral adjustment with 1 bracket for vertical and lateral adjustment per 700 mm track length 2 double rollers with pivot bearing or 2 double rollers with pivot bearing, reduced version or 2 single rollers with pivot bearing 2 door plates 2 flat-plate guide rollers 1 door channel, length as track, cut to size 82 x 35 mm 4 flush bolts 120 x 65 mm 3 to 4 hinges per leaf with ball bearing rings supplied by customer For side-fixing 1 side-fixing bracket per 700 mm track length (in fold area per 350 mm) = yes, = no
-1 -11
051506 023286
051473 021691
051472 012119
-20 -14 -33 -35 -32 -40 -50 -54 0-65 1-65
-10
020701
012686
011554
Ordering information GEZE APOLL centre-folding door gear Size ....., No. of full leaves ..... (+1/2 leaf per folding side), Folding to right (left), block frame clearance height and weight (H, B) Side-fixing (or soffit-fixing)
32
1,5
ID No.
Load ID No.
Fig. 33-3
33
n h1
Fig. 34-1
34
0,5
ID No.
35
Door plate
Double-sided hanger
36
180
ID No.
37
Flush bolt
Fig. 38-1
38
Application for similar fittings Sliding gear with horizontally installed objects, e.g., drawer guides or gear with vertical runner tracks must be handled according to their respective characteristics with respect to product information, use for intended purpose, misuse, product performance, product maintenance and servicing, and duty of information and Product Performance In cases where the performance of the product is not specifically instruction. described in the catalogues, brochures, instructions etc., special requirements must be discussed with and agreed by the manufacturer. Our regulations, which affect the composition of the sliding door gear, are binding.
39
G E Z E D O O R T E C H N O LO G Y A N D G L A S S S Y S T E M S
GEZE GmbH P.O. Box 1363 71226 Leonberg Germany GEZE GmbH Reinhold-Vster-Strae 21-29 71229 Leonberg Germany Telefon +49 (0) 7152-203-0 Telefax +49 (0) 7152-203-310 www.geze.com
GEZE Service GmbH NL Sdwest Reinhold-Vster-Strae 25 71229 Leonberg Tel. +49 (0) 7152-92 33 34 GEZE Service GmbH NL Nord-Ost Bhringstrae 8 13086 Berlin (Weissensee) Tel. +49 (0) 30-47 02 17 32 GEZE Service GmbH NL West Nordsternstrae 65 45329 Essen Tel. +49 (0) 201-8 30 82 16 GEZE Service GmbH NL Mitte Adenauerallee 2 61440 Oberursel Tel. +49 (0) 6171-63 61 03 GEZE Service GmbH NL Sd Keltenring 10 85658 Egmating Tel. +49 (0) 8095-87 13 61 Austria GEZE Austria GmbH Mayrwiesstrae 12 5300 Hallwang b. Salzburg Tel. +43-(0)662-663142 Fax +43-(0)662-663142-15 E-Mail: austria.at@geze.com Baltic States GEZE GmbH Baltic States office Dzelzavas iela 120 S 1021 Riga Tel. +371 (0) 67 89 60 35 Fax +371 (0) 67 89 60 36 E-Mail: office-latvia@geze.com Benelux GEZE Benelux B.V. Leemkuil 1 Industrieterrein Kapelbeemd 5626 EA Eindhoven Tel. +31-(0)40-26290-80 Fax +31-(0)40-26 290-85 E-Mail: benelux.nl@geze.com Bulgaria GEZE Bulgaria - Trade Representative Office 61 Pirinski Prohod, entrance B, 4th floor, office 5, 1680 Sofia Tel. +359 (0) 24 70 43 73 Fax +359 (0) 24 70 62 62 E-Mail: office-bulgaria@geze.com
China GEZE Industries (Tianjin) Co., Ltd. Shuangchenzhong Road Beichen Economic Development Area (BEDA) Tianjin 300400, P.R. China Tel. +86(0)22-26973995-0 Fax +86(0)22-26972702 E-Mail: Sales-info@geze.com.cn GEZE Industries (Tianjin) Co., Ltd. Branch Office Shanghai Unit 25N, Cross Region Plaza No 899, Ling Ling Road, XuHui District 200030 Shanghai, P.R China Tel. +86 (0)21-523 40 960 Fax +86 (0)21-644 72 007 E-Mail: chinasales@geze.com.cn GEZE Industries (Tianjin) Co., Ltd. Branch Office Guangzhou Room 17C3 Everbright Bank Building, No.689 Tian He Bei Road 510630 Guangzhou P.R. China Tel. +86(0)20-38731842 Fax +86(0)20-38731834 E-Mail: chinasales@geze.com.cn GEZE Industries (Tianjin) Co., Ltd. Branch Office Beijing Rm3A02, Building 3 ZhuBang 2000 Business Plaza No.98, Balizhuang xili Chaoyang District 100025 Beijing, P.R.China Tel. +86 (0)10-8797 5177 /-78 Fax +86 (0)10-8797 5171 E-Mail: chinasales@geze.com.cn France GEZE France S.A.R.L. ZAC de lOrme Rond RN 19 77170 Servon Tel. +33-(0)1-606260-70 Fax +33-(0)1-606260-71 E-Mail: france.fr@geze.com Hungary GEZE Hungary Kft. Bartk Bla t 105-113. Budapest H-1115 Tel. +36 (1) 481 4670 Fax +36 (1) 481 4671 E-Mail: office-hungary@geze.com Iberia GEZE Iberia S.R.L. Pol. Ind. El Pla C/Comerc, 2-22, Nave 12 08980 Sant Feliu de Llobregat (Barcelona) Tel. +34(0)9-02194036 Fax +34(0)9-02194035 E-Mail: info@geze.es
India GEZE India Private Ltd. MF 2 & 3, Guindy Industrial Estate Ekkattuthangal Chennai 600 097 Tamilnadu Tel. +91 44 3061 6900 Fax +91 44 3061 6901 E-Mail: office-india@geze.com Italy GEZE Italia Srl Via Giotto, 4 20040 Cambiago (MI) Tel. +3902950695-11 Fax +3902950695-33 E-Mail: italia.it@geze.com GEZE Engineering Roma Srl Via Lucrezia Romana, 91 00178 Roma Tel. +3906-7265311 Fax +3906-72653136 E-Mail: roma@geze.biz Poland GEZE Polska Sp.z o.o. ul. Annopol 21 03-236 Warszawa Tel. +48 (0)22 440 4 440 Fax +48 (0)22 440 4 400 E-Mail: geze.pl@geze.com Romania GEZE Romania s.r.l. IRIDE Business Park, Str. Dimitrie Pompeiu nr. 9-9a, Building 10, Level 2, Sector 2, 020335 Bucharest Tel.: +40 (0) 21 25 07 750 Fax: +40 (0) 21 25 07 750 E-Mail: office-romania@geze.com Russian Federation GEZE GmbH Representative Office Russia Kolodesnij pereulok3, str. 25 Office Nr. 5201-5203 107076 Moskau Tel. +7 (0) 49 55 89 90 52 Fax +7 (0) 49 55 89 90 51 E-Mail: office-russia@geze.com Scandinavia Sweden GEZE Scandinavia AB Mallslingan 10 Box 7060 18711 Tby, Sweden Tel. +46(0)8-7323-400 Fax +46(0)8-7323-499 E-Mail: sverige.se@geze.com Scandinavia Norway GEZE Scandinavia AB avd. Norge Industriveien 34 B 2073 Dal Tel. +47(0)639-57200 Fax +47(0)639-57173 E-Mail: norge.se@geze.com
Scandinavia Finland Branch office of GEZE Scandinavia AB Herralantie 824 Postbox 20 15871 Hollola Tel. +358(0)10-4005100 Fax +358(0)10-4005120 E-Mail: finland.se@geze.com Scandinavia Denmark GEZE Danmark Branch office of GEZE Scandinavia AB Hje Taastrup Boulevard 53 2630 Taastrup Tel. +45(0)46-323324 Fax +45(0)46-323326 E-Mail: danmark.se@geze.com South Africa DCLSA Distributors (Pty.) Ltd. 118 Richards Drive, Halfway House, Ext 111 P.O. Box 7934, Midrand 1685 Tel. +27(0)113158286 Fax +27(0)113158261 E-Mail: info@dclsa.co.za Switzerland GEZE Schweiz AG Bodenackerstrasse 79 4657 Dulliken Tel. +41-(0)62-2855400 Fax +41-(0)62-2855401 E-Mail: schweiz.ch@geze.com Turkey GEZE GmbH Trkiye - stanbul rtibat Brosu Ataehir Bulvar, Ata 2/3 Plaza Kat: 9 D: 84 Ataehir Kadky / stanbul Tel. + 90 (0) 21 64 55 43 15 Fax + 90 (0) 21 64 55 82 15 E-Mail: office-turkey@geze.com Ukraine Reprsentanz GEZE GmbH Ukraine ul. Vikentiya Hvoyki, 21, office 151 04080 Kiev Tel. +38 (0) 44 49 97 725 Fax +38 (0) 44 49 97 725 E-Mail: office-ukraine@geze.com United Arab Emirates/GCC GEZE Middle East P.O. Box 17903 Jebel Ali Free Zone Dubai Tel. +971(0)4-8833112 Fax +971(0)4-8833240 E-Mail: geze@emirates.net.ae United Kingdom GEZE UK Ltd. Blenheim Way Fradley Park Lichfield Staffordshire WS13 8SY Tel. +44(0)1543443000 Fax +44(0)1543443001 E-Mail: info.uk@geze.com
Germany GEZE Sonderkonstruktionen GmbH Planken 1 97944 Boxberg-Schweigern Tel. +49 (0) 7930-9294-0 Fax +49 (0) 7930-9294-10 E-Mail: sk.de@geze.com GEZE GmbH Niederlassung Nord/Ost Bhringstrae 8 13086 Berlin (Weissensee) Tel. +49 (0) 30-47 89 90-0 Fax +49 (0) 30-47 89 90-17 E-Mail: berlin.de@geze.com GEZE GmbH Niederlassung West Nordsternstrae 65 45329 Essen Tel. +49 (0) 201-83082-0 Fax +49 (0) 201-83082-20 E-Mail: essen.de@geze.com GEZE GmbH Niederlassung Mitte Adenauerallee 2 61440 Oberursel (b. Frankfurt) Tel. +49 (0) 6171-63610-0 Fax +49 (0) 6171-63610-1 E-Mail: frankfurt.de@geze.com GEZE GmbH Niederlassung Sd Reinhold-Vster-Strae 21-29 71229 Leonberg Tel. +49 (0) 7152-203-594 Fax +49 (0) 7152-203-438 E-Mail: leonberg.de@geze.com
G E Z E R E P R E S E N TAT I V E