Beruflich Dokumente
Kultur Dokumente
SECTION
BCS
CONTENTS
PRECAUTIONS ......................................................... 2 . Precautions for Supplemental Restraint System (SRS) AIR BAG and SEAT BELT PRE-TENSIONER ................................................................. 2 . BCM (BODY CONTROL MODULE) .......................... 3 . System Description ................................................. 3 . BCM FUNCTION .................................................. 3 . COMBINATION SWITCH READING FUNCTION 3 ..... CAN COMMUNICATION CONTROL ................... 6 . BCM STATUS CONTROL .................................... 6 . SYSTEMS CONTROLLED BY BCM DIRECTLY 7 ..... SYSTEMS CONTROLLED BY BCM AND IPDM E/R ....................................................................... 7 . SYSTEMS CONTROLLED BY BCM AND COMBINATION METER ............................................... 7 . SYSTEMS CONTROLLED BY BCM AND INTELLIGENT KEY UNIT ............................................... 7 . MAJOR COMPONENTS AND CONTROL SYSTEM ...................................................................... 8 . CAN Communication System Description ............... 8 . Schematic ................................................................ 9 . BCM Terminal Arrangement .................................. 11 . Terminals and Reference Values for BCM ............. 12 . BCM Power Supply and Ground Circuit Check ..... 16 . CONSULT-II Function (BCM) ................................ 17 . CONSULT-II START PROCEDURE ................... 17 . ITEMS OF EACH PART ..................................... 17 . WORK SUPPORT .............................................. 18 . CAN Communication Inspection Using CONSULTII (Self-Diagnosis) .................................................. 18 . Configuration ......................................................... 19 . DESCRIPTION ................................................... 19 . READ CONFIGURATION PROCEDURE ........... 19 . WRITE CONFIGURATION PROCEDURE ......... 21 . Removal and Installation of BCM .......................... 25 . REMOVAL .......................................................... 25 . INSTALLATION .................................................. 25 .
BCS
BCS-1
2007 Versa
PRECAUTIONS PRECAUTIONS PFP:00001 Precautions for Supplemental Restraint System (SRS) AIR BAG and SEAT BELT PRE-TENSIONER
The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. Information necessary to service the system safely is included in the SRS and SB section of this Service Manual. WARNING: G To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer. G Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see the SRS section. G Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.
EKS00IW5
BCS-2
2007 Versa
BCM (BODY CONTROL MODULE) BCM (BODY CONTROL MODULE) System Description
BCM (body control module) controls the operation of various electrical units installed on the vehicle.
PFP:284B2
A
EKS00I81
BCM FUNCTION
BCM has a combination switch reading function for reading the operation of combination switches (light, wiper, washer, turn signal) in addition to the function for controlling the operation of various electrical components. Also, it functions as an interface that receives signals from the front air control, and sends signals to ECM using CAN communication.
2.
BCS
SKIB7592E
3.
BCM - Operation table of combination switch G BCM reads operation status of combination switch by the combination shown in the following table.
BCS-3
2007 Versa
SKIB7614E
NOTE: Headlamp has a dual system switch. 4. Example operation: (When lighting switch 1st position is turned ON) G When lighting switch 1st position is turned ON, contact in combination switch turns ON. At this time if OUTPUT 4 transistor is activated, BCM detects that voltage changes in INPUT 5. G When OUTPUT 4 transistor is ON, BCM detects that voltage changes in INPUT 5, and judges lighting switch 1st position is ON. Then BCM sends tail lamp ON signal to IPDM E/R using CAN communication. G When OUTPUT 4 transistor is activated again, BCM detects that voltage changes in INPUT 5 and recognizes that lighting switch 1st position is continuously ON.
BCS-4
2007 Versa
SKIB7615E
5.
NOTE: Each OUTPUT terminal transistor is activated at 10ms intervals. Therefore, after a switch is turned ON, electrical loads are activated with a time delay. But this time delay is so short that it cannot be noticed. J Operation mode G Combination switch reading function has operation modes as follows: BCS Normal status G When BCM is not in sleep status, OUTPUT terminals (1-5) each turn ON-OFF every 10ms. Sleep status L
BCS-5
2007 Versa
When BCM is in sleep mode, transistors of OUTPUT 1 and 5 stop the output, and BCM enters low-current-consumption mode. OUTPUTS (2, 3, and 4) turn ON-OFF at 60ms intervals, and receives lighting switch input only.
PKIB6124E
BCS-6
2007 Versa
G G
BCM is activated with low current consumption mode. CAN communication is not active. When CAN communication operation is detected, it switches to CAN communication status. When a state of the following switches changes, it switches to CAN communication state: Ignition switch Key switch (without Intelligent Key) Key switch and ignition knob switch (with Intelligent Key) Hazard switch Door lock/unlock switch Front door switch (LH, RH) Rear door switch (LH, RH) Back door lock assembly Combination switch (passing, lighting switch 1st position, front fog lamp) Keyfob (lock/unlock signal) Front door key cylinder switch LH When control performed only by BCM is required by switch, it shifts to CAN communication inactive mode. Status of combination switch reading function is changed.
Power door lock system. Refer to BL-23, "POWER DOOR LOCK SYSTEM" . Remote keyless entry system. Refer to BL-54, "REMOTE KEYLESS ENTRY SYSTEM" .
NOTE
Power window system. Refer to GW-17, "POWER WINDOW SYSTEM" . G Room lamp timer. Refer to LT-91, "INTERIOR ROOM LAMP" . G Rear wiper and washer system. Refer to WW-30, "REAR WIPER AND WASHER SYSTEM" . NOTE: Power supply only. No system control.
G G G
Panic system. Refer to BL-54, "REMOTE KEYLESS ENTRY SYSTEM" . Vehicle security (theft warning) system. Refer to BL-193, "VEHICLE SECURITY (THEFT WARNING) BCS SYSTEM" . NVIS(NATS) system. Refer to BL-212, "NATS (Nissan Anti-Theft System)" . Headlamp, tail lamp and battery saver control systems. Refer to LT-75, "PARKING, LICENSE PLATE AND L TAIL LAMPS" , LT-5, "HEADLAMP (FOR USA)" or LT-27, "HEADLAMP (FOR CANADA) - DAYTIME LIGHT SYSTEM -" . Front fog lamp. Refer to LT-41, "FRONT FOG LAMP" . M Front wiper and washer system. Refer to WW-4, "FRONT WIPER AND WASHER SYSTEM" . Rear window defogger system. Refer to GW-50, "REAR WINDOW DEFOGGER" . Warning chime. Refer to DI-47, "WARNING CHIME" . Turn signal and hazard warning lamps. Refer to LT-51, "TURN SIGNAL AND HAZARD WARNING LAMPS" . Intelligent Key system. Refer to BL-80, "INTELLIGENT KEY SYSTEM" .
BCS-7
2007 Versa
Output All door locking actuators Turn signal lamp (LH, RH) Combination meter (turn signal lamp) All door locking actuators Turn signal lamp (LH, RH) Combination meter (turn signal lamp)
G G G
G G
Power door lock system Power supply (IGN) to power window Power supply (BAT) to power window Panic alarm
Front power door lock/unlock switch (LH, RH) Ignition power supply Battery power supply
G G G G
All door locking actuators Power supply to power window system Power supply to power window system IPDM E/R
Battery saver control Headlamp Tail lamp Front fog lamp Turn signal lamp
Turn signal lamp Combination meter Turn signal lamp Combination meter
Hazard lamp
Hazard switch
G G
Key switch Keyfob Main power window and door lock/unlock switch Front door switch LH All door switch Key switch Front door switch LH Combination switch Key switch Front door switch LH Seat belt buckle switch LH Ignition switch Combination switch Ignition switch Combination meter (warning buzzer) Combination meter (warning buzzer) Combination meter (warning buzzer) Interior room lamp
G G
G G G
G G
G G G G
Front wiper and washer system Rear window defogger Rear wiper and washer system A/C switch signal Blower fan switch signal A/C indicator signal Low tire pressure warning system
IPDM E/R IPDM E/R Rear wiper motor ECM ECM A/C indicator Combination meter
EKS00I82
Front air control Front air control Front air control Remote keyless entry receiver
BCS-8
2007 Versa
BCS
LKWA0367E
BCS-9
2007 Versa
LKWA0368E
BCS-10
2007 Versa
BCS
LIIA2443E
BCS-11
2007 Versa
BCM (BODY CONTROL MODULE) Terminals and Reference Values for BCM
Terminal Wire color Signal name Signal input/ output Measuring condition Ignition switch Operation or condition
EKS00I85
BR
Input
ON
SKIA5291E
GR
Input
ON
SKIA5292E
Input
ON
SKIA5291E
Combination switch input 2 Input ON Lighting, turn, wiper OFF Wiper dial position 4
SKIA5292E
BR
Front door key cylinder switch LH (unlock) Front door key cylinder switch LH (lock)
Input OFF
ON (open, 2nd turn) OFF (closed) On (open) OFF (closed) Rear window defogger switch ON Rear window defogger switch OFF Ignition switch ACC or ON ON (open) OFF (closed) ON (open) OFF (closed)
Momentary 1.5V 0V Momentary 1.5V 0V 0V 5V Battery voltage 0V Battery voltage 0V Battery voltage 5V 0V
Input
Rear window defogger switch Ignition switch (ACC or ON) Front door switch RH
Input
ON
11 12
L SB
Input Input
ACC or ON OFF
13 15 18
GR W V
Rear door switch RH Tire pressure warning check connector Remote keyless entry receiver (ground)
BCS-12
2007 Versa
Terminal
Signal name
B
19 BR Remote keyless entry receiver (power supply) Output OFF Ignition switch OFF
C
LIIA1893E
D
Stand-by (keyfob buttons released) Remote keyless entry receiver signal (signal)
LIIA1894E
20
Input
OFF When remote keyless entry receiver receives signal from keyfob (keyfob buttons pressed)
LIIA1895E
21
Input/ Output
OFF ON
Ignition switch (OFF ON) Goes OFF illuminates (Every 2.4 seconds)
Just after turning ignition switch ON: Pointer of tester should move for approx. 1 second, then return to battery voltage. Battery voltage 0V Just after turning ignition switch ON: Pointer of tester should move for approx. 1 second, then return to battery voltage.
23
Output
OFF
25
LG
Input/ Output
OFF ON
BCS
L
26 GR Thermo control amp. Input ON A/C switch ON
M
ZJIA0719J
27
Input
ON
A/C switch OFF A/C switch ON Front blower motor OFF Front blower motor ON ON OFF Back door open (switch closed)
28
Input
ON
29
Hazard switch
Input
OFF
30*1
Output
Back door closed (switch open) All doors locked (SW OFF) All doors unlocked (SW ON)
30*2
Input
BCS-13
2007 Versa
Terminal
Signal name
32
LG
Output
ON
SKIA5291E
33
Output
ON
SKIA5292E
34
Output
ON
SKIA5291E
35
Combination switch output 2 Output ON Lighting, turn, wiper OFF Wiper dial position 4
36
SKIA5292E
37 38 39 40 43
G W L P R
Key switch Ignition switch (ON) CAN-H CAN-L Back door switch
OFF ON OFF
Battery voltage 0V Battery voltage 0V Battery voltage 0 Battery 0V Battery voltage 0V Battery voltage 0V Battery voltage 0V Battery voltage 0V Battery voltage
44
LG
Input
ON
45
GR
Lock switch
Input
OFF
ON (lock) OFF
46
Unlock switch
Input
OFF
ON (unlock) OFF
47
BR
Input
OFF
48
Input
OFF
49
Output
OFF
BCS-14
2007 Versa
Terminal
Signal name
50
SB
A/C indicator
C
0 Battery voltage 0V Battery voltage Battery voltage 0V Battery voltage
56
60
Output
ON
Turn left ON
SKIA3009J
I
61 W Turn signal (right) Output ON Turn right ON
J
SKIA3009J
63
BR
Interior room lamp All door lock actuators (lock) Front door lock actuator RH, rear door lock actuators LH/RH (unlock) Ground
Output
OFF
BCS
65
SB
Output
OFF
66
Output
OFF
67
Input
ON
68
Output
More than 45 seconds after ignition switch OFF When front door LH or RH is open or power window timer operates
69 70
P Y
Output Input
OFF OFF
BCS-15
2007 Versa
BCM (BODY CONTROL MODULE) BCM Power Supply and Ground Circuit Check
EKS00I86
11 M18 38
Ground
Battery voltage
LIIA2415E
Ground
Battery voltage
57 M20 70
Ground
Battery voltage
Ground
Battery voltage
LIIA0915E
BCS-16
2007 Versa
B
WORK SUPPORT DATA MONITOR ACTIVE TEST Supports inspections and adjustments. Commands are transmitted to the BCM for setting the status suitable for required operation, input/output signals are received from the BCM and received data is displayed. Displays BCM input/output data in real time. Operation of electrical loads can be checked by sending drive signal to them. Displays BCM self-diagnosis results. The results of transmit/receive diagnosis of CAN communication can be read. BCM part number can be read. Performs BCM configuration read/write functions.
Inspection by part
SELF-DIAG RESULTS CAN DIAG SUPPORT MNTR ECU PART NUMBER CONFIGURATION
BCM Power door lock system Rear defogger Warning chime Room lamp timer Remote keyless entry system Headlamp Wiper Turn signal lamp Hazard lamp Blower fan switch signal Air conditioner switch signal Intelligent Key Combination switch NVIS (NATS) Interior lamp battery saver Back door Theft alarm Retained accessory power control
BCS
AIR CONDITIONER INTELLIGENT KEY COMB SW IMMU BATTERY SAVER TRUNK THEFT ALARM RETAINED PWR
BCS-17
2007 Versa
Contents displayed No malfunction>>Inspection End Malfunction in CAN communication system>>After printing the monitor items, go to CAN System. Refer to LAN-7, "TROUBLE DIAGNOSIS" .
BCS-18
2007 Versa
H
PAIA0070E
2.
BCS
L
BCIA0029E
3.
Touch BCM on SELECT SYSTEM screen. If "BCM" is not indicated, go to GI section. Refer to GI-40, "CONSULT-II Data Link Connector (DLC) Circuit" .
BCIA0030E
BCS-19
2007 Versa
LKIA0169E
5.
BCIA0031E
6.
Touch C11 (SPEC1) and "OK" on VEHICLE SELECT screen. For canceling, touch "CANCEL" on "VEHICLE SELECT" screen. NOTE: Confirm vehicle model on IDENTIFICATION PLATE. Refer to GI-47, "Model Variation" .
LKIA0807E
7.
LKIA0547E
BCS-20
2007 Versa
G
WKIA3039E
9.
LKIA0395E
BCS
PAIA0070E
BCS-21
2007 Versa
BCIA0029E
3.
Touch BCM on SELECT ITEM screen. If "BCM" is not indicated, go to GI section to check CONSULT II data link connector (DLC) circuit. Refer to GI-40, "CONSULT-II Data Link Connector (DLC) Circuit" .
BCIA0030E
4.
LKIA0169E
5.
BCIA0031E
6.
Touch C11 (SPEC1) and "OK" on VEHICLE SELECT screen. For canceling, touch "CANCEL" on "VEHICLE SELECT" screen. NOTE: Confirm vehicle model on IDENTIFICATION PLATE. Refer to GI-47, "Model Variation" .
LKIA0807E
BCS-22
2007 Versa
LKIA0547E
8.
G
LKIA0175E
9.
Using the following flow chart, identify the correct model and configuration list. Confirm and/or change setting value for each item according to the configuration list. Depending on CONSULT-II software version being used, some or all of the write configuration items shown in the following configuration lists may be displayed. If an item does not appear on the CONSULTII "WRITE CONFIGURATION" screen(s), then it is an auto setting item and it cannot be manually set or changed. NOTE: Confirm vehicle model on IDENTIFICATION PLATE. Refer to GI-47, "Model Variation" .
ITEM KEYLESS ENTRY I-KEY DTRL THEFT ALARM SET VAL WITH WITHOUT WITH WITHOUT WITH WITHOUT WITH WITHOUT
BCS
10. Touch "CHNG SETTING" on "WRITE CONFIGURATION" screen. CAUTION: Make sure to touch "CHNG SETTING" even if the indicated configuration of brand-new BCM is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model cannot be memorized. 11. Touch OK on "WRITE CONFIGURATION" screen. If "CANCEL" is touched, it will return to previous screen.
LKIA0397E
BCS-23
2007 Versa
LKIA0398E
13. WRITE CONFIGURATION results are printed out automatically. Confirm "WRITE CONFIGURATION" is correctly executed by comparing sheet automatically printed out with applicable configuration list shown in step 9.
WKIA3040E
LKIA0400E
BCS-24
2007 Versa
WKIA5672E
INSTALLATION
Installation is in the reverse order of removal. NOTE: G When replacing BCM, it must be configured. Refer to BCS-19, "Configuration" . G When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to BL-212, "NATS (Nissan Anti-Theft System)" . G When replacing BCM, if new BCM does not come with keyfobs attached, all existing keyfobs must be reregistered.
BCS
BCS-25
2007 Versa
BCS-26
2007 Versa