Beruflich Dokumente
Kultur Dokumente
Martin Vosloo Paints Paint Master Contractors TDS ISSUE 1 June 11Page 1 of 2 Product Description Paint Master Contractors is a cost Effective water based ,good opacity Matt Pain t for thoseareas where you want a matt finish to Cover Marks/Imperfections Cost Effectively Application Areas
Primed Wood/Metal
Good Opacity
Low odour.
Quick drying 2 coats can be applied in one day. Product Data Resin Base Acrylic resin emulsion Drying Time Touch dry: 1 hour Hard dry: 4-6 hours Film Thickness 25-35 microns per coat Spreading Rate 6-8SQM per 1 litreAlthough the spreading rate will vary with porosity and typeof substrate, for uncoated new surfaces work on 5-7 squaremeters per litre for the first coat and 7-9 square meters per litre for subsequent coats and for when ap plied to sealed,previously painted substrates. Application Details
Application Method
Thinning This Product is ready for use un-thinned; thinning with water will reduce its hi
ding power.
Application
With brush or roller apply a generous coat of Paint Master Contractors to the ar ea thatneeds protecting.
This Product is ready for use un-thinned; thinning with water will reduce its hi ding power.
Do not apply before 09:00 and after 16:00 in the winter. Surface Preparation
Rusted Metal
Affected areas need to be cleaned back to bright metal and spot primed with Wate r basedMetal Primer.
Martin Vosloo Paints Paint Master Contractors TDS ISSUE 1 June 11Page 2 of 2
New Metal
Degrease surfaces with a Galvanized Iron Cleaner to remove the manufacturers grea seprotective layer. This process is repeated until the surface is water break fr ee.
Prime the Clean Degreased Metal with a water based Metal Primer
Wood
Fill all visible cracks and seal with Paint Master WB Plaster Primer.
Previously PaintedSurfaces
Remove all dust, grease, foreign material, fungal and algae growth.
Allow to dry.
If then powdery or friable, seal with Paint Master Bonding Liquid or WB Plaster Primer
This Product is not flammable, contains no toxic substances and only low levels of VOC(EU regulations). Disclaimer Martin Vosloo Paints can not be held liable if the product fails due to improper surfacepreparation or application. Martin Vosloo Paints 011-7083166/083-2671122 martinvosloo@mweb.co.za