Beruflich Dokumente
Kultur Dokumente
ISO/IEC 10745:1995
Australian Standard™
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
Information technology—
Open Systems Interconnection—
Upper layers security model
This Australian Standard was prepared by Committee IT/1, Information Systems —
Interconnection. It was approved on behalf of the Council of Standards Australia on
18 March 1998 and published on 5 June 1998.
Review of Australian Standards. To keep abreast of progress in industry, Australian Standards are subject
to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is
important therefore that Standards users ensure that they are in possession of the latest edition, and any
amendments thereto.
Full details of all Australian Standards and related publications will be found in the Standards Australia
Catalogue of Publications; this information is supplemented each month by the magazine ‘The Australian
Standard’, which subscribing members receive, and which gives details of new publications, new editions
and amendments, and of withdrawn Standards.
Suggestions for improvements to Australian Standards, addressed to the head office of Standards Australia,
are welcomed. Notification of any inaccuracy or ambiguity found in an Australian Standard should be made
without delay in order that the matter may be investigated and appropriate action taken.
Australian Standard™
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
Information technology—
Open Systems Interconnection—
Upper layers security model
PREFACE
This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee
IT/1, Information Systems — Interconnection. The Standard is the result of a consensus among
representatives on the Joint Committee that it be produced as an Australian Standard. It is identical
with and has been reproduced from ISO/IEC 10745:1995, Information technology — Open Systems
Interconnection — Upper layers security model.
As this Standard is reproduced from an international Standard, the following applies:
(a) Its number does not appear on each page of text and its identity is shown only on the cover
and title page.
(b) In the source text ‘this International Standard’ should read ‘this Australian Standard’.
(c) A full point substitutes for a comma when referring to a decimal marker.
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
CONTENTS
Page
1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.1 Identical Recommendations International Standards . . . . . . . . . . . . . . . . . . . . . 2
2.2 Paired Recommendations International Standards equivalent in technical content . 2
3 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5 Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
6 Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 7
6.1 Overall model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 7
6.2 Security associations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 8
6.3 Security exchange functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.4 Security transformations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8 Layer interactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.1 Interactions between Application and Presentation Layers . . . . . . . . . . . . . . . . . 17
8.2 Interactions between Presentation and Session Layers . . . . . . . . . . . . . . . . . . . . 17
8.3 Use of lower layer services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Annex B — Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
iv
NOTES
1
AUSTRALIAN STANDARD
1 Scope
1.1 This Recommendation International Standard defines an architectural model that provides a basis for:
a) the development of application-independent services and protocols for security in the upper
layers of OSI; and
b) the utilization of these services and protocols to fulfil the security requirements of a wide
variety of applications, so that the need for application-specific ASEs to contain internal
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
b) the support in the upper layers of the security services defined in the OSI Security
Architecture and the Security Frameworks for Open Systems;
c) the positioning of, and relationships among, security services and mechanisms in the upper
layers, according to the guidelines of CCITT Rec. X.800 ISO 7498-2 and ITU-T Rec.
X.207 ISO/IEC 9545.
d) the interactions among the upper layers, and interactions between the upper layers and the
lower layers, in providing and using security services;
1.3 With respect to access control, the scope of this Recommendation International Standard includes
services and mechanisms for controlling access to OSI resources and resources accessible via OSI.
b) specification of security techniques and mechanisms, their operation, and their protocol
requirements; or
c) aspects of providing security which are not concerned with OSI communications.
NOTE — The scope of this Recommendation International Standard includes security for connectionless applications and
for distributed applications (such as store-and-forward applications, chained applications, and applications acting on behalf of other
applications).
2 Normative references
The following Recommendations and International Standards contain provisions which, through reference in
this text, constitute provisions of this Recommendation International Standard. At the time of publication,
the editions indicated were valid. All Recommendations and Standards are subject to revision, and entities to
agreements based on this Recommendation International Standard are encouraged to investigate the possibi-
lity of applying the most recent editions of the Recommendations and Standards listed below. Members of
IEC and ISO maintain registers of currently valid International Standards. The Telecommunication
Standardization Bureau of the ITU maintains a list of currently valid ITU-T Recommendations.
COPYRIGHT
This is a free preview. Purchase the entire publication at the link below: