Beruflich Dokumente
Kultur Dokumente
potentially contaminated soil, the soil must be assigned a hazard category A, B, C, D, or E as per SCHEDULE II and/or SCHEDULE III PART C of the HAZARDOUS WASTES (MANAGEMENT, HANDLING AND TRANSBOUNDRY MOVEMENT) Rules, 2008, and standardized Toxicity Characteristic Leachate Procedure (TCLP). Soils are considered potentially contaminated if they: have been mixed with any wastes, or, consist of, or partially consist of, soil of unknown origin that has been brought onto a site, or, arise from sites where former uses include industrial, commercial, mining or agricultural activities, or, have had manufactured chemicals applied onto them.
For the purpose of categorizing the soils, the site should be divided into domains (areas or layers of material on the site with same probable soil hazard category) or stockpiles (refers to soils that are ex-situ. Stockpiles need to be prepared from soils of like material. Where an existing stockpile consists of materials that are likely to differ in hazard category, they should be managed as individual stockpiles for the purpose of categorization) representing similar material types (e.g. fill, natural soil or rock), similar contamination, and other site-specific features as indicated by the site history (e.g. presence of underground storage tank areas, etc). The objective of the preliminary site investigation is to identify appropriate depth and corresponding soil volume, for soil to be categorized for appropriate management using in-situ sampling (prior to disturbance).
Once domains and soil volume(s) have been identified, it is necessary to determine the minimum number of samples to be drawn. It is necessary to collect, as at least, the numbers of samples listed in Table 1 or Table 2 (depending on volume) and, after analyzing all samples, determine the hazard category by using the result of the highest contaminant (as mentioned above).
For example, if the results of three samples indicate that the sample with the highest concentration is Category B contaminated then the entire volume must be managed as Category B soil.
Alternatively, one may choose to categorize the soil volume (less than 200 m3) based on the 95%UCLaverage (the 95% upper confidence limit of the average concentration of the sampling results) provided that a sufficient amount of sample data is available.
Table 1: Minimum number of samples for in-situ 200 m3 or less (Minimum of 3 then 1:25 plus bulking factor of 33%) Soil volume m3 No. of samples 25 or < 25 3 50 3 75 4 100 5 125 7 150 8 175 9 200 10 >200 1:25
Table 2: Minimum number of samples for stockpile 200 m3 or less (Minimum of 3 then 1:25) Soil volume m3 No. of samples 25 or < 25 3 50 3 75 3 100 4 125 5 150 6 175 7 200 8 >200 1:25
samples to enable the calculation of a 95%UCLaverage that more accurately represents contaminant levels.
Table 3: Minimum number of samples for stockpile 200 m3 or less (Minimum of 3 then 1:25) Soil volume m3 No. of Samples @ 1:25 300 400 500 600 700 800 900 1000 1500 2000 2500 3000 4000 4500 5000 >5000 12 16 20 24 28 32 36 40 60 80 100 120 160 180 200 1:25 No. of samples
Calculation of 95%UCLaverage
The 95%UCLaverage demonstrates with 95% confidence that the average contaminant concentration of the soil represented by the data set is at or below the concentration stated. A minimum of 10 samples is recommended for 95%UCLaverage calculation. For large soil volumes (i.e. >2500 m3) the minimum sampling rate should not be less than 1 sample per 250 m 3.
A 250 m3 stockpile is to be categorized for deciding appropriate handling protocols. Preliminary site investigation demonstrates that contaminant of concern is arsenic. It is required to categorize the stockpile as Fill Material or Contaminated Soil (for Fill Material the categorization threshold is: Total Arsenic Concentration 20 mg.kg-1; Category A refers to Prescribed Industrial Wastes if having pH 4 or pH 9; Category B refers to Categorization Thresholds: TCLP 2.8 mg.L-1 and Total Concentration 2000 mg.kg-1 for Arsenic; Category C refers to Categorization Thresholds: TCLP 0.7 mg.L-1 and Total Concentration 500 mg.kg-1 for Arsenic) #. It has been determined that the stockpile under study is not of Category A. (# Classification assumed for illustrative purpose).
1.
A stockpile of 250 m3 requires: i. Samples to be taken at 1 in 25 m3 (total of 10 samples) and for the soil to be categorized based on the highest concentration sample result, or,
ii. 2.
A minimum of 10 samples are to be taken and tested for total concentrations and the leachable concentration.
3.
The Total Arsenic Concentrations in these 10 samples are: 5, 10, 18, 20, 25, 28, 30, 40, 43, 45 mg.kg-1
4.
Mean = 26.4 mg.kg-= Standard deviation S = 13.59 mg.kg-1. The coefficient of variation (CV) = S /
= 0.515.
5. Determine the
t (, n 1) value from the Standard Statistical Tables. For 10 samples, with 95% confidence, t (95, 9) = 1.833.
7.
UCL mean = +[ t (, n 1)] [S/n] UCL mean = Upper Confidence Limit of the Arithmetic Mean Concentration of the
sampling area at the 1- confidence level. = The probability that the true mean concentration of the sampling area might exceed the n
UCL mean
= Number of sample measurements. = Arithmetic Mean of all sample measurements. = A test statistic (Students t and a level of significance and n-1 degrees of freedom). = Standard Deviation of the sample measurements.
t (, n 1) S
8. The leachability of the soils now needs to be determined. The leachable concentration for categorization can be calculated using the same 95%UCLaverage methodology discussed above. If the CV is > 1.2 it indicates that the data set may be log normal and, in this case, 95%UCLaverage must be calculated using a different method. We assume for the purpose for this example that the 95%UCLaverage leachable concentration = 0.5 mg.L-1.
9. Therefore, as per the Categorization Thresholds mentioned above, the appropriate categorization of the stockpile under study is Category C and is not suited as Fill Material.
10. Category C and Category B Contaminated soil can be accepted at CHWTSDF, therefore the management options include On-Site Remediation, Off-Site Remediation and Disposal at CHWTSDF. Category A Contaminated soil will require treatment to reduce or control the attribute before meeting acceptance criteria.
11. Sometimes it may be necessary to submit a classification and a handling protocol application to the SPCB/MoEF for approval, where it can be demonstrated that a different category from that outlined above is appropriate for a particular waste. For example, a contaminant that is intrinsically immobilized (without treatment) may display a low hazard because of the very low leachable concentration, despite a relatively high total concentration. Such applications will need to provide justification as to why the proposed classification and handling protocol will achieve the best environmental outcome. Further analytical testing may also be required.
Shreerang Thergaonkar.
10