Beruflich Dokumente
Kultur Dokumente
1/9-10 G4
Etabloc
Close-coupled pumps
Fields of application
Water supply Sprinkling Irrigation Drainage Heating systems Air-conditioning systems Drinking water Service water Hot water Cooling water Swimming pool water Sea water Fire-fighting water Brackish water Condensate Brine Oils Cleaning agents
Drive
Operating data
50 Hz 60 Hz Q up to 650 m3/h, 180 l/s up to 740 m3/h, 205 l/s H up to 101 m up to 97 m t -30 up to +140 C P2 1) up to 16 bar 1) see pressure/temperature limits, page 5 of type series booklet 1167.5-10
Designation
Type series Casing material e.g. JL1040 2) Stub shaft design with standardized motor Pump size, e.g. Motor rating: kW x 10 (e.g. 7.5 kW) Number of motor poles
2) to EN 1561 = GJL-250
Standard version Etabloc N Surface-cooled KSB-IEC three-phase squirrel cage motor. Winding: 50Hz up to 2.2 kW 220-240 V/380-420 V up to 3 kW 380-420 V/660-725 V 60Hz up to 2.6 kW 440-480 V up to 3.6 kW 440-480 V Design: up to 4 kW IM V1 up to 5.5 kW IM V15 Enclosure: IP 55 Thermal class: F with temperature sensors: 3 PTC resistors Operating mode: continuous operation S1 or surface-cooled three-phase squirrel cage motor as described above, but West European brand to KSBs choice. Flameproof version Etabloc N Surface-cooled IEC three-phase squirrel cage motor, West European brand to KSBs choice. Winding: 50Hz up to 1.85 kW 220-240 V/380-420 V ab 2.5 kW 380-420 V/660-725 V Disign: up to 3.3 kW IM V1 for 4.6 kW and above IM V15 Enclosure: IP 55 or IP 54 Type of protection: EExe II Thermal class: T3 Operating mode: continuous operation S1 Standard version Etabloc G, M Surface-cooled KSB three-phase squirrel cage motor with longer shaft and special flange. Winding: 50Hz up to 2.2 kW: 220-240 V / 380-420 V for 3 kW and above: 380-420 V / 660-725 V 60Hz up to 2.6 kW 440-480 V for 3.6 kW and above440-480 V Design: up to 4 kW: ohne Fu for 5.5 kW:and above with foot Enclosure: IP 55 Thermal class: F mit Temperaturfhler: 3 Kaltleiter Operating mode: continuous operation S1 Contact guard: Cover plates on drive lantern to EN 294
Shaft seal
Volute casing pumps, single-stage 3), with ratings to EN 733. The shaft is fitted with a replaceable shaft sleeve in the shaft seal area. Volute casing and impeller supplied with replaceable wear rings 4).
3) Etabloc 32-23 double-stage 4) except Etabloc 25-20 and 32-23
Design/Variants
Etabloc GN, MN, SN, BN, CN Pump and motor flanged together to form a close-coupled unit, with standardized motor.
Etabloc G, M Pump and motor flanged together to form a close-coupled unit, with common shaft.
Certification
Certified quality management ISO 9001.
32 --- 250.1 32 --- 23.1 3) 32 --- 250 2) 40 --- 250 1) 2) 50 --- 250
1) 2)
65 --- 250
1) 2)
300
200
80 --- 200 1) 2)
32 --- 200.1
1) 2)
30 32 --- 160.1
1) 2)
32 --- 160
1) 2)
40 --- 1601) 2)
50 --- 160 1) 2)
65 --- 160
1) 2)
20
32 --- 125 32 --- 125.1 1) 2) 3) 40 --- 125 50 --- 125 65 --- 125
1) 2)
50
40
10 30 ft 20 5 H [m] 4 4 5 Q[m 2
3
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / Tambin disponible en: 1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estao 2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundicin esferoidal Nicht lieferbar in: / Not available in: / Nxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: 3) Chrom---Nickel---Molybdaen---Stahlguss / Cast chrome nickel molybdenum steel / Acier coul au nickel---chrome---molybdne / Acciaio fuso al croma---nickel molibdeno / Chroom---nikkel---molybdeen gietstal / Acero fundido al cromo---niquel molibdeno
/h]
10 3 4 5
20 l/s
30 10
40
50 20
100 30 40 50
200
300
400
450
100 KE1167.4052/8
n = 1450 rpm
10 60 50 40 30 40 --- 315 2) 50 --- 315 2) 20 32 --- 250.1 32 --- 250 2) 40 --- 250 50 --- 250
1) 2) 1) 2)
US.gpm 10
20 20
30 30
40
50 40 50
100 100
200 200
300
1000 1000
2000 2000
3000
IM.gpm
65 --- 315 2)
80 --- 315 2)
65 --- 250
1) 2)
80 --- 250
1) 2)
10
1) 32 --- 200.1 2)
40 --- 200
1) 2)
50 --- 200
65 --- 200
1) 2)
1) 2)
80 --- 200
1) 2)
25 --- 20.1
3)
32 --- 200 2) 1)
1) 32 --- 160.1 2)
1) 2)
50 --- 160
1) 2)
65 --- 160
1) 2)
80 --- 160
1) 2)
5 4 3
1) 32 --- 125.1 2) 3)
40 --- 125
32 --- 125
2 H [m]
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / Tambin disponible en: 1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estao 2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundicin esferoidal Nicht lieferbar in: / Not available in: / Nxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: 3) Chrom---Nickel---Molybdaen---Stahlguss / Cast chrome nickel molybdenum steel / Acier coul au nickel---chrome---molybdne / Acciaio fuso al croma---nickel molibdeno / Chroom---nikkel---molybdeen gietstal / Acero fundido al cromo---niquel molibdeno
1 0.8
3 1
5 l/s
Q[m 2
/h] 10 3 4 5
20
30 10
40
50 20
100 30 40 50
200
300
40 --- 200
1) 2)
50 --- 200
1) 2)
300
200
40 --- 160
1) 2)
50 --- 160
1) 2)
65 --- 160
1) 2)
1) 2)
100
40 --- 125
20
H [m]
50
40 ft 10
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / Tambin disponible en: 1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estao 2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundicin esferoidal Nicht lieferbar in: / Not available in: / Nxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: 3) Chrom---Nickel---Molybdaen---Stahlguss / Cast chrome nickel molybdenum steel / Acier coul au nickel---chrome---molybdne / Acciaio fuso al croma---nickel molibdeno / Chroom---nikkel---molybdeen gietstal / Acero fundido al cromo---niquel molibdeno
30
6 2
10 3 4 5
20 l/s
30 10
40
50
Q[m 20
/h]
100 30 40 50
200
300
350
KE1167.4062/8
n = 1750 rpm
20 70 20 30 30 40 50 40 50 US.gpm 100 100 200 200 300 400 300 500 400 500 1000 1000 2000 2000 3000 IM.gpm
65 --- 315 2)
200
40 --- 250 2) 1)
50 --- 250
1) 2)
65 --- 250
1) 2)
80 --- 250
1) 2)
50 --- 200
65 --- 200
1) 2)
1) 2)
50 40
10
50 --- 160 1) 2)
65 --- 160
1) 2)
80 --- 160 1) 2)
32 --- 125.1 1) 2) 3) 5 4
32 --- 125
40 --- 125
20
3 H [m] 2
10
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / Tambin disponible en: 1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estao 2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundicin esferoidal Nicht lieferbar in: / Not available in: / Nxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: 3) Chrom---Nickel---Molybdaen---Stahlguss / Cast chrome nickel molybdenum steel / Acier coul au nickel---chrome---molybdne / Acciaio fuso al croma---nickel molibdeno / Chroom---nikkel---molybdeen gietstal / Acero fundido al cromo---niquel molibdeno
ft
1.5
5 3 1 4 5 l/s Q[m 2
3
/h] 10 3 4 5
20
30 10
40
50 20
100 30 40 50
200
300
400 100
800
Etabloc Materials
Etabloc G, GN Volute casing Discharge cover Impeller Casing wear rings Shaft Shaft sleeve Drive lantern Grey cast iron JL1040 Grey cast iron JL1040 1) Grey cast iron JL1040 1) Grey cast iron GG Tempering steel C45N Chrome nickel molybdenum steel 1.4571 Grey cast iron JL1040 1) Etabloc SN Volute casing Discharge cover Impeller Casing wear rings Shaft Shaft sleeve Drive lantern
1) to EN 1561 = GJL-250 2) to EN 1563 = GJS-400-18-LT 3) to EN 1982
Etabloc M, MN
1)
Etabloc BN
1)
Grey cast iron JL1040 Grey cast iron JL1040 1) Tin bronze CC480K-GS 3) Grey cast iron / Leaded bronze GG/CC495K-GS 3) Tempering steel C45N Chrome nickel molybdenum steel 1.4571 Grey cast iron JL1040 1) Etabloc CN
Tin bronze CC480K-GS 3) Tin bronze CC480K-GS 3) Tin bronze CC480K-GS 3) Leaded bronze CC495K-GS 3) Chrome nickel molybdenum steel 1.4571 Chrome nickel molybdenum steel 1.4571 Grey cast iron JL1040 1)
Nodular cast iron JS1025 2) Nodular cast iron JS1025 Grey cast iron JL1040 1) Grey cast iron GG Tempering steel C45N Chrome nickel molybdenum steel 1.4571 Grey cast iron JL1040 1)
2)
Cast chrome nickel molybdenum steel 1.4408 Cast chrome nickel molybdenum steel 1.4408 Cast chrome nickel molybdenum steel 1.4408 Cast chrome nickel molybdenum steel 1.4408 Chrome nickel molybdenum steel 1.4571 Chrome nickel molybdenum steel 1.4571 Grey cast iron JL1040 1)
Etabloc N
Large material selection Grey cast iron, tin bronze, nodular cast iron, cast chrome nickel molybdenum steel Shaft sleeve prevents wear on the shaft Service-friendly, sturdy KSB IEC three-phase motor
Suction geometry designed for max. suction capacity (NPSH) and optimal cavitation behaviour
KSB Aktiengesellschaft 67225 Frankenthal Johann-Klein-Str. 9 67227 Frankenthal (Germany) Tel. +49 6233 86-0 Fax +49 6233 86-3401 www.ksb.com
1167.1/9-10
15.01.2006