Beruflich Dokumente
Kultur Dokumente
Thats E[M]CONOMY:
[ Work area ]
- Unobstructed chip fall - Best ergonomics - Human protection from chips and coolant - Large safety-glass door
[ Tool turret ]
- 12 positions VDI16 axial - With 6 driven tools for milling operations - Internal coolant supply - Synchronized thread cutting
[ Main spindle ]
High performance Thermostable construction Large speed range Bar clearance dia. 25 mm (1) Through-hole clamping cylinder
[ Control unit ]
- Modern digital AC control technology - Color LCD flat screen - MOC: integrated PC - WinNC concept: all established NC control units on one machine
[ Guideways ]
- In the X and Z axes - Free of play - Non-wearing - High speed
[ Machine base ]
Small footprint Easy to transport Large coolant reservoir Easy to clean
[ Workpieces ]
Ring (Gold)
[ Engineering ]
Highlights
Extremely solid machine base,
Options
Bar loader Chip conveyor 3-jaw chuck dia. 95 mm (3.7) Collet chuck 385 E Automatic door Integration into FMS and CIM systems using DNC and
top thermostability Highest precision Compact construction USB and ethernet interface integrated Servo-motor technology in all axes Made in the Heart of Europe
robotic interface Attractive tool packages for the TC and TCM versions
Performance
Working spindle performance and torque diagram
M [Nm]
40 M (S6-40%ED) 35 30 25 20 15 10 5 0
1500
P [kW]
8 7 P (S6-40%ED) 6 5 4 3 2 1 0 500 1000 2000 3000 4000 5000 6000
6300
n [rpm]
The conversion to another control system is carried out within a minute by calling up the respective software and by simply replacing the controller specific keyboard module
Work area
max. 16 (0.63) 300 (11.8) 256 (10.1) max. M8 max.61 (2.4) 44 (1.7)
329 (13) 256 (10.1) max.29,5 (1.16) 7 (0.3) 22,5 (0.9) 20 (0.8) 61,5 (2.4)
25,5 (1)
M6
85 (3.35) 2 (0.1)
66 (2.6)
25,5 (1)
95 (3.7)
12 (0.47)
29 (1.1)
Machine layout
1420 (55.9)
1200 (47.2)
1812 (71.34)
100 (3.94)
LM 800
1323 (52.1)
1123 (44.2)
1025 (40.35)
1522 (59.9)
1266 (49.8)
1130 (44.5)
1812 (71.34)
[ Technical data ]
CONCEPT TURN 250
Work area Swing over bed Swing over cross slide Maximum distance between centers Maximum turning diameter Maximum turning length TC / TCM Maximum bar-stock diameter Travel Travel in X Travel in Z Main spindle Speed range Spindle torque Spindle nose Spindle bearing (inner diameter at front) Spindle bore C axis Resolution Rapid motion speed Main motor Drive performance Tool turret Number of tool positions Tool holding shaft in accordance with VDI (DIN 69880) Tool cross-section for square tools Shank diameter for boring bars Turret indexing time Driven tools Number of stations Drive performance Maximum torque Speed range Feed drives Rapid motion speed X/Z Feed force in the X/Z axis 250 mm (9.8) 85 mm (3.35) 405 mm (15.9) 85 mm (3.35) 270 / 256 mm (10.6 / 10.1) 25.5 mm (1) 100 mm (3.94) 300 mm (11.8) 60 6300 rpm 35 Nm (25.8 ft/lbs) 70 h5 50 mm (2) 30 mm (1.2) 0.01 1000 rpm 5.5 kW (7.4 hp) 12 16 12 x 12 mm (0.47 x 0.47) 16 mm (0.63) 1.0 sec 0 resp. 6 1.2 kW (1.6 hp) 4 Nm (2.95 ft/lbs) 200 6000 rpm 15/15 m/min (590.6/590.6 ipm) 3000/3000 N (674.4/786.8 lbs) Feed drives Time from 0 to rapid motion Position variation Ps (in accordance with VDI 3441) in X/Z Tailstock Quill stroke Quill diameter (live center integrated) Quill thrust Coolant system Tank volume Pump performance Dimensions Height of spindle center Machine height Required space for machine L x D Total weight 0.1 sec 0.004/0.004 mm (0.0002/0.0002) 120 mm (4.7) 35 mm (1.4) 800 2500 N (179.8 562 lbs) 140 Liter (37.03 gal) 0.57 kW (0.76 hp) 1131 mm (44.5) 1820 mm (71.65) 1700 x 1270 mm (66.9 x 50) 1100 kg (2425.06 lb)
EN4552 . 08/11 Subject to change due to technical progress. Errors and omissions excepted.
EMCO LM800
Bar length Bar diameter Material storage Length Width Weight 100 600 mm (3.9 23.6) 6 25 mm (2.6 1) 23 bars of 25 mm (1) 1200 mm (47.4) 1150 mm (43.3) approx. 190 kg (418.9 lb)
www.emco-world.com
EMCO MAIER Ges.m.b.H. Salzburger Str. 80 . 5400 Hallein-Taxach . Austria Phone +43 6245 891-0 . Fax +43 6245 86965 . info@emco.at