Beruflich Dokumente
Kultur Dokumente
Technical Data
Divinycell F is a recyclable, prepreg compatible sandwich core offering excellent FST (fire, smoke and toxicity) properties, good mechanicals and processing characteristics. Divinycell F has been specifically developed for commercial aircraft interior applications. It more than exceeds the US and European regulatory requirements for commercial aircraft interiors. Other key features include 220C (425F) processing temperature, superior damage tolerance, exceptional fatigue life, low water absorption, good chemical resistance, excellent hot/wet properties and excellent heat ageing at 180C (356F). Divinycell F is compatible with most common composite manufacturing processes. In addition Divinycell F is both hot and cold formable. For optimal design of applications used in high operating temperatures in combination with continuous load, please contact DIAB Technical Services for detailed design instructions.
Unit kg/m3 lb/ft psi MPa psi MPa psi MPa psi MPa psi kg/m2 %v % 9.375 GHz 9.375 GHz
3
F 50 50 3.1 0.5 73 30 4,350 1.7 247 0.6 87 7.5 1,090 0.003 2 70 1.10 0.0018
F 90 90 5.6 0.7 102 40 5,800 2.15 312 1.1 160 9.5 1,380 0.002 1.8 65 TBD TBD
F 130 130 8.1 1.0 145 50 7,250 2.7 392 1.6 232 11.5 1,670 0.002 1.6 60 TBD TBD
MPa
page 1 of 2 This data sheet may be subject to revision and changes due to development and changes of the material. The data is derived from tests and experience. The data is average data and should be treated as such. Calculations should be verified by actual tests. The data is furnished without liability for the company and does not constitute a warranty or representation in respect of the material or its use. The company reserves the right to release new data sheets in replacement.
All content in this publication is protected by International Copyright Laws. Copyright DIAB August 2010
F-ds.08_2010.rev12
www.diabgroup.com
EF
Quality Aviation
OSU Heat Release Smoke Toxicity Vertical Burn Spread of Flame Heat Release Rate Optical Density Smoke Density Toxicity
Technical Data
F 50
<10/10 <1/1 Pass Pass
Test Method
F 90
<10/10 <1/1 Pass Pass CHF=48 kW/m VOF4 = 50 Ds(4) = 41 CIT at 8 mins = 0,59 CIT at 4 mins = 0,21 M1 F1 F1 S4 SR2 ST2
2
F 130
<10/10 <1/1 Pass Pass TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD
Regulation
<65/65 <55/55 <100/200 * <6/SE/N/D >37,8 passed HL4 <60 passed HL4 <300 passed HL4 <150 passed HL4 <0.75 passed HL4
Rail
* Maximum processing temperature is dependent on time, pressure and processing conditions. Therefore users are advised to contact DIAB Technical Services to confirm that Divinycell F is compatible with their particular processing parameters.
page 2 of 2
www.diabgroup.com
The Americas Tel +1 (972) 228-7600 Fax +1 (972) 228-2667 Em: info@us.diabgroup.com
Europe Tel +46 (0)430 163 00 Fax +46 (0)430 163 95 Em: info@se.diabgroup.com
Asia - Pacific Tel +86 (0)512 5763 0666 Fax +86 (0)512 5763 0999 Em: info@cn.diabgroup.com
F-ds.08_2010.rev12
All content in this publication is protected by International Copyright Laws. Copyright DIAB August 2010