Beruflich Dokumente
Kultur Dokumente
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
1. EXECUTIVE SUMMARY..........................................................................3 2. TECHNICAL SPECIFICATION ................................................................4 2.1 GENERAL DESCRIPTION...............................................................4 2.2 REFERENCE STANDARS...............................................................4 2.3 PANEL SUMMARY...........................................................................5 2.4 BILL OF MATERIAL..........................................................................7 3. COMPLIANCE RESPONSE TECHNICAL..........................................33
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
1. EXECUTIVE SUMMARY After reviewing AMEC Per specification, ABB is flexible in adjusting any technical detail offered with this tender in order to the customers requirements. We propose to supply a complete Unit Substations Electrical covering its design, manufacture, testing and supply. For information in commercial issues, please refer to commercial offer.
UNIT SUBSTATION
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
This specification covers the technical requirements for the design, construction and testing of Unit Substations that combine incoming Medium Voltage section, 3-phase Power Transformer, and secondary Medium Voltage equipment or Low Voltage equipment. Unit Substations will be installed at Chucapaca project, located at 5000 m.a.s.l. The ambient design temperature is according to the Site Data and Project Requirements 169249-0000-131-SPC-0001. Unit Substations will be suitable for outdoor installation, as specified on the Data Sheet. Futhermore: 23 kV Metal Enclosed load interrupter switchgear with fuses: Metal enclosed load interrupter switchgear with fuses shall be utilized for transformers from 500 KVA to 3750 KVA. 23 kV Metal Enclosed Breaker: Circuit breaker will be SF6 type, fixed mounted, electrically operated, stored energy operation type. Breaker ratings and operating voltages shall be as shown on the Data Sheet. The breaker shall be complete with closing and tripping mechanisms, auxiliary switches, holding coils, relays, mechanical position indicators (closed-open), operation counters and accessories.
2.2
REFERENCE STANDARS
The design, fabrication / field erection (where applicable), inspection and testing of the equipment shall comply with the latest edition (including addenda) of applicable codes / standards issued by the following organizations: ANSI IEEE NEMA NFPA UL American National Standards Institute. Institute of Electrical and Electronic Engineers. National Electrical Manufacturers Association. National Fire Protection Association. Underwriters Laboratories, Inc.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
Occupational Safety and Health Administration. American Society of Mechanical Engineers. American Iron and Steel Institute. American Welding Society.
2.3
PANEL SUMMARY Item Description UNIT SUBSTATION 23/0.48 kV, 250 kVA for Truck Shop. MV FUSED SWITCH, 23 kV, 600 A, 25E. TRANSFORMER 250 kVA, 23/0.48kV Tags Qty
1220-US-001
UNIT SUBSTATION 23/4.16 kV, 3.75 MVA for Crushing MV FUSED SWITCH, 23 kV, 600 A, 150E TRANSFORMER 3 MVA, 23/0.48kV.
3100-US-001
UNIT SUBSTATION 23/4.16 kV, 10 MVA for Flotation and Regrinding. MV SWITCHGEAR 23 kV, BREAKER 1200A TRANSFORMER 10 MVA, 23 / 4.16 kV.
3400-US-001
UNIT SUBSTATION 23/4.16 kV, 7.5 MVA for CIL Process Area MV SWITCHGEAR 23 kV, BREAKER 1200A TRANSFORMER 7.5 MVA, 23 / 4.16 kV
3500-US-001
UNIT SUBSTATION 23/4.16 kV, 3.75 MVA for Acid Wash-Elution Area MV FUSED SWITCH, 23 kV, 600 A, 150E TRANSFORMER 3.75 MVA, 23 / 4.16 kV
3600-US-001
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
3900-US-001
UNIT SUBSTATION 232/0.48 kV, 500 kVA for Reagent Storage MV FUSED SWITCH, 23 kV, 600 A, 25E. TRANSFORMER 500 kVA, 23/0.40 - 0.23kV.
UNIT SUBSTATION 23/0.4 0.231 kV, 500 kVA for Camp and Accomodation. MV FUSED SWITCH, 23 kV, 600 A, 25E TRANSFORMER 500 kVA, 23/0.40 - 0.23kV
5100-US-001
UNIT SUBSTATION 23/0.4 0.231 kV, 250 kVA for Plant Area. MV FUSED SWITCH, 23 kV, 600 A, 25E. TRANSFORMER 250 kVA, 23/0.40 - 0.23kV
5200-US-001
UNIT SUBSTATION 23/0.4 0.231 kV, 2 MVA for for Water Supply Station. MV FUSED SWITCH, 23 kV, 600 A, 450E TRANSFORMER 2 MVA, 23 / 4.16 kV
7200-US-001
10
UNIT SUBSTATION 23/0.4 0.231 kV, 2 MVA for for Water Supply Station. MV FUSED SWITCH, 23 kV, 600 A, 450E TRANSFORMER 2 MVA, 23 / 4.16 kV. UNIT SUBSTATION 23/0.4 0.231 kV, 2 MVA for for Water Supply Station MV FUSED SWITCH, 23 kV, 600 A, 450E. TRANSFORMER 2 MVA, 23 / 4.16 kV
7200-US-002
11
7200-US-003
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
2.4 2.4.1
BILL OF MATERIAL UNIT SUBSTATION 23/0.48 kV, 250 kVA for Truck Shop Approximate dimensions of Unit Substation: 6506x6400x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Equipped with: Switchgear: 23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 600 A, 25E. The switch is contained in an enclosed metal, free-standing enclosure. The switch handle is operable from the front, and the access door shall be mechanically interlocked so that the door can not be opened unless the switch is in the open position. The switch mechanism is of the stored energy type not dependent upon incremental motion of the operating handles. The switch compartment have a visible isolation viewing window. Switch enclosure is NEMA 4, flange mounted to transformer.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 630 A, 40 kA, 25E. Local manufacturing, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions:
Qty.: 01
24 kV 1250 A 50 kV
23 kV 40 kA (1s) 125 kV
Nema 4
RAL7035
equipment Included: 1 Set of shunt bars electrolytic copper of 630A 1 Set of lightning, size 2, ABB or similar mark 1 Disconnector NALF 40.5 KV with 03 fuse 1 Set of with 03 fuse 25E Set of materials minor and mini-switches, terminal blocks, signs, 1 etc 1 Nema 4 metal enclosure
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
Transf
The minimum following accessories is provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
2.4.2
UNIT SUBSTATION 23/4.16 kV, 3.75 MVA for Crushing Approximate dimensions of Substation: 6506x6400x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Equipped with: Switchgear: 23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 600 A, 150E. The switch is contained in an enclosed metal, free-standing enclosure. The switch handle is operable from the front, and the access door shall be mechanically interlocked so that the door can not be opened unless the switch is in the open position. The switch mechanism is of the stored energy type not dependent upon incremental motion of the operating handles. The switch compartment have a visible isolation viewing window. Switch enclosure is NEMA 4, flange mounted to transformer.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 630 A, 40 kA, 150E. Local manufacturing, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions: 24 kV 1250 A 50 kV
Qty.: 01
Service Voltage: 23 kV Short circuit current: 40 kA (1s) Test voltage 125 kV impulse:
Nema 4
RAL7035
equipment Included: 1 Set of shunt bars electrolytic copper of 630A 1 Set of lightning, size 2, ABB or similar mark 1 Disconnector NALF 40.5 KV with 03 fuse 1 Set of with 03 fuse 150E Set of materials minor and mini-switches, terminal blocks, signs, 1 etc 1 Nema 4 metal enclosure
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
TRANSFORMER 3.75 MVA, 23/ 4.16kV The minimum following accessories is provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
NEUTRAL GROUNDING RESISTOR, 2400 VOLTS L/N, 100 AMPERES, 10 SECONDS DUTY C/W 600 VOLTS CT RATIO 50:5 10P10 2.5 VA IN EXTERIOR ENCLOSURE NEMA 4, NAMEPLATE AND IPPC EXPORT SKID. FOR OPERATION AT 5000 M.A.S.L. Product Type Item Type Element Material coefficient Coef. Resistivity Voltage Current : Resistance to neutral ground : I-Gard Edge Wound Resitor : Stainless steel electrical grade low temperature : 0.0002 Ohms / C : 2400 Volts L / N in the resistance : 100 Amps
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
Operation : 10 seconds Resistance : 24 Ohms + / - 10% Cabinet : Exterior NEMA 4 (without ventilation) Finish : Standard, ANSI Gray 61 (Powder coat 2mil) Estimated Dimensions : 32 "x 48" x 48 "tall Dear Weight : 600 lbs For operation at 5000 m.s.n.m. Seismic Zone 3 other: Current Transformer 600 volts, ratio 50: 5 10P10 2.5 VA Removable side covers Stainless steel screws
2.4.3
UNIT SUBSTATION 23/4.16 kV, 10 MVA for Flotation and Regrinding Approximate dimensions of rooms: 11624x10485x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Equipped with: Switchgear: 23 kV Metal Enclosed Breaker: MV SWITCHGEAR 23 kV, BREAKER 1200A ,Breaker enclosure is NEMA 4 or as indicated on Data Sheets, flanged mounted to transformer. Circuit breaker is three-pole vacuum or SF6, fixed mounted, electrically operated, stored energy operation type. Breaker ratings and operating voltages is as shown on the Data Sheet. The breaker shall be complete with closing and tripping mechanisms, auxiliary switches, holding coils, relays, mechanical position indicators (closed-open) operation counters and accessories. Circuit Breakers is continuous and interrupting current ratings according to the drawings and Data Sheet. Breakers have padlock type lockout provision. Breakers is provided with a local trip-close control switch as specified on the drawings and Data sheet, with green and red pilot lights to indicate breaker trip-close positions on the front of unit panel. Provision in control wire terminations and scheme shall be made for breaker remote close-trip functions and monitoring lights.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
23 kV Metal Enclosed Breaker: MV SWITCHGEAR 23 kV, BREAKER 1200A, 40 kA, Model ZX2, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions: equipment Included: 1 1 1 1
Qty.: 01
24 kV 1250 A 50 kV
23 kV 40 kA (1s) 125 kV
IP4X
RAL7035
1 1 1 1 -
Set of electrolytic copper bus bars of 1250A Set of shunt bars electrolytic copper of 630A Set of lightning Polim D, size 2, ABB or similar mark. Voltage presence indicator on the front and rear Disconnector three-position motorized 125VDC. Includes contact position. ABB vacuum interrupter VD4X, fixed, 24kV, 1250A, 40kA, including: Moto operator for spring load at 125VDC, opening and closing coils 125VDC second opening coil, magnetic lock, counter operations, auxiliary contacts. It has locking mechanism between the switch and three-position. Current Transformers 1250/1, Cl 5P20, 5VA . Digital multifunction relay over current RET543 ABB, with protection 50/51, 50N/51N, 27/59, 67/67N, 46, 86, 74TC, 50BF, measuring 87T A, V, kW, kVA, kvar, kWh, PF, with IEC 61850 communication protocol, serial port RS485, RS232, 2 optical and 2 RJ45. System of Heating and lighting. Set of materials minor and mini-switches, terminal blocks, signs, etc
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
TRANSFORMER 10 MVA, 23 / 4.16 kV. The minimum following accessories shall be provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
NEUTRAL GROUNDING RESISTOR, 2400 VOLTS L/N, 100 AMPERES, 10 SECONDS DUTY C/W 600 VOLTS CT RATIO 50:5 10P10 2.5 VA IN EXTERIOR ENCLOSURE NEMA 4, NAMEPLATE AND IPPC EXPORT SKID. FOR OPERATION AT 5000 M.A.S.L. Product Type : Resistance to neutral ground Item Type : I-Gard Edge Wound Resitor Element Material : Stainless steel electrical grade low temperature coefficient Coef. Resistivity : 0.0002 Ohms / C Voltage : 2400 Volts L / N in the resistance Current : 100 Amps Operation : 10 seconds Resistance : 24 Ohms + / - 10% Cabinet : Exterior NEMA 4 (without ventilation) Finish : Standard, ANSI Gray 61 (Powder coat 2mil) Estimated Dimensions : 32 "x 48" x 48 "tall Dear Weight : 600 lbs For operation at 5000 m.s.n.m. Seismic Zone 3 other: Current Transformer 600 volts, ratio 50: 5 10P10 2.5 VA Removable side covers Stainless steel screws
2.4.4
UNIT SUBSTATION 23/4.16 kV, 7.5 MVA for CIL Process Area. Approximate dimensions of rooms: 10200x9385x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Equipped with: Switchgear: 23 kV Metal Enclosed Breaker: MV SWITCHGEAR 23 kV, BREAKER 1200A, Breaker enclosure is NEMA 4 or as indicated on Data Sheets, flanged mounted to transformer. Circuit breaker is three-pole vacuum or SF6, fixed mounted, electrically operated, stored energy operation type. Breaker ratings and operating voltages is as shown on the Data Sheet. The breaker shall be complete with closing and
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
tripping mechanisms, auxiliary switches, holding coils, relays, mechanical position indicators (closed-open) operation counters and accessories. Circuit Breakers is continuous and interrupting current ratings according to the drawings and Data Sheet. Breakers have padlock type lockout provision. Breakers is provided with a local trip-close control switch as specified on the drawings and Data sheet, with green and red pilot lights to indicate breaker trip-close positions on the front of unit panel. Provision in control wire terminations and scheme shall be made for breaker remot close-trip functions and monitoring lights. .
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
23 kV Metal Enclosed Breaker: MV SWITCHGEAR 23 kV, BREAKER 1200A, 40 kA, Model ZX2, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions:
Qty.: 01
24 kV 1250 A 50 kV
23 kV 40 kA (1s) 125 kV
IP4X
RAL7035
equipment Included: 1 Set of electrolytic copper bus bars of 1250A 1 Set of shunt bars electrolytic copper of 630A 1 Set of lightning Polim D, size 2, ABB or similar mark. 1 Voltage presence indicator on the front and rear Disconnector three-position motorized 125VDC. Includes 1 contact position. ABB vacuum interrupter VD4X, fixed, 24kV, 1250A, 40kA, including: Moto operator for spring load at 125VDC, opening and closing coils 125VDC second opening coil, magnetic lock, counter operations, auxiliary contacts. It has locking mechanism between the switch and three-position. Current Transformers 1250/1, Cl 5P20, 5VA . Digital multifunction relay over current RET543 ABB, with protection 50/51, 50N/51N, 27/59, 67/67N, 46, 86, 74TC, 50BF, measuring 87T A, V, kW, kVA, kvar, kWh, PF, with IEC 61850 communication protocol, serial port RS485, RS232, 2 optical and 2 RJ45. System of Heating and lighting. Set of materials minor and mini-switches, terminal blocks, signs, etc
1 1 1 -
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
TRANSFORMER 7.5 MVA, 23 / 4.16 kV. The minimum following accessories shall be provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
NEUTRAL GROUNDING RESISTOR, 2400 VOLTS L/N, 100 AMPERES, 10 SECONDS DUTY C/W 600 VOLTS CT RATIO 50:5 10P10 2.5 VA IN EXTERIOR ENCLOSURE NEMA 4, NAMEPLATE AND IPPC EXPORT SKID. FOR OPERATION AT 5000 M.A.S.L. Product Type : Resistance to neutral ground Item Type : I-Gard Edge Wound Resitor Element Material : Stainless steel electrical grade low temperature coefficient Coef. Resistivity : 0.0002 Ohms / C Voltage : 2400 Volts L / N in the resistance Current : 100 Amps Operation : 10 seconds Resistance : 24 Ohms + / - 10% Cabinet : Exterior NEMA 4 (without ventilation) Finish : Standard, ANSI Gray 61 (Powder coat 2mil) Estimated Dimensions : 32 "x 48" x 48 "tall Dear Weight : 600 lbs For operation at 5000 m.s.n.m. Seismic Zone 3 other: Current Transformer 600 volts, ratio 50: 5 10P10 2.5 VA Removable side covers Stainless steel screws
2.4.5
UNIT SUBSTATION 23/4.16 kV, 3.75 MVA for Acid Wash-Elution Area Approximate dimensions of rooms: 10200x9785x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Equipped with: Switchgear: 23 kV Metal Enclosed load interrupter switchgear with fuses.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
MV FUSED SWITCH, 23 kV, 600 A, 150E, The switch is contained in an enclosed metal, free-standing enclosure. The switch handle is operable from the front, and the access door shall be mechanically interlocked so that the door can not be opened unless the switch is in the open position. The switch mechanism is of the stored energy type not dependent upon incremental motion of the operating handles. The switch compartment have a visible isolation viewing window. Switch enclosure is NEMA 4, flange mounted to transformer.
23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 630 A, 40 kA, 150E. Local manufacturing, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions:
Qty.: 01
24 kV 1250 A 50 kV
23 kV 40 kA (1s) 125 kV
Nema 4
RAL7035
equipment Included: 1 Set of shunt bars electrolytic copper of 630A 1 Set of lightning, size 2, ABB or similar mark 1 Disconnector NALF 40.5 KV with 03 fuse 1 Set of with 03 fuse 150E Set of materials minor and mini-switches, terminal blocks, 1 signs, etc 1 Nema 4 metal enclosure
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
Transformer secti
TRANSFORMER 3.75 MVA, 23 / 4.16 kV The minimum following accessories is provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
NEUTRAL GROUNDING RESISTOR, 2400 VOLTS L/N, 100 AMPERES, 10 SECONDS DUTY C/W 600 VOLTS CT RATIO 50:5 10P10 2.5 VA IN EXTERIOR ENCLOSURE NEMA 4, NAMEPLATE AND IPPC EXPORT SKID. FOR OPERATION AT 5000 M.A.S.L. Product Type Item Type Element Material coefficient Coef. Resistivity : Resistance to neutral ground : I-Gard Edge Wound Resitor : Stainless steel electrical grade low temperature : 0.0002 Ohms / C
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
Voltage : 2400 Volts L / N in the resistance Current : 100 Amps Operation : 10 seconds Resistance : 24 Ohms + / - 10% Cabinet : Exterior NEMA 4 (without ventilation) Finish : Standard, ANSI Gray 61 (Powder coat 2mil) Estimated Dimensions : 32 "x 48" x 48 "tall Dear Weight : 600 lbs For operation at 5000 m.s.n.m. Seismic Zone 3 other: Current Transformer 600 volts, ratio 50: 5 10P10 2.5 VA Removable side covers Stainless steel screws
2.4.6
UNIT SUBSTATION 232/0.48 kV, 500 kVA for Reagent Approximate dimensions of rooms: 10500x8400x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Equipped with: Switchgear: 23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 600 A, 25E The switch is contained in an enclosed metal, free-standing enclosure. The switch handle is operable from the front, and the access door shall be mechanically interlocked so that the door can not be opened unless the switch is in the open position. The switch mechanism is of the stored energy type not dependent upon incremental motion of the operating handles. The switch compartment have a visible isolation viewing window. Switch enclosure is NEMA 4, flange mounted to transformer.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 630 A, 40 kA, 25E. Local manufacturing, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions: 24 kV 1250 A 50 kV
Qty.: 01
Service Voltage: 23 kV Short circuit current: 40 kA (1s) Test voltage impulse: 125 kV
Nema 4
RAL7035
equipment Included: 1 Set of shunt bars electrolytic copper of 630A 1 Set of lightning, size 2, ABB or similar mark 1 Disconnector NALF 40.5 KV with 03 fuse 1 Set of with 03 fuse 25E 1 Set of materials minor and mini-switches, terminal blocks, signs, etc 1 Nema 4 metal enclosure
Transformer sect TRANSFORMER 500 kVA, 23/0.40 - 0.23kV The minimum following accessories is provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
2.4.7
UNIT SUBSTATION 23/0.4 0.231 kV, 500 kVA for Camp and Accomodation. Approximate dimensions of rooms:
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
8700x6000x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Equipped with: Switchgear: 23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 600 A, 25E The switch is contained in an enclosed metal, free-standing enclosure. The switch handle is operable from the front, and the access door shall be mechanically interlocked so that the door can not be opened unless the switch is in the open position. The switch mechanism is of the stored energy type not dependent upon incremental motion of the operating handles. The switch compartment have a visible isolation viewing window. Switch enclosure is NEMA 4, flange mounted to transformer.
23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 630 A, 40 kA, 25E. Local manufacturing, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions: 24 kV 1250 A 50 kV
Qty.: 01
Service Voltage: 23 kV Short circuit current: 40 kA (1s) Test voltage impulse: 125 kV
Nema 4
RAL7035
equipment Included: 1 Set of shunt bars electrolytic copper of 630A 1 Set of lightning, size 2, ABB or similar mark 1 Disconnector NALF 40.5 KV with 03 fuse 1 Set of with 03 fuse 25E Set of materials minor and mini-switches, terminal blocks, signs, 1 etc 1 Nema 4 metal enclosure
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
Transformer section
TRANSFORMER 500 kVA, 23/0.40 - 0.23kV The minimum following accessories is provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
2.4.8
UNIT SUBSTATION 23/0.4 0.231 kV, 250 kVA for Plant Area. Approximate dimensions of rooms: 8700x6000x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Equipped with: Switchgear: 23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 600 A, 25E The switch is contained in an enclosed metal, free-standing enclosure. The switch handle is operable from the front, and the access door shall be mechanically interlocked so that the door can not be opened unless the switch is in the open position. The switch mechanism is of the stored energy type not dependent upon incremental motion of the operating handles. The switch compartment have a visible isolation viewing window. Switch enclosure is NEMA 4, flange mounted to transformer.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 630 A, 40 kA, 25E. Local manufacturing, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions:
Qty.: 01
24 kV 1250 A 50 kV
Service Voltage: 23 kV Short circuit current: 40 kA (1s) Test voltage impulse: 125 kV
Nema 4
RAL7035
equipment Included: 1 Set of shunt bars electrolytic copper of 630A 1 Set of lightning, size 2, ABB or similar mark 1 Disconnector NALF 40.5 KV with 03 fuse 1 Set of with 03 fuse 25E Set of materials minor and mini-switches, terminal blocks, signs, 1 etc 1 Nema 4 metal enclosure
Transformer se
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
The minimum following accessories is provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
2.4.9
UNIT SUBSTATION 23/0.4 0.231 kV, 2 MVA for Water Supply Station. Approximate dimensions of rooms: 9400x8200x5000mm, The specific requirements for each Unit Substation shall be indicated on the individual. Valid for Substations 1/ 2/ 3 , equipped with: Switchgear: 23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 600 A, 450E. The switch is contained in an enclosed metal, free-standing enclosure. The switch handle is operable from the front, and the access door shall be mechanically interlocked so that the door can not be opened unless the switch is in the open position. The switch mechanism is of the stored energy type not dependent upon incremental motion of the operating handles. The switch compartment have a visible isolation viewing window. Switch enclosure is NEMA 4, flange mounted to transformer.
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
23 kV Metal Enclosed load interrupter switchgear with fuses. MV FUSED SWITCH, 23 kV, 630 A, 40 kA, 450E. Local manufacturing, ABB brand Unit Electrical Characteristics: Nominal voltage: Rated main busbar: Test Voltage (60 Hz/1 min.): Mechanical characteristics of the Unit: Degree of Protection: Exterior Dimensions: 24 kV 1250 A 50 kV
Qty.: 01
Service Voltage: 23 kV Short circuit current: 40 kA (1s) Test voltage impulse: 125 kV
Nema 4
RAL7035
equipment Included: 1 Set of shunt bars electrolytic copper of 630A 1 Set of lightning, size 2, ABB or similar mark 1 Disconnector NALF 40.5 KV with 03 fuse 1 Set of with 03 fuse 450E 1 Set of materials minor and mini-switches, terminal blocks, signs, etc 1 Nema 4 metal enclosure
Transformer section:
TRANSFORMER 2 MVA, 23 / 4.16 kV. The minimum following accessories is provided with the equipment: Magnetic liquid level gauge with alarm contacts Oil dial type thermometer with trip and alarm contacts Winding thermometer with alarm contacts Pressure vacuum gauge with trip and alarm contacts Pressure test connection
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354
Filling plug and filter press connection Combination drain valve and bottom filter press connection Sampling device Nameplate, including wiring diagram Manhole or handhole in cover Provision for lifting and jacking.
our hands, we reserve the right to adjust our prices resp. technical design accordingly. Not included in our offer all equipment not expressly described (excluding those accessories and devices are essential for a good performance of the distribution panels).
Customer: AMEC Project: Chucapaca Project Your Ref: 169249-0000-141-RFP-0001 Our Ref:840354