Beruflich Dokumente
Kultur Dokumente
A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close or reload any Exam windows during the exam. 2. Do not close Packet Tracer when you are done. It will close automatically. 3. Click the Submit Assessment button to submit your work.
Introduction
In this Packet Tracer Practice Skills-based Assessment, you will: complete the configuration of a partially configured network establish connectivity to the West Region and the Internet through the use of static and dynamic routing verify connectivity
Addressing Table
Device Interface S0/0/0 S0/0/1 EastHQ S0/1/0 S0/1/1 Fa0/0 Fa0/1 E-Branch1 S0/0/0 S0/0/1 Fa0/0 Fa0/1 E-Branch2 S0/0/0 S0/0/1 EPC1 EPC2 EPC3 EPC4 NetAdmin NIC NIC NIC NIC NIC 192.168.1.254 192.168.1.246 192.168.0.2 192.168.0.254 192.168.1.2 192.168.1.126 192.168.1.66 255.255.255.252 255.255.255.252 255.255.255.128 255.255.255.128 255.255.255.192 255.255.255.192 255.255.255.192 N/A N/A 192.168.0.1 192.168.0.129 192.168.1.1 192.168.1.65 192.168.1.65 192.168.1.250 192.168.1.245 192.168.1.1 192.168.1.65 255.255.255.252 255.255.255.252 255.255.255.192 255.255.255.192 N/A N/A N/A N/A 209.165.201.6 192.0.2.2 192.168.0.1 192.168.0.129 255.255.255.252 266.255.255.252 255.255.255.128 255.255.255.128 N/A N/A N/A N/A Address 192.168.1.249 192.168.1.253 Subnet Mask 255.255.255.252 255.255.255.252 Default Gateway N/A N/A
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
b. Using the Addressing Table, configure and activate all the necessary interfaces on E-Branch2. c. Configure correct host IP addressing. Configure EPC2 with the last IP address in the subnet. Configure EPC4 with the last IP address in the subnet.
Router(config)# hostname EB2 EB2(config)#enable secret class EB2(config)#line vty 0 4 EB2(config)#password class EB2(config)#login EB2(config)#line console 0 EB2(config)#password class EB2(config)#banner motd %Authorized access only!%
EC2 192.168.0.254 255.255.255.128 Default gateway 192.168.0.129 EC4 192.168.1.126 255.255.255.192 Default gateway 192.168.0.65
EB2(config )#interface Fa0/0 EB2(config-if)#ip address 192.168.1.1 255.255.255.192 EB2(config-if)#no shutdown EB2(config )#interface Fa0/1 EB2(config-if)#ip address 192.168.1.65 255.255.255.192 EB2(config-if)#no shutdown EB2(config )#interface s0/0/0 EB2(config-if)#ip address 192.168.1.254 255.255.255.252 EB2(config-if)#no shutdown EB2(config )#interface s0/0/1 EB2(config-if)#ip address 192.168.1.246 255.255.255.252 EB2(config-if)#no shutdown
b. Verify static and default routing. EastHQ(config)#ip route 172.16.100.0 255.255.255.0 192.0.2.1 EastHQ(config)#ip route 0.0.0.0 0.0.0.0 serial0/1/0
EB1(config-router)#network 192.168.1.250 255.255.255.252 EB1(config-router)#network 192.168.1.245 255.255.255.252 EB1(config-router)#passive-interface fa0/0 EB1(config-router)#passive-interface fa0/1
EB2(config)#router eigrp 100 EB2(config-router)#network 192.168.1.1 255.255.255.192 EB2(config-router)#network 192.168.1.65 255.255.255.192 EB2(config-router)#network 192.168.1.254 255.255.255.252 EB2(config-router)#network 192.168.1.246 255.255.255.252 EB2(config-router)#passive-interface fa0/0 EB2(config-router)#passive-interface fa0/1