Beruflich Dokumente
Kultur Dokumente
Summary
1 2 3 4 5
Front Cover Summary Introduction Channels & Frequencies Circular Polarization Tuned
7 8
Vertical Polarization
10 11 12 13 14
15
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
Vertical Polarization High Power Panel Radio FM Splitters Radio FM Filters Radio FM Combiners MY-1130 MY-1150 MY-1180/90 MY-1140 MY-1170 MY-1160 DAB Splitters DAB Filters DAB Combiners MY-BI Panel MY-BIII 2D Panel MY-BIII 4D Panel 2D BIII D Panel BIII yagi Splitters BIII Filters BIII Combiners BIII MY-BIV/V 4 D Panel CI MY-BIV/V 4 D Panel MY-YINX-N UHF Splitters UHF Filters UHF Combiner UHF MY-DVB Panel Splitters DVB Filters DVB Combiner DVB Accessories
MY-Heliax MY-Ciclone MY-Syren MY-TetraQ MY-TetraQ2 MY-TetraQ3 MY-4DC MY- Yinx- FM MY-FMPL MY-FMPL2 MY-GM MY-GM2Y MY-GM3Y MY-BII Panel
FM Radio
DAB
TV B I TV BIII
UHF BIV/V TV
DVB
Accesories
34
Address
Summary
MOYANO is since 1960 the pioneer Company in the Spanish Radio Frequencies technology, basing its development in the design and construction of Antennas, Power devices and Telecommunication Towers. MOYANO is today the company that offers to their clients the best solutions in technology and Infrastructure for Broadcast Networks. The technological development based in the applied engineering facility is fully supported by a production group as well as installtion and maintenance division. Quality: MOYANO is a company who incorporates highly qualified personnel in its full range of products. Since its creation there has been special emphasis in the production quality to be superior to the general customer expectations Our installations incorporate the most modern technical facilities: Anechoic chambers, spectrum and network analysers, intermodulation product testing equipment, software to calculate radiation diagrams, calculation of coverege areas, antennas testing range, software to simulate electromagnetic structures, etc...
Broadcast
We offer the design, manufacture and installation of antennas, multiplexors, filters and other components for radiating systems such as TV/Radio Broadcasting systems.
We have standard solutions an custom made designs for low, medium and high power systems, obtaining high gain, power and coverage.
Our range of products include Medium Wave and Bands I, II, III, IV/V (44-860 MHz) in several polarizations; horizontal, vertical, circular.
Asian countries and Australia Color VHF PAL B PAL & SECAM (H) B PAL B PAL B SECAM D PAL D SECAM(V) B PAL B PAL B SECAM(H) B NTSC M PAL B PAL B NTSC M PAL B PAL B NTSC M PAL B NTSC M
RADIO FM Banda II
Tuned
Special balun to minimize tower influences. Easy tube instalation in array configuration Length Width Height Weight Mounting Wind Speed Materials 1300 mm 400 mm 600 mm 8 Kg To suit pole 60 mm 160 Km/h Feeding lines galvanized steel Helix in copper, teflon isolators
MY - CYCLONE
Technical Specification Frequency 87.5 - 108 MHz Tuned Polarization Circular Azimuthal Pattern Omni +/- 2dB ex-tower influence Axial Ratio +/-3 dB free space Gain 2.15 dBi VSWR < 1.1 : 1 150 KHz Impedance 50 Power Handling 600 w Connectors N(F) Lightning Protection DC Grounded
Factory tuned upon request. Specially suited for individual use or stacked medium power systems Length Width Height Weight Mounting Wind Speed Materials 1230 mm 305 mm 700 mm 3.8 Kg To suit pole 25 - 70 mm 160 Km/h Stainless steel, plated brass and PVC
MY - SYREN
Technical Specification Frequency 87.5 - 108 MHz Tuned Polarization Circular Azimuthal Pattern Omni +/- 2dB ex-tower influence Axial Ratio +/-3 dB free space Gain 2.15 dBi VSWR < 1.1 : 1 200 KHz Impedance 50 Power Handling 4 Kw Connectors EIA 7/8" Lightning Protection DC Grounded
Factory tuned upon request. Specially suited for individual use or stacked medium power systems Length Width Height Weight Mounting Wind Speed Materials 1300 mm 325 mm 800 mm 4.8 Kg To suit pole 25 - 70 mm 160 Km/h Stainless steel, silver-plated brass and PVC Radomized connector for ice protection
MY-Cyclone BAYS 2 4 6 8 12 GAIN 5 dBi 8 dBi 10 dBi 11 dBi 13 dBi LENGTH 2.5 m 7.5 m 12.5 m 17.5 m 27.5 m POWER (Kw) 0.6 2.4 3.6 4.8 7.2 INPUT SPLITTER N(H) DIN 7/16 DIN 13/30 or EIA7/8 DIN 13/30 or EIA7/8 EIA 1 5/8 POWER (Kw) 8 10 12 12 30
MY-Syren INPUT SPLITTER EIA 1 5/8 EIA 1 5/8 EIA 1 5/8 EIA 1 5/8 EIA 3 1/8
MY-Heliax POWER (Kw) 4 8 12 16 24 INPUT SPLITTER EIA 1 5/8 EIA 1 5/8 EIA 1 5/8 EIA 3 1/8 EIA 3 1/8
RADIO FM Banda II
Circular
Polarization
Broadband
Individual fed, enabling polarization control and possibility of using each conector in separate transmiters Length Width Height Weight Mounting Wind Speed Materials 900 mm 1300 mm 1300 mm 28 Kg To suit pole 60 or 101 mm 30 Kg Front @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse
MY - Tetra Q
Technical Specification Frequency 87.5 - 108 MHz Polarization Circular Azimuthal Pattern Omni 1.5dB Axial Ratio 3 dB in 240 Gain 2.15 dBi VSWR < 1.3 : 1 Broadband Impedance Power Handling Connectors Lightning Protection 50 2 x 2,5 Kw 2 X DIN 7/16 DC Grounded
Tetra Q BAYS 2 4 6 8 GAIN (dBd) ( each polarization) 1.7 4.7 6.5 7.7 4,4 m 10 15 20.6 LENGTH POWER (Kw) 10 20 30 40 INPUT SPLITTER EIA 1 5/8 EIA 3 1/8 EIA 3 1/8 EIA 4 1/8 WEIGHT (Kg) 30 60 90 120
MY - Tetra Q2
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to Back Ratio 87.5 - 108 MHz Circular 110 75 6.6 dBi < 1.2 : 1 Broadband 50 2 x 2,5 Kw 2 X DIN 7/16 DC Grounded > 12 dB
Ideal for several faces mounting in triangular or square towers. Length Width Height Weight Mounting Wind Load Materials 1000 1700 1700 57 mm mm mm Kg
To suit pole 60 or 101 mm 90 Kg Front @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse
MY - Tetra Q3
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to Back Ratio 87.5 - 108 MHz Circular 70 100 7.5 dBi < 1.15 : 1 Broadband 50 2 x 2,5 Kw 2 X DIN 7/16 DC Grounded > 15 dB Tetra Q2 BAYS FACES 2 3 2 3 2 3 GAIN (dBd) (each polarization) 0.8 -1 3.8 2 5.5 3.7 POWER (Kw) 10 15 20 30 30 45
High Gain. Ideal for several faces mounting in triangular or square towers. Length Width Height Weight Mounting Wind Load Materials 1300 1700 1700 65 mm mm mm Kg
To suit pole 60 or 101 mm 95 Kg Front @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse
Tetra Q3 ( each polarization) GAIN ( dBd) / POWER FACES BAYS 1 2 4 6 8 5.3 8.3 10.2 11.3 1 5 Kw each bay 2 10 Kw each bay 1,7 4,7 7,7 9,5 10,7 3 15 Kw each bay 0,2 3,2 6,2 8.0 9.3 4 20 Kw each bay -1,1 1,8 4,8 6,7 7,8 LENGTH (Mts) 1,7 4 8,6 13,2 18
1 2 3
RADIO FM Banda II
Circular
Polarization
MY - 4DC
Technical Specification Frequency 87.5 - 108 MHz Polarization Circular H Beamwidth 70 V Beamwidth 60 Gain 9,5 dBi VSWR < 1.1 : 1 Broadband 50 Impedance Power Handling & Conectors DC1 2 X DIN 7/16 DC2 2 X DIN 13/30 DC3 1 X EIA 1 5/8" Lightning Protection DC Grounded Front to Back Ratio > 18 dB
High Power:10 Kw per panel. Ideal for stacking for any radiation pattern Length Width Height Weight Mounting Wind Load Materials 2 x 2,5 Kw 2 x 5 Kw 10 Kw 900 mm 2315 mm 2315 mm 140 Kg To suit pole 114 mm 210 Kg Front @ 150 Km/h 30 Kg Side @ 150 Km/h Hot dip galvanized dipoles. Feeding lines in copper, Teflon isolators, hot dip galvanized reflector grid.
MY-4DC Panel BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) (each polarization) 1.5 0.1 -1.2 7.3 4.5 3.3 1.8 10.3 7.5 6.3 4.8 12.1 9.3 8.1 6.6 13.3 10.5 9.3 7.8 WEIGHT (Kgs) 280 420 560 280 560 840 1120 560 1120 1680 2240 840 1680 2520 3360 1120 2240 3360 4480 23.7 17.6 11.5 5.3 2.3 LENGHT (Mts)
RADIO FM Banda II
Lineal Polarization
MY - BII2DD-TT -A -G
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance 87.5 - 108 MHz Horizontal 80 60 7 dBd < 1.2 : 1 Broadband 50 EIA 7/8" EIA 1 5/8" Lightning Protection Front to Back Ratio DC Grounded > 18 dB
32 Al / 93 Stain Kg To suit pole 42-114 mm 33Kg Front @ 160 Km/h 12 Kg Side @ 150 Km/h Galvanized/Aluminum dipoles. Feeding lines in copper, Teflon isolators, hot dip galvanized/Aluminum reflector grid. 2600x1800x220mm 225 Km/h
MY-BII2DD Panel BAYS F 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 3.8 2.1 -0.3 9.8 6.8 5.1 2.7 12.8 9.8 8.1 5.7 14.6 11.6 9.9 7.5 15.8 12.8 11.1 8.7 WEIGHT (Kgs) 64 96 128 64 128 192 256 128 256 384 512 192 384 576 768 256 512 768 1024 12.5 10 7.5 5 2.5 LENGHT (Mts)
RADIO FM Banda II
Lineal Polarization
MY - BII2DD-ST -A -G
Technical Specification Frequency Polarization E Beamwidth H Beamwidth Gain VSWR Impedance 87.5 - 108 MHz Horizontal / Vertical 70 60 7.5 dBd < 1.15 : 1 Broadband 50 EIA 7/8" EIA 1 5/8" Lightning Protection Front to Back Ratio DC Grounded > 18 dB
36 Al/ 104 Gal Kg To suit pole 42-114 mm 150Kg Front @ 150 Km/h 25 Kg Side @ 150 Km/h Galvanized/Aluminum dipoles. Feeding lines in copper, Teflon isolators, hot dip galvanized/Aluminum reflector grid. 1500x2500x220mm 225 Km/h
MY-BII2DD Panel BAYS F 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 4.3 2.6 0.2 10.3 7.3 5.6 3.2 13.3 10.3 8.6 6.2 15.1 12.1 10.4 8 16.3 13.3 11.6 9.2 WEIGHT (Kgs) 208 312 416 208 416 624 832 416 832 1248 1664 416 832 1872 1664 416 832 2496 1664 23.3 17.3 11.3 5.3 2.3 LENGHT (Mts)
RADIO FM Banda II
2Kw/5Kw
87.5 - 108 MHz Vertical Omni ex-tower influence 80 2.15 dBi < 1.3 : 1 Broadband 50 2 Kw / 5 Kw DIN 7/16 EIA 7/8" DC Grounded
Specially suited for individual use or stacked medium power Systems. Gamma match adaptation Length Width Height Weight Mounting Wind Load Materials 857 mm 120 mm 1352 9 Kg To suit pole 60 mm 12 Kg @ 160 Km/h Fully Stainless Steel, silver-plated brass copper-berylium and PTFE
MY - FMPL2Y
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection
2Kw/5Kw
87.5 - 108 MHz Vertical 180 80 5,15 dBi < 1.3 : 1 Broadband 50 2 Kw / 5 Kw DIN 7/16 EIA 7/8" DC Grounded
Specially suited for individual use or stacked medium power Systems. Gamma match adaptation Length Width Height Weight Mounting Wind Load Materials 857 mm 120 mm 1734 mm 11 Kg To suit pole 60 mm 25 Kg @ 160 Km/h Fully Stainless Steel, silver-plated brass copper-berylium an PTFE
FMPL BAYS 2 4 6 8 10 VERTICAL BEAMWIDTH 36 17 11 9 7 JUMPERS CABLE LENGTH 3m 9m 15 m 21 m 27 m POWER (Kw) 4/10 8/12 12 16/40 20/40 GAIN (dBi) 5 8 10 11 12 INPUT SPLITTER 1 5/8 1 5/8 1 5/8 3 1/8" 3 1/8" GAIN (dBi) 8 11 13 14 15
RADIO FM Banda II
Radome Colour
MY - GM2YS
Technical Specification Frequency 87.5 - 108 MHz Polarization Vertical H Beamwidth 220 V Beamwidth 67 Gain 5,15 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling & Conectors DIN 7/16 2,5 Kw EIA 7/8" 4 Kw DIN 13/30 5 Kw Lightning Protection DC Grounded Front to Back Ratio > 6 dB
Also Omnidirectional and super-directive versions Length Width Height Weight Mounting Wind Load Materials 1000 mm 333 mm 2090 mm 28.5 Kg To suit pole 60 mm 42 Kg @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse Red
Radome Colour
MY - GM3YS
Technical Specification Frequency 87.5 - 108 MHz Polarization Vertical H Beamwidth 150 V Beamwidth 70 Gain 5,5 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling & Conectors DIN 7/16 2,5 Kw EIA 7/8" 4 Kw DIN 13/30 Lightning Protection Front to Back Ratio DC Grounded > 12 dB 5 Kw
Wide Band. Excellent beaming pattern. Also Omnidirectional an super-directive versions Length Width Height Weight Mounting Wind Load Materials 1320 mm 333 mm 2090 mm 30.5 Kg To suit pole 60 mm 55 Kg @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse Red
Radome Colour
GAIN (dBd) BAYS 2 4 6 8 10 POWER (Kw) 5 10 15 20 25 BEAMWIDTH H 36 17 11 8 7 LENGTH (Mts) 4.2 9.2 15 21.3 27 GM 5 8 10 11 12 GM2Y 8 11 13 14 15 GM3Y 8.5 11.5 13.5 14.5 15.5
RADIO FM Banda II
Radome Colour
9 BIS
HIGH GAIN
High Power:10 Kw per panel. Ideal for stacking for any radiation pattern Length Width height Weight Mounting Wind Load Materials 970 mm 2290 mm 2480 mm 130 Kg To suit pole 113 mm 147 Kg @ 160 Km/h Hot dip galvanized dipoles. Feeding lines in copper, Teflon isolators, hot dip galvanized reflector grid.
MY-2DV Panel BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 4.7 3 1.7 10.7 7.7 6 4.6 13.7 10.7 9 7.6 15.5 12.5 10.8 9.4 16.7 13.7 12 10.6 WEIGHT (Kgs) 260 390 520 260 520 780 1040 520 1040 1560 2080 780 1560 2340 3120 1040 2080 3120 4160 21.4 16 10.6 4.6 2.29 LENGHT (Mts)
10
RADIO DAB
MY - 1130
Technical Specification Frequency 195 - 223 MHz Polarization Vertical H Beamwidth Omni V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection 28 5 dBi < 1.5 : 1 Broadband 50 500 W DIN 7/16 Female DC Grounded
Colinear antena. High gain design. Low profile & lightweight. High peak power rating. Low intemodulation products Length Diameter Weight Mounting Wind Load Materials 3260 65 8 To suit pole 60 mm 35 Kg @ 180 Km/h Plated connector. Copper dipoles, aluminium spigot. Rugged fibreglass protection radome All parts welded mm mm Kg
MY- 1150
Technical Specification Frequency 195 - 223 MHz Polarization Vertical H Beamwidth Omni (ex-tower influence) V Beamwidth 80 Gain 2,15 dBi VSWR < 1.3 : 1 Broadband 50 Impedance Power Handling 2 Kw Connectors DIN 7/16 Lightning Protection DC Grounded Tower influence 3-5 dB MY-1150 BAYS 2 4 6 8 10 VERTICAL BEAMWIDTH 36 17 11,4 8,5 7 GAIN (dBi) 5 8 10 11 12
DAB dipole. Gamma match adaptation. Fully stainless steel Length Width Heigth Weight Mounting Wind Load Materials 430 mm 125 mm 700 mm 6 Kg To suit pole 60 mm 25 Kg @ 160 Km/h Stainless steel, silver plated brass, copper-berylium and PTFE
POWER (Kw) 4 8 12 16 20
INPUT SPLITTER EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8"
MY- 1180
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection 195 - 223 MHz Vertical 160 18 10 dBi < 1.5 : 1 Broadband 50 1 Kw DIN 7/16 (F) DC Grounded
Four Folded Colinear Dipoles. Electrical tilt available. Offsset horizontal radiation pattern. Length Diameter Weight Mounting Wind Speed Materials Temperature 5000 48 14 To suit pole 60 mm 18 Kg @ 160 Km/h Stainless steel pole and dipoles -55C to +65C mm mm Kg
14
RADIO FM Banda II
Typical Length
MY-S2
MY-S211x MY-S222x MY-S232x MY-S242x MY-S244x MY-S252x MY-S253x MY-S254x MY-S255x MY-S272x MY-S273x MY-S274x MY-S275x MY-S277x MY-S284x MY-S285x MY-S286x MY-S287x MY-S297x MY-S207x
Input connector code type N(F) DIN 7/16 (F) EIA 7/8" DIN 13/30 (F) code 1 2 3 4 4 5 EIA 1 5/8" 5 5 5 7 EIA 3 1/8" 7 7 7 7 8 8 8 8 9 0
Output connector code type N(F) DIN 7/16 DIN 7/16 DIN 7/16 DIN 13/30 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" DIN 13/30 EIA 1 5/8" DIN 29/66 EIA 3 1/8" EIA 3 1/8" EIA 4 1/2" code 1 2 2 2 4 2 3 4 5 2 3 4 5 7 4 5 6 7 7 7 x x x x x x x x x x x x x x x x x x 2 x x 3 x x 4 x x x x
Way number 5 6 x x x x x x x x x x x x x x x x x x x x x x 8 10 12
x x x x x x x x x
11
RADIO FM Banda II
MY-F2
Power code Insertion Loss (dB) 0.7 dB 0.3 dB 0.5 dB 0.7 dB 0.3 dB 0.4 dB 0.7 dB 0.2 dB 0.3 dB 0.7 dB 0.1 dB 0.2 dB 0.6 dB 0.1 dB 0.2 dB 0.6 dB Atenuation (dB) fo +/- 2MHz 35 dB 18 dB 32 dB 45 dB 22 dB 37 dB 55 dB 24 dB 42 dB 60 dB 25 dB 45 dB 60 dB 25 dB 45 dB 60 dB fo +/- 6 MHz 60 dB 38 dB 60 dB 80 dB 40 dB 60 dB 80 dB 40 dB 65 dB 80 dB 40 dB 65 dB 80 dB 40 dB 65 dB 80 dB Length 300 328 476 624 400 600 800 674 998 1322 982 1427 1875 1338 1970 2600 Dimensions (mm) Heigth 400 924 924 924 950 950 950 1050 1050 1050 1050 1050 1050 1050 1050 1050 Width 100 180 180 180 200 200 200 350 350 350 495 495 495 686 686 686 Weight (Kg) 12.5 25 37 49 36 52.5 69 69 100.5 132 100 140 180 140 190 240
Power MY-F2003 MY-F2012 MY-F2013 MY-F2014 MY-F2032 MY-F2033 MY-F2034 MY-F2052 MY-F2053 MY-F2054 MY-F2102 MY-F2103 MY-F2104 MY-F2202 MY-F2203 MY-F2204 20 Kw 10 Kw 5 Kw 2 Kw 1 Kw 300 W
code 00 01 01 01 03 03 03 05 05 05 10 10 10 20 20 20
code / cavities 3 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4
Connectors N(F) DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8"
Vertical Output for easier Other Input/Output connector uppon request Higher than 20 Kw, contact factory
12
RADIO FM Banda II
MY-CS2
Insertion Loss 0.9 dB 0.4 dB 0.6 dB 0.8 dB 0.3 dB 0.5 dB 0.7 dB 0.2 dB 0.4 dB 0.7 dB 0.1 dB 0.2 dB 0.6 dB 0.1 dB 0.2 dB 0.6 dB
MY-CS2003x MY-CS2012x MY-CS2013x MY-CS2014x MY-CS2032x MY-CS2033x MY-CS2034x MY-CS2052x MY-CS2053x MY-CS2054x MY-CS2102x MY-CS2103x MY-CS2104x MY-CS2202x MY-CS2203x MY-CS2204x
DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8"
MY-CD2
Insertion Loss in Narrow Band 0.7 dB 0.3 dB 0.5 dB 0.7 dB 0.3 dB 0.5 dB 0.7 dB 0.2 dB 0.3 dB 0.7 dB 0.1 dB 0.2 dB 0.6 dB 0.1 dB 0.2 dB 0.6 dB
Insertion Loss in Wide Band (without filter) 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB
MY-CD2003x MY-CD2012x MY-CD2013x MY-CD2014x MY-CD2032x MY-CD2033x MY-CD2034x MY-CD2052x MY-CD2053x MY-CD2054x MY-CD2102x MY-CD2103x MY-CD2104x MY-CD2202x MY-CD2203x MY-CD2204x
2 Kw
DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8"
5 Kw
13
Disponibles en norma EIA para 1 5/8" hasta 6 1/8" con 3,4 o 7 puertos. Incluyen opcionalmente interruptores de traba, lo que impide maniobras incorrectas. Disponible con transiciones a lnea sin brida. Diseado para radio FM, TV analgica, DAB y DVB.
Typical VSWR< 1.07 Insertion loss < 0.07 dB full band In the 7 ports pach panel version, you can: (with power splitter) 1) Out over the two halves 2) Out over the botom half 3) Out over the upper half 4) Out over the dummy load
Patch panel with diplexer embendded for BIII Cuadro conmutador con multiplexor embebido
Patch panel with U-links with integrated power splitter Cuadro de conmutacin con divisor de potencia integrado wide / altura 160 160 length/frente 82 100 deep/profundo 82 100
Suitble for mounting in a 19" rack normalized (Fabricado para montaje en rack 19") Orientatives dimension of 7-ports patch panel Dimensiones orientativas para cuadro de 7 bocas
4 1/2" 6 1/8"
HIGH GAIN
DAB 2 Dipoles panel antenna. Wideband & multichannel capability. High reliability & long operative life.
To suit pole 42 - 48 mm Front 65 Kg, Side 28 Kg @ 200 Km/h hot dip galvanized reflector and dipoles plated connectors. passive brass in feeding lines
MY - 1170
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to back ratio 174 - 230 MHz Horizontal 70 30 13,5 dBi < 1.1 : 1 Broadband 50 2 Kw / 5 Kw DIN 7/16 / DIN 13/30 DC Grounded > 18 dB Vertical 60 26
DAB 4 dipoles panel antenna. Wideband & multichannel capability. High reliability & long operative life. Length Width Height Weight Mounting Wind Load Materials 515 1240 2840 83 mm mm mm Kg
To suit pole 75,5 mm (2 1/2") Front 120 Kg, Side 45 Kg @ 200 Km/h hot dip galvanized reflector and dipoles plated connectors. passive brass in feeding lines
MY- 1160
Technical Specification Frequency Polarization VSWR Impedance Power Handling Connectors Lightning Protection Front to Back Ratio 195 - 223 MHz Horizontal and Vertical < 1.3:1 fo +/-2% < 1.5:1 fo +/-10% 50 100 w N (F) DC Grounded 16 to 20 dB
Yagi DAB. Several Gains. Light and strong design Weight Mounting Wind Speed Materials Temperature 2 to 10 Kg To suit pole 50 to 60 mm 200 Km/h Stainless steel and teflon -40C to +70C
MY-1160 Gain MY-1160-011 MY-1160-111 MY-1160-211 MY-1160-311 MY-1160-411 MY-1160-511 MY-1160-711 (dBi) 5 7 8.5 10 11.5 12 13 Beamwidth E () 75 65 60 52 45 38 31 Beamwidth H () 170 105 80 63 56 50 45 Lenght (mm) 395 654 1084 1422 1760 2098 2774
15
RADIO DAB
Technical Specification Frequency 174 - 230 MHz VSWR < 1.05 : 1 Broadband Impedance 50 Insertion loss < 0,18 dB Power From 0.6 to 20 Kw Input Connector EIA / DIN Output Connector EIA / DIN Distribution Symmetrical phase & amplitude
Typical Length
MY-S3
MY-S322x DAB MY-S332x DAB MY-S352x DAB MY-S353x DAB MY-S355x DAB MY-S372x DAB MY-S373x DAB MY-S375x DAB MY-S377x DAB
Way number 2 x x x x x x x x x x x x 3 x x x x x x 4 5 6 8 10 12
type
DIN 7/16 (F) EIA 7/8" EIA 1 5/8"
code
2 3 5 5 5 7
type
DIN 7/16 DIN 7/16 DIN 7/16 EIA 7/8" EIA 1 5/8" DIN 7/16 EIA 7/8" EIA 1 5/8" EIA 3 1/8"
code
2 2 2 3 5 2 3 5 7
EIA 3 1/8"
7 7 7
16
RADIO DAB
MY-FA
Power code Input connector EIA 1 5/8" EIA 1 5/8" Insertion Loss fo 1 dB 0.9 dB Atenuation (dB) fo +/- 0.77MHz 1.8 dB 1.5 dB fo +/-0.97 MHz 11 dB 11 dB fo +/- 1.75 MHz 44 dB 44 dB Length 623 923 Dimensions (mm) Heigth 541 541 Width 426 626 Weight (Kg) 85 102
Power 1 Kw 1.5 Kw
code 00 01
MY-FA00 MY-FA01
17
TV Banda I
MY - BI-D
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Power Handling & Conectors Impedance Lightning Protection 47-68 MHz (CCIR) / 54-88 MHz (FCC) H 72 56 9.2 dBi < 1.1 : 1 (Factory tuned for 1 Channels) < 1.3 : 1 (Factory tuned for 3 Channels) EIA 1 5/8" 12 Kw 50 DC Grounded Length (mm) Width (mm) Height (mm) Weight (Kg) Wind Load (Kg) Wind Speed (Km/h) Mounting Materials 2-3-4 2840 3760 1400 140 FCC CHS 3-4-5 2540 3400 1300 130 80 200 To suit pole 114 mm (4") Hot dip galvanized dipoles and reflector grid. Feeding lines in copper, Teflon isolators 4-5-6 2340 3100 1200 110
Y-BI Panel Detachable BAYS FACES GAIN (dBd) 3.7 2 -0.4 9.7 6.7 5 2.6 12.7 9.7 8 5.6 14.5 11.5 9.8 7.4 15.7 12.7 11 8.6 41 37 33 30.5 28 24 20 18 16 9.3 9 8 2-3-4 4 LENGHT (Mts) FCC CHS 3-4-5 3.6 4-5-6 3.2 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4
MY-S1
MY-S122x MY-S132x MY-S112x MY-S144x MY-S152x MY-1533x MY-S154x MY-S155x MY-S172x MY-S173x MY-S174x MY-S175x MY-S177x MY-S184x MY-S185x MY-S187x
Way number
2 x X x x x x x x x x 3 x X x x 4 x x x x x x x x x x x x x x x x x x x x x x x x x x x x 5 X x 6 x x x x x x x x 8 10 12
type
DIN 7/16 (F) EIA 7/8" DIN 13/30 (F)
code
2 3 4 4 5 5 5 5 7 7
type
DIN 7/16 DIN 7/16 DIN 7/16 DIN 13/30 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8"
code
2 2 2 4 2 3 4 5 2 3 4 5 7 4 5 7
EIA 1 5/8"
EIA 3 1/8"
7 7 7 8
EIA 4 1/2"
8 8
19
RADIO DAB
MY-CSA
Power code
N inputs Atenuation (dB) Dimension s (mm) fo +/- 1.75 MHz 44 dB 44 dB Length 650 950 Heigth 1100 1100 Width 500 650 Weight (Kg) 175 215
Input
code
code
MY-CSA012 MY-CSA022
1 Kw 1.5 Kw
01 02
2 2
MY-CDA
N inputs code 2 2 Insertion Loss in Narrow Band 1 dB 0.9dB Atenuation (dB) fo +/- 0.77MHz 1.8 dB 1.5 dB fo +/-0.97 MHz 11 dB 11 dB fo +/- 1.75 MHz 44 dB 44 dB Dimension s (mm) Length 900 1200 Heigth 1400 1400 Width 600 750 Weight (Kg) 190 230
MY-CDA002 MY-CDA012
1 Kw 1.5 Kw
00 01
Other Input/Output connector uppon request Other Powers or adjacent blocks, contact factory
18
Horizontal
Polarization
MY - BIII42DD
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling & Conectors Lateral lobe level Lightning Protection 174 - 230 MHz Horizontal 65 30 12.5 dBi < 1.15 : 1 Broadband 50 2 > 10 dB DC Grounded Length Width Height Weight Mounting Wind Load Materials Packing Wind Survival 2660 1200 400 mm mm mm
15 Kg To suit pole 42-76 mm 880/400N Front @ 160 Km/h Weatherproof aluminum & tefln 1410x1265x110 mm 200 Km/h
No.
Paneles
of Bays
per bay
Antenna
Windload
kN (@ 160 Km/h)
2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4
7.5 5.73 4.5 10.5 8.8 7.5 12.3 10.5 9.3 11.5 11.8 10.5 14.5 12.8 11.5 15.3 13.5 12.3
5.6 3.7 2.8 11.2 7.5 5.6 16.8 11.2 8.5 22.5 15 11.2 28 18.7 14 33.6 22.5 16.8
94 141 188 188 282 376 282 423 564 376 564 752 470 705 940 564 846 1128
2.66
5.6
8.5
11.4
14.4
17.3
2.2 3.4 4 4.4 6.8 8 6.6 10.2 12 8.8 13.6 16 11 17 20 13.2 20.4 24
(1) At mid band (2) Distance between two panels edges as 260 mm
TV Banda III
DIRECTIONAL PANEL
HIGH GAIN
MY-BIII2D-G
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to back ratio 174 - 230 MHz Horizontal 70 60 10 dBi < 1.15 : 1 Broadband 50 2 Kw / 5 Kw DIN 7/16 / DIN 13/30 DC Grounded > 18 dB Temperature Vertical 60 70 Height Width Deep Weight Mounting Wind Load Materials 1240 1240 574 25 mm mm mm Kg
To suit pole 42 - 48 mm Front 65 Kg, Side 28 Kg @ 200 Km/h hot dip galvanized reflector and dipoles plated connectors. passive brass in feeding lines
MY - 4D BIII PANEL
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to back ratio 174 - 230 MHz Vertical 60 26 13,5 dBi < 1.1 : 1 Broadband 50 2 Kw / 5 Kw DIN 7/16 / DIN 13/30 DC Grounded > 18 dB Temperature Height Width Deep Weight Mounting Wind Load Materials 2840 1240 515 83 mm mm mm Kg
To suit pole 75,5 mm (2 1/2") Front 120 Kg, Side 45 Kg @ 200 Km/h hot dip galvanized reflector and dipoles plated connectors. passive brass in feeding lines
MY-4D BIII Panel BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 8.2 6.7 5.8 13.8 11.2 9.7 8.8 16.8 14.2 12.5 11.7 18.5 15.8 14.3 13.4 19.8 17.2 15.7 14.8 WEIGHT (Kgs) 166 249 332 166 332 498 664 332 664 996 1328 498 996 1494 1992 664 1328 1992 2656 23.2 17.4 11.6 5.8 2.9 LENGHT (Mts) POWER (Kw) DIN 7/16 DIN 13/30 4 6 8 4 8 12 16 8 16 24 32 12 24 36 48 16 32 48 64 10 15 20 10 20 30 40 20 40 60 80 30 60 90 120 40 80 120 160
20
TV Banda III
HIGH GAIN
Demountable panel. Ideal for stacking for any radiation pattern. Length Width Depth Weight Mounting Wind Load Wind Velocity Materials Temperature 450 1200 1200 7 To suit pole 42 - 114 mm Front 33 Kg, Side 12 Kg @ 160 Km/h 200 Km/h Aluminium -40C to +70C mm mm mm Kg
Yagi BIII. Several Gains. Light and strong design Weight Mounting Wind Speed Materials Temperature 2 to 10 Kg To suit pole 50 to 60 mm 200 Km/h Stainless steel and teflon -40C to +70C
MY-1160 Gain MY-1160-011 MY-1160-111 MY-1160-211 MY-1160-311 MY-1160-411 MY-1160-511 MY-1160-711 (dBi) 5 7 8.5 10 11.5 12 13 Beamwidth E () 75 65 60 52 45 38 31 Beamwidth H () 170 105 80 63 56 50 45 Lenght (mm) 395 654 1084 1422 1760 2098 2774
21
TV Banda III
Typical Length
Vertical Output for easier instalation. Other Input/Output connector uppon request Other powers, contact factory MY-S3
MY-S311x MY-S322x MY-S332x MY-S342x MY-S344x MY-S352x MY-S353x MY-S354x MY-S355x MY-S372x MY-S373x MY-S374x MY-S375x MY-S377x MY-S384x MY-S385x MY-S387x MY-S307x Input connector code Output connector code Way number 2 x x x x x x x x 3 x x x x x x 4 x x x x x x x x x x x x x x x x x x x x x x 5 6 x x x x x x x x 8 10 12
type
N(F) DIN 7/16 (F) EIA 7/8" DIN 13/30 (F)
code
1 2 3 4 4 5 5 5 5 7 7 7 7 7 8 8 8 0
type
N(F) DIN 7/16 DIN 7/16 DIN 7/16 DIN 13/30 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" EIA 3 1/8"
code
1 2 2 2 4 2 3 4 5 2 3 4 5 7 4 5 7 7
EIA 1 5/8"
EIA 3 1/8"
x x
x x x x
MY-F3
Power code Power code 00 01 05 10 Input connector N(F) DIN 7/16 EIA 1 5/8" EIA 3 1/8" Output connector N(F) DIN 7/16 EIA 1 5/8" EIA 3 1/8" Insertion Loss (dB) 0.4 dB 0.4 dB 0.3 dB 0.2 dB Dimensions (mm) Length 350 600 800 1000 Heigth 250 600 620 620 Width 50 120 200 300 Weight (Kg) 3.5 30 70 100
500 W 1 Kw 5 Kw 10 Kw
22
TV Band III
Output Connector
MY-CS3
Power code Input Power code 00 01 05 10 Channel spacing minimum 4 Channels 4 Channels 4 Channels 4 Channels Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss 0.5 dB 0.4 dB 0.3 dB 0.2 dB
500 W 1 Kw 5 Kw 10 Kw
Output Connector
MY-CS3
Power code Input Power code 00 01 05 10 Channel spacing minimum 2 Channels 2 Channels 2 Channels 2 Channels Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss in Insertion Loss in Wide Band Narrow Band (without filter) 0.5 dB 0.4 dB 0.3 dB 0.2 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB
500 W 1 Kw 5 Kw 10 Kw
23
DIRECTIONAL PANEL
HIGH GAIN
Panel 4 Printed Dipoles. Ideal for stacking for any radiation pattern. 5 Channels in Vertical. Length Width Heigth Weight Mounting Wind Load Wind Speed Materials Temperature Radome 1000 mm 500 mm 220 mm 15 Kg To suit pole 48 mm 55 Kg Front @ 160 Km/h 200 Km/h Dipoles in printed circuit. Feeder lines in passived brass and silvery -40C to +70C PRFV in Red
MY-PDP500
Technical Specification Frequency 470 - 862 MHz Polarization Horizontal H Beamwidth 60 V Beamwidth 24 Gain 13,5 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling & Conectors N (F) 100 w DIN 7/16 (F) 500 w Crosspolar discrimination >32 dB Lightning Protection DC Grounded Front to Back Ratio > 22 dB
MY-PDL1000 / PDL2500
Technical Specification Frequency 470 - 862 MHz Polarization Lineal (Hor. or Vert.) H Beamwidth 60 (-3 dB) V Beamwidth 24 (-3 dB) Gain 13,5 dBi VSWR < 1.15 : 1 Broadband Impedance 50 Power Handling & Conectors DIN 7/16 (F) 1Kw DIN 13/30 8F) 2,5 Kw Crosspolar discrimination >32 dB Lightning Protection DC Grounded Front to Back Ratio > 22 dB
High Power:2,5 Kw per panel. Ideal for stacking for any radiation pattern. 7 Channels in Vertical. Length Width Heigth Weight Mounting Wind Load Wind Speed Materials Temperature Radome 1000 mm 500 mm 220 mm 22 Kg To suit pole 48 mm 55 Kg Front @ 160 Km/h 200 Km/h Dipoles in brass. Feeder lines in passived brass and silvery -40C to +70C PRFV in Red
GAIN (dBd) BAYS FACES 4 3 4 2 2 1 4 3 6 2 2 1 4 3 8 2 2 1 4 3 10 2 2 1 4 3 12 2 2 1 @ 650MHz 11.2 12.5 13.9 14.3 16.9 12.9 14.2 15.4 16 19.1 14.1 15.4 16.5 17.2 20.3 15.1 16.4 17.5 18.2 21.2 15.9 17.2 18.3 19 22
PATTERN OMNI WIDE CARDIOD EIGHT NARROW VERY NARROW OMNI WIDE CARDIOD EIGHT NARROW VERY NARROW OMNI WIDE CARDIOD EIGHT NARROW VERY NARROW OMNI WIDE CARDIOD EIGHT NARROW VERY NARROW OMNI WIDE CARDIOD EIGHT NARROW VERY NARROW
Attenuation of connecting cables not taken into account Gains calculated @ 650MHz and may vay across the UHF band
24
MY-YINX-UHF Type MY-YINX-13.1.1A MY-YINX-13.1.1B MY-YINX-13.1.1C MY-YINX-13.1.1D MY-YINX-13.1.1E MY-YINX-13.1.1F MY-YINX-13.1.1G Channels 21-27 28-34 35-41 42-48 49-55 56-62 63-69 Frequency (MHz) 470 - 526 526 - 582 582 - 638 638 - 694 694 - 750 750 - 806 806 - 862
25
MY-S4
MY-S411x MY-S422x MY-S432x MY-S442x MY-S444x MY-S452x MY-S453x MY-S454x MY-S455x MY-S473x MY-S474x MY-S475x MY-S477x MY-S484x MY-S485x MY-S487x MY-S407x
Input connector code type N(F) DIN 7/16 (F) EIA 7/8" DIN 13/30 (F) code 1 2 3 4 4 5 EIA 1 5/8" 5 5 5 7 EIA 3 1/8" 7 7 7 8 EIA 4 1/2" EIA 6 1/8" 8 8 0
Output connector code type N(F) DIN 7/16 DIN 7/16 DIN 7/16 DIN 13/30 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" EIA 4 1/2" code 1 2 2 2 4 2 3 4 5 3 4 5 7 4 5 7 7 x x x x x x x x x x x x x x x x x x x x x 2 x x 3 x x 4 x x x x
Way number 5 6 x x x x x x x x x x x x x x x 8 10 12
26
TV UHF
MY-F4
Power code Power code 00 02 05 10 Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Output Connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss (dB) 1 dB 0.4 dB 0.3 dB 0.2 dB Frequency Spacing (MHz) Atenuation 20 dB +/- 20 MHz +/- 20 MHz +/- 20 MHz +/- 20 MHz Atenuation 35 dB +/- 30 MHz +/- 35 MHz +/- 35 MHz +/- 35 MHz Length 175 344 491 578 Dimensions (mm) Heigth 120 430 400 440 Width 40 118 167 196 Weight (Kg) 1.5 11.5 18 23.5
500 W 2 Kw 5 Kw 10 Kw
Vertical Output for easier instalation. Other Input/Output connector uppon request Other powers, contact factory
27
TV UHF
MY-CS4
Power code Input Power code 00 02 05 10 Channel spacing minimum 4 Guard 4 Guard 4 Guard 4 Guard Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss 1 dB 0.4 dB 0.3 dB 0.2 dB
200 W 2 Kw 5 Kw 10 Kw
Output Connector
MY-CD4
Power code Input Power code 00 02 05 10 20 Channel spacing minimum 2 Guard 2 Guard 2 Guard 2 Guard 2 Guard Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 4 1/2" Insertion Loss in Narrow band 1 dB 0.4 dB 0.3 dB 0.2 dB 0.2 dB Insertion Loss in Wide Band (without filter) 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB
200 W 2 Kw 5 Kw 10 Kw 20 Kw
28
TV DVB
HIGH GAIN
Channels between 57-69. Ideal for stacking for any radiation pattern. Length Width Heigth Weight Mounting Wind Load Materials 140 350 700 11 mm mm mm Kg
To suit pole 42-48 mm Front 33 Kg, Side12 Kg @ 200 Km/h Hot dip steel reflector, fibre glass, plated connectors. Plated and passived brass in dipoles and feeder lines
MY-DVB PANEL BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 7.8 6.1 4.8 13.8 10.8 9.1 7.8 16.8 13.8 12.1 10.8 18.6 15.6 13.8 12.5 19.8 16.8 15.1 13.8 WEIGHT (Kgs) 10 15 20 10 20 30 40 20 40 60 80 30 60 90 120 40 80 120 160 5.95 4.45 2.95 1.45 0.7 LENGHT (Mts) 2 3 4 2 4 6 8 4 8 12 16 6 12 18 24 8 16 24 32 POWER (Kw) DIN 7/16 DIN 13/30 5 7.5 10 5 10 15 20 10 20 30 40 15 30 45 60 20 40 60 80
29
TV DVB
DVB
758 - 862 MHz < 1.05 : 1 Broadband 50 < 0,18 dB From 0.6 to 80 Kw N / EIA / DIN N / EIA / DIN Symmetrical phase & amplitude
Vertical Output for easier instalation. Number of outputs Materials 2 to 8 Electrolytic cupper, plated and passived brass, teflon isolators Leak proof by silicone tore joints. Cupper-beryllium connectors termical processed and silver plated 300 mm
Typical Length
MY-S4
MY-S422x DVB MY-S432x DVB MY-S442x DVB MY-S452x DVB MY-S553x DVB MY-S554x DVB MY-S555x DVB MY-S572x DVB MY-S573x DVB MY-S575x DVB MY-S585x DVB MY-S587x DVB
Input connector code type DIN 7/16 (F) EIA 7/8" DIN 13/30 (F) EIA 1 5/8" code 2 3 4 5 5 5 5 7 7 7 8 8
Output connector code type DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" DIN 7/16 EIA 7/8" EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" code 2 2 2 2 3 4 5 2 3 5 5 7 2 x x x x x x x 3 x x x x x x 4 x x x x x x
Way number 5 6 x x x x x x x x x x x x x x 8 10 12
30
TV DVB
28 (2)
TV DVB
MYC8P2N1K5
Technical Specifications Frequency range Max total power NB Input power Impedance Insertion loss Passband filters Fo (MHz) 0 3.8 4.2 6.0 12.0 Insertion loss WB 470 860 MHz 1.5 kW 400 W 50 @474 MHz < 0.7 dB < 1.6 dB < 8.0 dB < 40.0 dB < 60.0 dB < 0.1 dB DIN 7/16 (F) Connectors Return loss DVD mask Decoupling EIA 1 5/8 also available > 24 dB Critical. For adjacent channels > 35 dB @858 MHz < 1.10 dB < 2.40 dB < 8.00 dB < 40.0 dB < 60.0 dB
28 (3)
TV DVB
MYC6P0N6K
Technical Specifications Frequency range 470 862 MHz Max total power 6 kW NB Input power 1.6 W Impedance 50 < 0.40 dB @ 858MHz Insertion loss NB < 0.34 dB @ 474 MHz Insertion loss WB <0.05 dB EIA 1 5/8 Connectors Return loss > 24 dB Min spacing 1 guard channel Decoupling > 30 dB Bandwidth 8 MHz DVB-T Group delay < 200 ns Weight 24 Kg Colour Aluminium
28 (4)
8 MHz DVB-T standard < 350 ns 12 Kg Aluminium -10C to +50C < 4 KHz/K
> 35 dB @ Selectivity 12 MHz Bandwidt 8 MHz DVBInsertion loss < 0.32 dB @ 858 MHz h T standard < 0.24 dB @ 474 MHz < 1.5 dB @ 3.8 MHz Connector EIA 1 5/8 Group delay < 350 ns Weight 33 Kg Colour Aluminium Operating temperatu -10C to re +50C
28 (5)
ACCESORIES
RIGID LINE
Type of line Inner material Outer material Impedance D1 (mm/in) d1 D2 d2 Frec. range(GHz) Velocity (%) Average power / Attenuation @100 MHz * @200 MHz @400 MHz @600 MHz @800 MHz @1000MHz Peak Voltage (Kv)@ 60 Hz Peak Power (Kw)@ RF ** Weight 6 m (Kg) * ROE = 1 @ 80 C inner T
E := 3.17 10 d log
4 p
EIA 1 5/8" Low-loss copper Copper 50 41.28 1.63 38.79 1.53 16.87 0.66 14.93 0.59 2 99.8 Kw dB/100m 16 0.70 11 1.00 8 1.50 6 1.70 5 2.00 5 2.20 10 198 12
0.273 d
EIA 3 1/8" Low-loss copper Copper 50 79.38 3.13 76.88 3.03 33.4 1.31 31.27 1.23 1 99.8 Kw dB/100m 45 0.35 32 0.50 22 0.70 18 0.90 16 1.00 14 1.10 20 715 25
DIN 43/98 Low-loss copper Copper 50 100 3.94 98 3.86 42.55 1.68 40 1.57 0.9 99.8 Kw dB/100m 70 0.27 54 0.40 34 0.50 28 0.70 24 0.80 21 0.90 25 1133 45
EIA 4 1/2" Low-loss copper Copper 50 107 4.21 104 4.09 45 1.77 43 1.69 0.8 99.8 Kw dB/100m 80 0.26 56 0.37 40 0.50 32 0.60 28 0.70 25 0.90 30 1271 50
EIA 6 1/8" Low-loss copper Copper 50 155.6 6.13 151.92 5.98 66 2.60 64.1 2.52 0.6 99.8 Kw dB/100m 154 0.20 109 0.25 77 0.36 63 0.44 54 0.51 ND 40 2620 65
DIN 100/230 Low-loss copper Aluminium 50 235 9.25 230 9.06 100 3.94 98 3.86 0.4 99.8 Kw dB/100m 340 0.10 240 0.15 180 0.20 42 5828 110
1 +
0.7 E E :=
rf
SF 2
pk
:=
(Erf )2
Z
o
Pk=Peak power D=Outer conductor (in) =Air density (1 standard atmosphere) Z0= Line Impedance SF=1.4 to 2 d=Inner conductor (in) Ep= Peak voltage (V)
Accessories / Accesorios
Rigid Line / Lnea Rgida
Unit 7/16 7/8" 1" 5/8 LR-02-4 LR-038-2 LR-038-4 LR-05-4 LR-036-2 T-92-3 T-92-2 LR-038-2T LR-036-4 T-92-4 LR-038-4T LR-04-4 LR-06-4 LR-032-2 TR-1104 TR-3004 TR-3010 LR-032-4 TR-3104 TR-3110 T93-4 T70-4 TR-1704 TR-1710 T93-7 T70-7 T93-8 T70-8 T93-9 T70-9 T93-10 T70-10 T-92-6 13/30 3" 1/8 LR-02-7 LR-038-7 LR-05-7 LR-036-7 T-92-7 LR-038-7T LR-04-7 LR-06-7 LR-032-7 TR-3204 43/98 LR-02-8 LR-038-8 LR-05-8 LR-036-8 T-92-8 LR-038-8T LR-04-8 LR-06-8 LR-032-8 TR-2504 4"1/2 LR-02-9 LR-038-9 LR-05-9 LR-036-9 T92-9 LR-038-9T LR-04-9 LR-06-9 LR-032-9 6"1/8 LR-02-10 LR-038-10 LR-05-10 LR-036-10 T92-10 LR-038-10T LR-04-10 LR-06-10 LR-032-10
50 Ohm Rigid coaxial transmission line / Lnea Rgida 50 Ohm (5002) Brass swivel flange (with solder ring)/ Brida mvil soldada Field Flange unpresurized (camp-type) / Brida mvil corcelete ( 5005) Field Flange pressurized (soft solder type) / Brida fija soldada (5003) "O" ring, Silicone / Arandela de silicona Hardware set for flanges / Juego de Tornillera completo 90 degrees Elbows unflanged (with clamps) / Codos sin brida (5004) Straight adaptor (with inners inside) / Empalme (5006) Anchor insulator connector inner / Bellota (5003) Step Reducer 1st side Male to Type N(F)/ Reduccin de Macho a N(H) Step Reducer 1st side M to Type 7/16 DIN (F)/ Reduccin de Macho a DIN 7/16 (H) Fixed hanger / Punto de Subjecin Through wall anchor plate / Pasamuros
m Unit Unit Unit Unit Set Unit Unit Unit Unit Unit Unit Unit
Also connector for Air Cables with valve for pressurization. Add "-V" option to code. Disponibles Conectores para cables con aire con vlvula de presurizacin. Aadir "-V" al cdigo
2st Side
1"5/8 13/30(F) 13/30(M) 7/8" 7/16(M) 7/16(M)
1st side
6"1/8 EIA 13/30 (F) 13/30 (F) 1"5/8 EIA 7/16 (F)
2st Side
3"1/8 EIA N(F) 7/16 (F) 7/16 (M) N(F)
Code
TR-2922 TR-1604 TR-1610 TR-1911 TR-1004
Charges / Cargas
10W - N(M) 30W - 7/8 EIA 50W - 7/16 DIN Z-0522 Z-1201 Z-1017 100W - N(F) 250W - N(F) 500W 7/16 - DIN Z-0402 Z-0403 Z-1030
1 probe coupler 2xBNC / 1 Sonda 2xBNC 2 probe coupler 2xBNC/ 2 Sondas 2xBNC
CPL-4-1 CPL-4-2
Shadowed codes are manufactured upon request and non-stocked. Ask for other unmentioned accesories./ Cdigos sombreados se fabrican contra pedido y no se stockan. Pregunte por otros accesorios no mencionados..
Accesories / Accesorios
Pgina 33
www.moyano.com
Specifications are subject to change without notice.
C/ Caada N 53 28850 - Torrejn de Ardoz - Madrid SPAIN Tel. + (34) 91 661 07 50 Fax. + (34) 91 661 54 47