Beruflich Dokumente
Kultur Dokumente
V-8, 4-Stroke-Cycle-Diesel Displacement..................................... 34.53 L (2,107.15 in3) Rated Engine Speed....................................................1600 Bore....................................................... 170.0 mm (6.69 in) Stroke.................................................... 190.0 mm (7.48 in) Aspiration................................... Turbocharged-Aftercooled Governor.............................................................. Electronic Cooling System.......................................... Heat Exchanger Weight, Net Dry (approx.).................... 5,216 kg (11,499 lb) Refill Capacity Cooling System................................102.7 L (27.1 Gal) Lube Oil System............................... 219.6 L (58.0 gal) Oil Change Interval.................................................. 500 hrs Caterpillar Diesel Engine Oil 10W30 or 15W40 Standard Sump Oil Pan Rotation (from flywheel end).................... Counterclockwise Flywheel and Flywheel Housing.........................SAE NO. 0 Flywheel Teeth...............................................................151
11 February 2008
6:06 AM
3508B
MARINE PROPULSION
1015 mhp (1000 bhp) 746 bkW
PERFORMANCE CURVES
A-RATING - DM6910-01 Aftercooler Temperature 30 C (86 F)
Metric
Engine Power kW
Engine Speed rpm Engine Speed rpm Engine Power kW 746 746 746 321 189 142 Engine Torque Nm 4452 5088 5936 3065 2256 2086 BSFC g/kW-hr 201.2 198.1 196.3 213.4 231.8 241.7 Fuel Rate L/hr 179.0 176.1 174.5 81.6 52.2 40.9 Engine Speed rpm Engine Power kW Engine Torque Nm 4452 5088 5936 3571 2411 2160 BSFC g/kW-hr 201.2 198.1 195.6 215.5 234.8 243.9 Fuel Rate L/hr 179.0 176.1 174.0 96.1 56.5 42.7
Zone 1 Curve 1 1600 1400 1200 1000 800 650 Zone 2 Curve 2 1600 1400 1200 1000 800 650 Zone 3 Curve 3 1600 1400 1200 1000 800 650
Max Limit Curve 4 1600 746 1400 746 1200 746 1000 374 800 202 650 147 Prop Demand Curve P 1600 746 1400 499.8 1200 314.7 1000 182.1 800 93.3 650 50 1600 1400 1200 1000 800 650 746 746 746 374 202 147
4452 3409 2504 1739 1113 735 4452 5088 5936 3571 2411 2160
201.2 205 209.3 219.8 240.8 282.2 201.2 198.1 195.6 215.5 234.8 243.9
179.0 122.1 78.5 47.7 26.8 16.8 179.0 176.1 174.0 96.1 56.5 42.7
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
11 February 2008
6:06 AM
3508B
MARINE PROPULSION
1015 mhp (1000 bhp) 746 bkW
DIMENSIONS
Right Side
Front
Engine Dimensions (1) Length to Flywheel Housing 2117.3 mm (2) Width 1703.0 mm (3) Height 1821.0 mm Weight, Net Dry (approx) 5216 kg
Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2339499 ).
11 February 2008
6:06 AM
3508B
MARINE PROPULSION
1015 mhp (1000 bhp) 746 bkW
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of comparison with other manufacturer's engines. Actual engine performance may vary according to the particular application of the engine and operating conditions beyond Caterpillar's control. Power produced at the flywheel will be within standard tolerances up to 49 C (120 F) combustion air temperature measured at the air cleaner inlet, and fuel temperature up to 52 C (125F) measured at the fuel filter base. Power rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft power.
Performance No.: DM6910-01 Feature Code: 508DM41 U.S. Sourced 11823486 11 February 2008
2008 Caterpillar All rights reserved. Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos, "Caterpillar Yellow," and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.