Beruflich Dokumente
Kultur Dokumente
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
Standards published
New International Standards published between 01 April and 30 April 2011 * Available in English only ** French version of standard previously published in English only
Price group
TC 2
ISO 4017:2011
Fasteners
Hexagon head screws Product grades A and B E
ISO 4018:2011
ISO 7048:2011
ISO 8676:2011
Hexagon head screws with metric fine pitch thread Product grades A and B F
ISO 2702:2011
TC 6
ISO 10376:2011
TC 8
ISO 30006:2010
ISO 30007:2010
Ships and marine technology Measures to prevent asbestos emission and exposure during ship recycling
ISO 23269-3:2011
* Ships and marine technology Breathing apparatus for ships Part 3: Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes
TC 17
ISO 9444-2:2009
Steel
* Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate
ISO 9328-1:2011
* Steel flat products for pressure purposes Technical delivery conditions Part 1: General requirements
ISO 9328-2:2011
* Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated temperature properties
ISO 9328-3:2011
* Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized
ISO 9328-4:2011
* Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties
ISO 9328-5:2011
* Steel flat products for pressure purposes Technical delivery conditions Part 5: Weldable fine grain steels, thermomechanically rolled
ISO 9328-6:2011
* Steel flat products for pressure purposes Technical delivery conditions Part 6: Weldable fine grain steels, quenched and tempered
ISO 9328-7:2011
* Steel flat products for pressure purposes Technical delivery conditions Part 7: Stainless steels
ISO 20805:2011
* Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
TC 20
ISO 11893:2011
ISO 27026:2011
TC 21
ISO 16852:2008
Flame arresters Performance requirements, test methods and limits for use T
TC 22
ISO 13043:2011
Road vehicles
* Road vehicles Refrigerant systems used in mobile air conditioning systems (MAC) Safety requirements
ISO 15031-5:2011
* Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 5: Emissions-related diagnostic services
XB
ISO 7401:2011
* Road vehicles Lateral transient response test methods Open-loop test methods L
TC 23
ISO 11783-5:2011
ISO 1178313:2011
Tractors and machinery for agriculture and forestry Serial control and communications data network Part 13: File server
TC 28
ISO 20884:2011
TC 29
ISO 3860:2011
Small tools
Bore cutters with key drive Form milling cutters with constant profile B
ISO 1174-1:2011
Assembly tools for screws and nuts Driving squares Part 1: Driving squares for hand socket tools
ISO 3315:2011
Assembly tools for screws and nuts Driving parts for hand-operated square drive socket wrenches Dimensions and tests
TC 31
ISO 4250-3:2011
TC 34
ISO 16050:2003
Food products
Foodstuffs Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products High-performance liquid chromatographic method
ISO 3720:2011
ISO 11287:2011
TC 35
ISO 29601:2011
TC 37
ISO 10241-1:2011
TC 44
ISO 12153:2011
ISO 18275:2011
Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification
TC 46
ISO 16175-2:2011
TC 58
ISO 113631:2010/Cor 1:2011
Gas cylinders
Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications Technical Corrigendum 1
free
TC 60
ISO/TR 22849:2011
Gears
* Design recommendations for bevel gears R
TC 61
ISO 10927:2011
Plastics
Plastics Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDITOF-MS) * Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:2011
ISO 294-5:2011
Plastics Injection moulding of test specimens of thermoplastic materials Part 5: Preparation of standard specimens for investigating anisotropy
TC 67
TC 89
ISO 10033-1:2011
Wood-based panels
* Laminated Veneer Lumber (LVL) Bonding quality Part 1: Test methods J
ISO 10033-2:2011
TC 94
ISO 27065:2011
TC 106
ISO 21671:2006/Amd 1:2011
Dentistry
Dentistry Rotary polishers Amendment 1 XZ
TC 108
ISO 18437-5:2011
ISO 17359:2011
ISO 29821-1:2011
TC 115
ISO 9905:1994/Amd 1:2011 ISO 9908:1993/Amd 1:2011
Pumps
Technical specifications for centrifugal pumps Class I Amendment 1 XZ
TC 118
ISO 2892710:2011
TC 121
ISO 80601-212:2011
TC 123
Plain bearings
ISO 4384-2:2011
TC 131
ISO 16589-1:2011
ISO 16589-3:2011
* Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 3: Storage, handling and installation
ISO 16589-4:2011
* Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 4: Performance test procedures
ISO 16589-5:2011
* Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 5: Identification of visual imperfections
TC 138
ISO 112963:2009/Cor 1:2011
free
Multilayer piping systems for hot and cold water installations inside buildings Part 2: Pipes Amendment 1
XZ
TC 145
ISO 3864-1:2011
Graphical symbols
* Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
TC 146
ISO 25139:2011
Air quality
* Stationary source emissions Manual method for the determination of the methane concentration using gas chromatography
TC 150
ISO 12891-1:2011
TC 164
ISO 1352:2011
TC 172
ISO 14997:2011
ISO 8038:2011
ISO 8255-1:2011
* Microscopes Cover glasses Part 1: Dimensional tolerances, thickness and optical properties
TC 184
ISO 10303203:2011
XJ
ISO 10303210:2011
XJ
TC 190
ISO 23753-1:2005
Soil quality
Soil quality Determination of dehydrogenase activity in soils Part 1: Method using triphenyltetrazolium chloride (TTC)
ISO 23753-2:2005
Soil quality Determination of dehydrogenase activity in soils Part 2: Method using iodotetrazolium chloride (INT)
TC 198
ISO 13408-2:2003
ISO 13408-3:2006
ISO 13408-4:2005
ISO 13408-6:2005
ISO 15883-6:2011
Washer-disinfectors Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment
TC 204
ISO/TS 131401:2011
ISO/TS 131431:2011
* Electronic fee collection Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 Part 1: Test suite structure and test purposes
ISO/TS 175753:2011
* Electronic fee collection Application interface definition for autonomous systems Part 3: Context data
ISO/TS 175754:2011
* Electronic fee collection Application interface definition for autonomous systems Part 4: Roaming
TC 207
Environmental management
ISO 14066:2011
Greenhouse gases Competence requirements for greenhouse gas validation teams and verification teams
TC 213
ISO 14253-2:2011
ISO 14253-3:2011
TC 215
ISO 18308:2011
Health informatics
Health informatics Requirements for an electronic health record architecture M
TMB
ISO/IEC 8007934:2011
JTC 1
ISO/IEC 200001:2011
Information technology
* Information technology Service management Part 1: Service management system requirements
ISO/IEC 144433:2011
* Identification cards Contactless integrated circuit cards Proximity cards Part 3: Initialization and anticollision
ISO/IEC 12862:2011
* Information technology 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
XD
ISO/IEC 29103:2011
* Information technology Office equipment Colour photo test pages for measurement of ink cartridge yield for colour photo printing
* Information technology Generic coding of moving pictures and associated audio information: Systems Part 1: Amendment 3: Transport of scalable video over Rec. ITU-T H.222.0 | ISO/IEC 13818-1 Technical Corrigendum 1 * Information technology Generic coding of moving pictures and associated audio information: Systems Part 1: Technical Corrigendum 3: Corrections concerning VBV buffer size, semantics of splice_type and removal rate from transport buffer for ITU-T H.264 ISO/IEC 14496-10 advanced video coding * Information technology Coding of audio-visual objects Part 5: Reference software Amendment 28: Reference software for LASeR adaptation tools
free
free
XZ
* Information technology Media context and control Part 6: Common types and tools V
ISO/IEC 197623:2008
Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID)
ISO/IEC 13249-
3:2011
Part 3: Spatial
XL
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2
ISO 885:2000 ISO 6157-2:1995
Fasteners
(reconfirmed) (reconfirmed)
TC 6
ISO 17812:2007
TC 17
ISO 7788:1985 ISO 6305-3:1983 ISO 6305-4:1985
Steel
(reconfirmed) (reconfirmed) (reconfirmed)
TC 20
ISO 2315:1980 ISO 8056-1:1985
TC 22
ISO 13837:2008
Road vehicles
TC 28
ISO 6743-10:1989 ISO 6743-11:1990 ISO 6743-12:1989 ISO 6743-14:1994 ISO 6743-15:2007 ISO 8216-2:1986 ISO 24254:2007
(reconfirmed)
TC 29
Small tools
ISO 297:1988 ISO 2336-2:2006 ISO 4875-1:2006 ISO 4875-2:2006 ISO 7388-1:2007 ISO 7388-2:2007 ISO 11054:2006 ISO 13399-1:2006
(reconfirmed)
TC 34
ISO 6092:1980 ISO 7586:1985 ISO 9233-1:2007 ISO 9233-2:2007 ISO 5510:1984 ISO 6490-1:1985 ISO 6493:2000 ISO 6866:1985 ISO 6867:2000 ISO 6869:2000 ISO 7485:2000 ISO 14181:2000 ISO 14565:2000
Food products
(reconfirmed) (reconfirmed)
TC 35
ISO 3251:2008 ISO 3681:1996 ISO 6744-1:1999 ISO 6744-2:1999 ISO 6744-3:1999 ISO 6744-4:1999 ISO 11668:1997 ISO 13885-1:2008 ISO 14446:1999 ISO 15234:1999 ISO 15715:2003
(reconfirmed) (reconfirmed)
(reconfirmed)
TC 43
ISO 1680:1999 ISO 3743-2:1994 ISO 4869-3:2007 ISO 7196:1995 ISO 8297:1994 ISO 11203:1995 ISO 11205:2003 ISO 13475-1:1999
Acoustics
(reconfirmed) (reconfirmed)
(reconfirmed) (reconfirmed)
(reconfirmed)
TC 44
ISO 9692-3:2000
TC 51
ISO 12777-1:1994
TC 52
ISO 10193:2000 ISO 90-3:2000 ISO 10154:1991
TC 54
ISO 17412:2007 ISO 19332:2007
Essential oils
TC 61
ISO 4608:1998 ISO 8873-1:2006
Plastics
TC 70
ISO 4548-12:2000
TC 72
ISO 26243:2007
TC 85
ISO 11933-3:1998
TC 92
ISO/TR 13387-1:1999 ISO/TR 13387-2:1999
Fire safety
(reconfirmed) (reconfirmed)
ISO/TR 13387-3:1999 ISO/TR 13387-4:1999 ISO/TR 13387-5:1999 ISO/TR 13387-6:1999 ISO/TR 13387-7:1999 ISO/TR 13387-8:1999
TC 94
ISO 12127-2:2007
TC 106
ISO 1564:1995 ISO 4823:2000 ISO 7491:2000
Dentistry
(reconfirmed) (reconfirmed) (reconfirmed)
TC 108
ISO 2017-2:2007
TC 121
ISO 7396-2:2007
TC 123
ISO 3547-5:2007 ISO 3547-6:2007 ISO 3547-7:2007
Plain bearings
TC 147
ISO 9696:2007 ISO 10703:2007 ISO/TR 11905-2:1997 ISO/TS 20612:2007 ISO 11348-1:2007 ISO 11348-2:2007 ISO 11348-3:2007 ISO 15088:2007 ISO 23893-1:2007 ISO/TS 23893-2:2007
Water quality
(reconfirmed)
TC 211
ISO 19105:2000
Geographic information/Geomatics
(reconfirmed)
ISO 19132:2007
TC 217
ISO 22716:2007
Cosmetics
JTC 1
ISO/IEC 15051:2003 ISO/IEC 14598-2:2000 ISO/IEC 14496-11:2005 ISO/IEC 15444-9:2005
Information technology
Standards withdrawn
Period from 01 April to 30 April 2011
TC 37
ISO 10241:1992
TC 108
ISO 13380:2002
TC 118
ISO 8662-2:1992 ISO 8662-2:1992/Amd 1:1999 ISO 8662-3:1992 ISO 8662-3:1992/Amd 1:1999 ISO 8662-5:1992 ISO 8662-5:1992/Amd 1:1999
TC 172
ISO 8038-1:1997 ISO 8038-2:2001
TC 213
ISO/TS 14253-2:1999 ISO/TS 14253-3:2002
TC 215
ISO/TS 18308:2004
Health informatics
(replaced by ISO 18308:2011)