Beruflich Dokumente
Kultur Dokumente
b. Use air syringe to gently flow the material into the interproximal and gingival areas of the tooth. Allow the material to self-level. c. Apply an additional thin layer if necessary. See Tips section. 2. Cure LUMIBRITE Bleach-Free Whitening with Sapphire Supreme Plasma Arc Curing Light for 5 seconds per tip width. Note: If using a different light, determine the correct exposure time required to cure LUMIBRITE Bleach-Free Whitening material. 3. Use CeriSaw to open contacts, one tooth at a time. 4. Repeat all steps for the next tooth to be whitened. Step 3 GLOSS 1. Dispense LUMIBRITE Bleach-Free Whitening Gloss from syringe into dappen dish. Use brushes provided to apply in a thin layer. 2. Cure LUMIBRITE Bleach-Free Whitening Gloss with Sapphire Supreme PAC Light for 5 seconds per tip width. 3. Use CeriSaw to open contacts, one tooth at a time. 4. Finish with polishing disc or a 12 fluted carbide bur where necessary, including margins. Patient After Care: To help prolong whitening results, direct the patient to follow these instructions. If care is taken, whitening can last up to 6 months.* 1. Instruct the patient to avoid dark liquids and foods for 24 hours. 2. Be aware that certain hygiene tools could cause chipping. Therefore, remind the hygienist that the patient has undergone the LUMIBRITE Bleach-Free Whitening procedure at the time of recall appointments. 3. If a patient has a night guard, it is recommended that the night guard be readjusted to allow room for the added LUMIBRITE Bleach-Free Whitening material. 4. If a patient has a removable appliance, such as a partial, readjust it at the time of whitening.* INSTRUCTIONS FOR TOUCH-UP: 1. Remove existing coat of Whitener from the tooth to be re-treated, one tooth at a time, using a slow handpiece with a fine or medium Soflex disc. 2. Follow the steps described for application of the LUMIBRITE Bleach-Free Whitening (Step 2-WHITEN). Federal law restricts this device to sale by or on the order of a Dentist. STORAGE Store at room temperature away from direct light. 70 F (23 C) SUPPLEMENTAL PRODUCTS: Description Product Number CeriSaw Anterior kit with strips ...................................031336500 Cheek retractors Small 10 pc ....................................................................040316150 Medium 10 pc................................................................040319150 Large 10 pc ....................................................................040317150
Den-Mat Holdings, LLC. ISO 9001 Certified. Santa Maria, CA 93455 U.S.A.
2009 Den-Mat Holdings, LLC. World Rights Reserved. 752391620 11/09KS