Beruflich Dokumente
Kultur Dokumente
Sp
ci e
al
it d
on i
Finally, more than 7.600 end-user terminals are connected to the new TETRA network. A peculiarity for radio network planners is the network design in Shaybah, one of the worlds major crude oil and gas producing regions. It is situated in the south- east of Saudi Arabia and borders on the United Arab Emirates (UAE). The whole region is made up of solidified desert and sand dunes. The production sites are located 70 metres above sea level in salt flats, so-called Sabkhas forming along arid coastlines. They are all surrounded by dunes which are between 180 and 200 metres
high. 95 % of the network coverage for this area will now be provided by base stations and outdoor repeaters. Several drive tests at an outdoor temperature of 50 degrees Celsius were necessary in order to guarantee meticulous network planning. Shaybah is one of the hottest desert areas in Saudi Arabia. Saudi Aramco is a state-owned oil company of the Kingdom of Saudi Arabia. The Saudi Aramco story began in May 1933 with signing a concession agreement between the government of Saudi Arabia and the Standard Oil Company of California (Socal). The company name was
changed to Arabian American Oil Company (Aramco) in 1944. Between 1973 and 1980, the Saudi Arabian government acquired an economic interest in Aramcos operations in stages. In 1980, essentially all of Aramcos assets were transferred to the government. In 2000, Saudi Aramco was declared for the eleventh time the largest crude oil production company in the world by the trade journal Petroleum Intelligence Weekly.
02
Saudi Aramco is looking for a superviLS telcom carried out a TETRA project sory control and data acquisition for Sasol at their Secunda facilities. Sasol is an integrated energy and (SCADA) communication system to chemicals company. They use coal, oil gather and process data from its offand gas to produce liquid fuels, fuel shore oil producing platforms located components and chemicals. In a in the Berri Field in the Northern Arahazardous environment of chemical bian Gulf (Kingdom of Saudi Arabia). production with high operational The system will connect the SCADA costs, secure and reliable communica- host located onshore with several tion between the different production remote terminal units (RTU) on the oil facilities and the coal mining sites is producing platforms using UHF narindispensable. It is obvious that in row band radio technology working in such an environment the accuracy of the 330-350 MHz range. the network design is particularly criti- LS telcom, invited by Worley Parsons cal. LS telcom was responsible for the Petrocon Consortium, will be conRF planning tasks which included the ducting the radio frequency planning microwave link and TETRA planning. for this system. The project included the replacement The scope of the study is to determine of the old analogue two way radio sys- how many onshore base stations are tem by the new TETRA system and the required to serve all offshore remote planning of a new TETRA network pro- radios. In a second stage the technical viding in addition to the secure radio configuration for the base stations communication at the main plant and and the RTUs will be planned. Finally, between the different coal mines. to ensure interference free operation The network is now installed and of the system, on-site measurements in operation. As the planning will also be performed. achieved the required accuracy, *SCADA stands for supervisory control LS telcom was also selected for the and data acquisition. It generally refers TETRA network planning of other pro- to industrial control systems: computer duction sites in South Africa. systems that monitor and control industrial, infrastructure, or facility-based processes. You can find more information at: http://en.wikipedia.org/wiki/SCADA.
The Saudi Arabian Oil Company (SAUDI ARAMCO) currently uses UHF radio links to provide wireless connectivity for SCADA remote terminal units (RTUs) installed at locations like Oil and Water injection wellheads and Cathodic Protection Stations along pipelines. For selected links the UHF links shall be migrated into the existing TETRA mobile radio network. In a first step the migration is planned for 560 SCADA systems and 560 CP systems. In the frame of this project LS telcom AG has been selected to investigate various aspects of SCADA over TETRA solutions like system reliability, system load and protocol performance. Also an evaluation of different solutions and technologies for SCADA over TETRA on the market is done. The results of the studies will build the base for a detailed functional system description of a SCADA over TETRA solution that will allow SAUDI ARAMCO to make the appropriate decisions and manufacturer selection to fulfill the project requirements.
Network Planning for Authorities and Emergency Forces in the Federal State of Schleswig-Holstein, Germany
LS telcom plans the digital mobile radio access network for the police in the federal state of Schleswig-Holstein in Germany. The project includes the set up of the network design, the specification of tender requirements and bid evaluation. Project management and documentation during the system construction phase is also under LS telcoms responsibility. LS telcom radio experts have designed the complete access network, connecting all existing TETRA base stations. This will essentially be done through microwave link technology. The planning includes necessary site survey tests, the verification of line of sight and the acceptance test of the installed sites.
LS telcom plans TETRA Network Infrastructure for the Underground Rheinbahn of the German City of Dsseldorf
On the occasion of the switchover from analogue to digital radio, LS telcom is currently planning the complete new integrated antenna system for the underground part of the Metropolitans Rheinbahn. First of all, the actual situation was analysed, preliminary studies were evaluated and exact requirements were defined. A detailed action plan was then developed in a step-by-step approach in coordination with all participating authorities and other professional consultants. This plan together with a cost budget calculation, which was set up in parallel was the basis for the preparations of the tender process. LS telcom assisted the bid evaluation and is now supporting the quality and cost control of the network installation.
03
Vendor independent and experienced, LS telcom assists you in any kind of coverage project:
System Design, Planning, Analysis and Optimisation: Distributed antenna systems Leaky cable Cell enhancer RF over fibre System Implementation: Procurement process Project management and documentation Commissioning Measurements LS telcom & iBwave joined forces to offer in-building planning for the public safety sector. iBwave, the international provider of in-building wireless software solutions, has signed a reseller agreement that will enable LS telcom a leading supplier of radio engineering services and system solutions for high-end wireless network planning - to distribute iBwaves expertise and products.
Planning Tool for In-Building Network Design Stay in control of your project
With iBwave Design*, RF engineers can automate in-building wireless network design and eliminate guesswork, to bring strong, reliable wireless communications indoors. It helps you design for TETRA, 3G and LTE in high-volume, indoor and near-building locations. And since small cells are increasingly used to handle capacity requirements, inbuilding solutions are becoming more critical and complex, making it even more essential to work with a tool that provides superior designs. iBwave Design takes you through network planning, design, costing, validation, documentation and reporting, delivering top performance, reducing capital expenditure and increasing your productivity. It provides the right mix of usability, control, and flexibility so that you can simulate real project situations, accurately predict coverage before deployment or quickly change how you have configured your design to see if there is a more cost-effective way to build it out. You can be confident in your streamlined designs, cutting antennas without compromising coverage and leveraging outdoor signals.
04
PMRmobil 2012 Nrnberg 22nd May, Hannover 23rd May, Cologne 24th May PMRExpo 2012 Cologne, Germany 27th - 29th Nov 2012
The TETRA & Critical Communications Association was established in December 1994 to create a forum which could act on behalf of all interested parties, representing users, manufacturers, application providers, integrators, operators, test houses and telecom agencies. Today, the TETRA & Critical Communications Association represents more than 150 organisations from all continents of the world. PMeV (Verband Professioneller Mobilfunk e. V.), the German association for public mobile radio
The PMeV pursues integrated approaches to the use of standardised technologies for the needs of PMR users. In collaboration with the appropriate standardisation bodies and in close consultation with regulatory authorities and users the PMeV is a proactive contributor to the standardisation and further development of PMR services.
Imprint
2012 for all photos and texts: LS telcom Group if not stated otherwise
Info@LStelcom.com
www.LStelcom.com