Beruflich Dokumente
Kultur Dokumente
Page 1 of 4
2. Multimode fiber patch cables: Multimode fiber optic patch cables use 62.5/125 micron or 50/125 micron bulk multimode fiber cable and terminated with multimode fiber optic connectors at both ends. Multimode fiber optic cable jacket color is usually orange. Here is the explanation of what is multimode and multimode fiber.
http://www.fiberoptics4sale.com/Merchant2/fiber-optic-patch-cables.php
2/18/2009
Fiber Optic Patch Cables Tutorial - Fiber Optics For Sale Co.
Page 2 of 4
3. 10gig multimode fiber optic patch cables: 10Gig multimode fibers are specially designed 50/125 micron fiber optimized for 850nm VCSEL laser based 10Gig Ethernet. They are backward compatible with existing network equipment and provide close to three times the bandwidth of traditional 62.5/125 multimode fibers. 10 Gigabit is rated for distances up to 300 meters using 850nm Vertical Cavity Surface Emitting Lasers (VCSEL). 10Gig fiber optic cable jacket is usually aqua.
2. Duplex fiber optic patch cables: Duplex fiber patch cable has two fibers and two connectors on each end. Each fiber is marked A or B or different colored connector boots are used to mark polarity.
http://www.fiberoptics4sale.com/Merchant2/fiber-optic-patch-cables.php
2/18/2009
Fiber Optic Patch Cables Tutorial - Fiber Optics For Sale Co.
Page 3 of 4
3. Ribbon fan-out cable assembly: For ribbon fan-out cable assembly, one end is ribbon fiber with multi fibers and one ribbon fiber connector such as MTP connector (12 fibers), the other end is multi simplex fiber cables with connectors such as ST, SC, LC, etc.
Connector Types:
check out this fiber optic connector tutorial for all connector types available
1. Same connector type fiber patch cable: This fiber optic patch cable has the same type of connector on both ends, such as ST, SC, LC, FC, etc. 2. Hybrid fiber optic patch cables: This fiber optic patch cable has different connectors on each end. One end can be SC and the other end can be LC, ST, FC, etc.
Connector Polishing Types: Fiber optic connectors are designed and polished to different
shapes to minimize back reflection. This is particularly important in single mode applications. Typical back reflection grades are -30dB, -40dB, -50dB and -60dB. Refer to this connector fiber polish types document for more information. 1. PC (Physical Contact): Typical back reflection <-40dB, for single mode and multimode applications.
2. UPC (Ultra Physical Contac t): Typical back reflection <-50dB, for single mode
http://www.fiberoptics4sale.com/Merchant2/fiber-optic-patch-cables.php
2/18/2009
Fiber Optic Patch Cables Tutorial - Fiber Optics For Sale Co.
Page 4 of 4
applications. 3. APC (Angled Physical Contact): Typical back reflection <-60dB, for single mode applications.
Fiber Cable Sizes: You can choose your fiber cable jacket size for your particular application.
1. 2. 3. 4. 5. 250um bare fiber 900um tight buffer fiber 1.6mm fiber optic cable 2.0mm fiber optic cable 3.0mm fiber optic cable
Stocking fiber optic patch cables available from Fiber Optics For Sale Co.
1. 2. 3. 4. 5. 6. 7. LC ST SC and SC/APC FC and FC/APC MTRJ E2000 VF-45
http://www.fiberoptics4sale.com/Merchant2/fiber-optic-patch-cables.php
2/18/2009