Beruflich Dokumente
Kultur Dokumente
No. 154576 Date: August 2004 Product LINAX A330 Videographic Recorder Manual 153495
LINAX A330 Advanced Math and Logic Software Service Pack Serial Number and Security Code
Serial Number:
Introduction
This information publication describes the procedure for enabling the Advanced Math and Logic software feature on LINAX A330 recorders. The Advanced Software Service Pack, 154443, includes the following items:
Description Advanced Software Options Supplement Information Publication A330 Advanced Math and Logic Software Service Pack Part No. 153750 154576 Qty 1 1
Security Code:
Tools Required
Medium, flat-bladed screwdriver
Continued
1 Remove tamper-proof
seal (if fitted)
the recorder and unscrew the jacking screw securing the instrument to the case
and secure with the jacking screw the Operator level to display
Note. The red switch is for factory use only. Ensure it remains in the position closest to the rear of the recorder.
Configuration
Commissioning
Use the
and
tab
Continued
Ensure that the Serial Number is the same as the one listed on the front of this Information Publication (see Notes 1 and 2 below)
Use the , and keys to open the 'Enter security code' keyboard
Use the , , , and keys to enter the security code from the front of this Information Publication into the data entry field
Highlight the 'OK' button and press the key to accept the Security Code and close the keyboard
Check that the 'Math and Logic Option' field reads 'Enabled' see Note 3 below
Notes. 1 If the Serial Number does not match that given on the front of this Information Publication, contact the Company. 2 If the Serial Number field is blank, enter the Serial Number given on the front of this Information Publication. 3 If the 'Maths and Logic Option' field does not read Enabled, repeat steps 1 to 5 ensuring that the Security Code is entered correctly. If the fault persists, contact the Company.
5) Isolate the power supply to the recorder. 6) Remove the recorder from its case see Fig. 3.1. 7) Push the yellow security switch forwards to protect access to the Configuration Level see Fig. 3.1. Note. Ensure that the red switch remains in the rearwards position. 8) Refit the recorder to the case see Fig 3.1. 9) Restore the power supply to the recorder.
The Companys policy is one of continuous product improvement and the right is reserved to modify the information contained herein without notice. Printed in the EU (01.05) CAMILLE BAUER 2005
CAMILLE BAUER AG Aargauerstrasse 7 CH-5610 Wohlen Switzerland Phone: +41 56 618 21 11 Fax: +41 56 618 24 58 www.camillebauer.com
154576
Issue 1