Sie sind auf Seite 1von 6

Polyethylene

for injection moulding and compounding European product range

Total Petrochemicals: your partner for injection moulding and compounding

Total Petrochemicals manufactures polyethylenes at ve production sites around the world: Antwerp and Feluy in Belgium, Gonfreville and Carling in France and Bayport in the United States. Production capacities of these sites on both sides of the Atlantic together account for more than 2 million tonnes. Total Petrochemicals product portfolio in polyethylene includes a wide range of low density resins (LDPE), medium density resins (MDPE), high density resins (HDPE), ethylene vinyl acetate copolymers (EVA) and second generation metallocene medium and high density resins (mMDPE and mHDPE). This extensive product range is used in a broad area of applications : blow moulded parts, pipes, sheets and ims, cable jacketing, extrusion coating and injection moulding. Technical service and development for Europe is provided by Total Petrochemicals Research Feluy (Belgium). As one of the major players in the European polyethylene market, Total Petrochemicals can supply the right product tu suit various injection moulding and compounding market segments. Low density resins (LDPE), medium density resins (MDPE) and ethylene vinyl acetate copolymers (EVA) have become the materials of choice in the development of master batches and for a wide variety of injection moulding applications such as shoe soles, caps and closures and household articles. A customer-oriented organisation and innovative product range, offered through a dedicated and focussed sales force and technical service team, makes Total Petrochemicals the ideal partner for your injection moulding and compouding business.

Total Petrochemicals at a glance


Total Petrochemicals, the petrochemicals business group of Total, encompasses the base petrochemical products produced by steam crackers and selected renery conversion installations olens (ethylene and propylene), C4 fractions and aromatics (benzene, toluene, xylenes and styrene) and the consumer polymers derived from them (polyethylene, polypropylene, polystyrene and elastomers). Total Petrochemicals employs 7,500 people in Europe, the United States, the Middle East and Asia. Its products are used in many domestic and industrial markets, including packaging, construction and automotive.

Low Density Polyethylene (LDPE) for injection moulding and compounding


Characteristics
Density Melt ow rate 2.16 kg 190C g/10 min EN ISO 1133 ASTM D 1238 AOX Tensile strength at break MPa EN ISO 527-2 ASTM D 638 Elongation at break % EN ISO 527-2 ASTM D 638 Elasticity modulus MPa EN ISO 527-2 ASTM D 638

Main properties
Vicat temperature C ISO 306 EN ISO 11357 ASTM D 1525 (10C/min) Melting temperature C Shore hardness after 15 D ISO 868 ASTM D 2240 DIN 53505 Processing temperature C Shrinkage

Typical applications Easy ow injection moulding

Additives

Caps and closures

Grade

Process

Flexible moulding

g/cm3 ISO 1183 ASTM D 1505 DIN 53479

C EN ISO 306 ASTM D 955

Household articles

Masterbatches

1020 FN 24 LD 0304 1070 MN 18 C 1200 MN 18 C 1700 MN 18 C


(AOX): antioxidant

tubular autoclave autoclave autoclave autoclave

0.922 0.924 0.918 0.918 0.918

2.1 4 7.5 22 70

no no no no no

10 13 12 8 7

550 550 450 200 120

210 250 170 160 150

94 94 88 85 84

112 112 108 106 105

52 53 51 51 50

200 - 260 200 - 260 190 - 250 160 - 240 160 - 220

1-3 1-3 1-3 2-4 2-4

X X X

X X X X X X X

X X X

X X

All above mentioned grades comply with the regulations of most countries governing the contact of plastics with foodstuffs. Individual certicates can be obtained from Total Petrochemicals Research Feluy.

Information contained in this publication is true and accurate at the time of publication and to the best of our knowledge. The nominal values stated herein are obtained using laboratory test specimens. Before using one of the products mentioned herein, customers and other users should take all care in determining the suitability of such product for the intended use. Unless specically indicated, the products mentioned herein are not suitable for applications in the pharmaceutical or medical sector. The Companies within Total Petrochemicals do not accept any liability whatsoever arising from the use of this information or the use, application or processing of any product described herein. No information contained in this publication can be considered as a suggestion to infringe patents. The Companies disclaim any liability that may be claimed for infringement or alleged infringement of patents.

www.enterprise-communication.be

Handles

Toys

10-2004

F5809

Medium Density Polyethylene (MDPE) for injection moulding and compounding


Characteristics
Density Melt ow rate 2.16 kg 190C g/10 min EN ISO 1133 ASTM D 1238 AOX Tensile strength at break MPa EN ISO 527-2 ASTM D 638 Elongation at break % EN ISO 527-2 ASTM D 638 ASTM D 790 Flexural modulus 0.40% MPa

Main properties
Vicat temperature C ISO 306 EN ISO 11357 ASTM D 1525 (10C/min) Melting temperature C Shore hardness after 15 D ISO 868 ASTM D 2240 DIN 53505 Processing temperature C -

Additives

Grade

Process

g/cm3 ISO 1183 ASTM D 1505 DIN 53479

Typical applications

HF 513
(AOX): antioxidant

slurry

0.934

0.15

yes

33

790

700

113

125

62

210 - 230

Masterbatches

All above mentioned grades comply with the regulations of most countries governing the contact of plastics with foodstuffs. Individual certicates can be obtained from Total Petrochemicals Research Feluy.

Information contained in this publication is true and accurate at the time of publication and to the best of our knowledge. The nominal values stated herein are obtained using laboratory test specimens. Before using one of the products mentioned herein, customers and other users should take all care in determining the suitability of such product for the intended use. Unless specically indicated, the products mentioned herein are not suitable for applications in the pharmaceutical or medical sector. The Companies within Total Petrochemicals do not accept any liability whatsoever arising from the use of this information or the use, application or processing of any product described herein. No information contained in this publication can be considered as a suggestion to infringe patents. The Companies disclaim any liability that may be claimed for infringement or alleged infringement of patents.

www.enterprise-communication.be

10-2004

F5809

Ethylene Vinyl-Acetate copolymers (EVA) for injection moulding and compounding


Characteristics
Melt ow rate 2.16 kg 190C g/10 min EN ISO 1133 Internal method ASTM D 1238 AOX Tensile strength at break MPa EN ISO 527-2 ASTM D 638 Elongation at break % EN ISO 527-2 ASTM D 638 Elasticity modulus MPa EN ISO 527-2 ASTM D 638

Main properties
Vicat temperature C ISO 306 EN ISO 11357 ASTM D 1525 (10C/min) DIN 53505 ASTM D 2240 ASTM D 955 Melting temperature C Shore hardness after 15 A D Processing temperature C Shrinkage

Typical applications

% VA

Additives

Anti-vibration rail pads

Caps and closures

Masterbatches X X X X X

Grade

Process

C EN ISO 306

Tubes and proles

Shoe soles

ISO 868

1005 VN 3 1020 VN 3 1090 VN 3 1005 VN 4 1040 VN 4 1005 VN 5 1020 VN 5


(AOX): antioxidant

tubular tubular tubular tubular tubular tubular tubular

8.2 9 9 14 14 17 17.5

0.4 3 9 0.75 4.5 0.75 2

yes yes yes yes yes yes yes

20 17 13 24 19 27 24

800 750 720 800 750 850 800

115 100 95 75 75 50 50

82 74 71 72 68 66 61

102 99 96 95 92 90 87

96 94 93 93 92 92 90

48 38 35 36 33 34 32

170 - 190 170 - 200 130 - 150 160 - 180 160 - 190 160 - 180 150 - 180

<2 <2 <2 <2 <2 <2 <2 X X X X X X X X X

X X

X X

All above mentioned grades comply with the regulations of most countries governing the contact of plastics with foodstuffs. Individual certicates can be obtained from Total Petrochemicals Research Feluy.

Information contained in this publication is true and accurate at the time of publication and to the best of our knowledge. The nominal values stated herein are obtained using laboratory test specimens. Before using one of the products mentioned herein, customers and other users should take all care in determining the suitability of such product for the intended use. Unless specically indicated, the products mentioned herein are not suitable for applications in the pharmaceutical or medical sector. The Companies within Total Petrochemicals do not accept any liability whatsoever arising from the use of this information or the use, application or processing of any product described herein. No information contained in this publication can be considered as a suggestion to infringe patents. The Companies disclaim any liability that may be claimed for infringement or alleged infringement of patents.

www.enterprise-communication.be

Gaskets

Flippers

Toys

10-2004

F5809

Marketing and Sales


TOTAL PETROCHEMICALS a division of sa PetroFina nv rue de lIndustrie, 52, Nijverheidsstraat B-1040 Brussels - Belgium Phone : +32 (0) 2 288 91 11 Fax : +32 (0) 2 288 35 36

Research and Development


TOTAL PETROCHEMICALS RESEARCH FELUY sa Zone Industrielle C B-7181 Feluy - Belgium Phone : +32 (0) 2 288 40 05 Fax : +32 (0) 2 288 46 60
F5809 www.enterprise-communication.be 10-2004

Technical Assistance
TOTAL PETROCHEMICALS RESEARCH FELUY sa Zone Industrielle C B-7181 Feluy - Belgium Phone : +32 (0) 2 288 40 05 Fax : +32 (0) 2 288 46 60

) : polyethylene@total.com
: : www.totalpetrochemicals.com

Photos : Photo collection ATOFINA/Total Petrochemicals/Michel Clinckemaille/Enterprise Communication

Das könnte Ihnen auch gefallen