Beruflich Dokumente
Kultur Dokumente
Broadcast Storm Control Virtual LANs (VLANs) Multicast Filtering Spanning Tree Protocol (802.1D-1998) Rapid Spanning Tree Protocol (802.1w) Quality of Service (QoS) RMON Email Notification of Events Management Port Security Alert LED
For information about managing the software features of the Switch, refer to the SuperStack 3 Switch Management Interface Reference Guide on the CD-ROM that accompanies the Switch.
Management Folder Setup Alert Monitor System Folder Getting Started Console Control Management Telnet Unit Telnet Folder Connect
Unit Folder Alert NameLED Name Notepad Notepad
Alert Folder Create Modify Test Delete Summary Monitor Folder Modify Summary
Bridge Folder Address Database Broadcast Storm Control Link Aggregation Multicast Filter Spanning Tree
Modify Folder
Add Port Admin State LACP State partnerID Remove Port
Ethernet Folder History Setup Smart Autosensing Statistics Summary IP Folder Setup Device Folder User Network Folder Access
For detailed descriptions of the web interface operations and the command line interface (CLI) commands that you require to manage the Switch please refer to the Management Interface Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
Name Notepad History-1 Hour History-48 Hours Port Setup Summary Setup
Setup
Unit
Operation (Continued)
Physical Interface Ethernet History History-48 Hours Displays packet activity for all ports on a unit over the previous 48 hours. Physical Interface Ethernet Setup Physical Interface Ethernet Smart Autosensing Physical Interface Ethernet Statistics Physical Interface Ethernet Summary Protocol IP Setup Security Device User Modify Security Network Access Port Security System Console Setup System Control Initialize System Control Reboot System Control Software Upgrade System Getting Started System Management Alert Create System Management Alert Delete System Management Alert Modify System Management Alert Summary System Management Alert Test System Management Monitor Modify System Management Monitor Summary System Management Setup System Telnet Connect System Unit Alert LED System Unit Name System Unit Notepad Sets up single or multiple ethernet ports. Configures smart autosensing for the unit. Displays statistics for packet and error traffic on one or more ports. Displays summary information for the unit. Configures the IP information for the unit. Modifies the password of the current user. Sets the security mode of single or multiple ports on a unit. Configures the type, speed and flow of a console port. Initailizes the unit to factory default settings. Resets the unit. Upgrades the software on the unit. Guides you through the initial configuration of the unit. Creates and defines an email alert and its distribution. Deletes an existing email alert. Modifies an existing email alert and its distribution. Displays summary information for configured email alerts. Sends a test email alert. Sets up a device or port to be monitored for email alerts. Displays summary information for devices or ports on which monitoring is enabled. Changes information for the unit. Starts a Telnet session to the unit in a separate window. Displays the Alert LED configuration for the unit selected. Assigns a name to the unit. Opens a notepad for the unit.
To display sub-menus: At the Select menu option prompt, enter the name of the menu or menus. To display parent menus: At the Select menu option prompt, enter quit. To display the Top-level menu: Press the [Esc] key. To obtain help: At the Select menu option prompt, enter ?.
Address Database Menu add agingTime find remove summary Link Aggregation Menu detail modify summary Multicast Filter Menu igmp routerPort Port Menu detail lacpState stpCost stpFastStart summary Spanning Tree Menu stpDefaultPathCosts stpForwardDelay stpHelloTime stpMaxAge stpPriority stpState stpVersion
VLAN Menu create delete detail modify summary
Modify Menu addPort linkState partnerID removePort IGMP Menu queryMode snoopMode RouterPort Menu addPort autoDiscovery removePort summary
Bridge Menu addressDatabase broadcastStormControl linkAggregation multicastFilter port spanningTree summary vlan Top-level Menu bridge gettingStarted logout physicalInterface protocol security system trafficManagement
Ethernet Menu
detail flowControl portCapabilities portMode portState smartAutosense summary
Protocol Menu ip
IP Menu basicConfig initializeConfig interface ping route Device Menu access user Network Menu access Control Menu initialize reboot softwareUpgrade
Interface Menu
modify summary
Security Menu
Top-level Menu bridge gettingStarted feature logout physicalInterface protocol security system trafficManagement
device network
Management Menu alert contact location monitor name password remoteAccess snmp
Access Menu portSecurity Alert Menu addAddress create delete modify removeAddress summary test Monitor Menu modify summary SNMP Menu community get next set trap Trap Menu create delete modify summary Classifier Menu create delete detail modify summary Profile Menu addClassifier assign create delete detail listPorts modify removeClassifier summary Service Level Menu summary Traffic Queue Menu summary
Unit Menu
AlertLED select
For detailed descriptions of the web interface operations and the command line interface (CLI) commands that you require to manage the Switch please refer to the Management Interface Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
What does the Command do? Adds a statically configured address. Sets the bridge address aging time. Finds an address. Removes an address. Displays summary information on addresses. Enables or disables broadcast storm control. Displays detailed information on an aggregated link. Adds a port to an aggregated link. Enables or disables an aggregated link. Sets an aggregated link to connect to a specified partner unit. Removes a port from an aggregated link. Displays summary information on an aggregated link. Enables or disables IGMP query mode. Enables or disables IGMP Multicast learning. Adds a statically configured router port. Enables or disables router port auto discovery. Removes a router port. Displays summary information on a router port. Displays detailed information on a port. Enables or disables LACP on a port. Sets the Spanning Tree path cost parameter. Enables or disables Spanning Tree fast start. Displays summary information on a port. Sets the bridge Spanning Tree default path costs Sets the bridge Spanning Tree forward delay parameter. Sets the bridge Spanning Tree hello time parameter. Sets the bridge Spanning Tree maximum age parameter. Sets the bridge Spanning Tree priority parameter. Enables or disables Spanning Tree on a bridge. Selects the version of Spanning Tree to run on the bridge Displays summary information on the bridge. Creates a VLAN. Deletes a VLAN. Displays detailed information on a VLAN. Adds a port to a VLAN. Names a VLAN.
8
Command (Continued)
bridge vlan modify removePort bridge vlan summary gettingStarted logout physicalInterface ethernet detail physicalInterface ethernet flowControl physicalInterface ethernet portCapabilities physicalInterface ethernet portMode physicalInterface ethernet portState physicalInterface ethernet smartAutosense physicalInterface ethernet summary protocol ip basicConfig protocol ip initializeConfig protocol ip interface modify protocol ip interface summary protocol ip ping protocol ip route default protocol ip route noDefault protocol ip route summary security device access modify security device access summary security device user create security device user delete security device user modify security device user pwdRecover security device user summary security network access portSecurity system control initialize system control reboot system control softwareUpgrade system inventory system management alert addAddress system management alert create system management alert delete system management alert modify system management alert removeAddress system management alert summary system management alert test system management contact
What does the Command do? Removes a port from a VLAN. Displays summary information on a VLAN. Displays the CLI Wizard Logs the User out of the CLI. Displays detailed information on an Ethernet port. Enables or disables flow control. Sets the port capabilities. Sets the port speed and duplex mode. Enables or disables an Ethernet port. Enables or disables smart autosensing. Displays summary information on an Ethernet port. Performs basic IP management configuration. Resets IP information to factory defaults. Modifies IP interface information. Displays summary information on the IP interface. Polls remote devices. Defines the default route. Removes the default route. Displays summary information on the default route. Modifies access rights. Displays summary information on access rights. Creates a user. Deletes a user. Modifies a user. Enables or disables password recovery. Displays summary information on users. Enables or disables DUD and NTK. Resets to factory defaults. Performs a system reboot. Performs an agent software upgrade. Displays unit information. Adds an email address to an alert. Creates an alert. Deletes an alert. Modifies an existing alert. Removes an email address from an alert. Displays summary information for the alert settings. Generates a test alert. Sets the system contact.
Command (Continued)
system management location system management monitor modify system management monitor summary system management name system management password system management remoteAccess system management snmp community system management snmp get system management snmp next system management snmp set system management snmp trap create system management snmp trap delete system management snmp trap modify system management snmp trap summary system summary system unit alertLED system unit select trafficManagement qos classifier create trafficManagement qos classifier delete trafficManagement qos classifier detail trafficManagement qos classifier modify trafficManagement qos classifier summary trafficManagement qos profile addClassifier trafficManagement qos profile assign trafficManagement qos profile create trafficManagement qos profile delete trafficManagement qos profile detail trafficManagement qos profile listPorts trafficManagement qos profile modify trafficManagement qos profile removeClassifier trafficManagement qos profile summary trafficManagement qos serviceLevel summary trafficManagement qos trafficQueue summary
What does the Command do? Sets the system location. Modifies a monitored item. Displays summary information for monitored items. Sets the system name. Sets the system password. Changes remote access permissions. Sets the SNMP community string. Gets SNMP objects. Gets the next SNMP objects. Sets SNMP objects. Creates a trap destination. Deletes a trap destination. Modifies a trap destination Displays summary information on a trap destination. Displays summary information. Controls the Alert LED. Inputs commands to another unit. Creates a classifier. Deletes a classifier. Displays detailed classifier information. Modifies a classifier. Displays summary information on classifiers. Adds a classifier to a QoS profile. Assigns QoS profiles to ports. Creates a QoS profile. Deletes a QoS profile. Displays detailed information about a QoS profile. Lists all ports with their associated QoS profiles. Modifies a QoS profile. Removes a classifier from a QoS profile. Displays a summary of QoS profiles. Displays summary information on service levels. Displays summary information on traffic queues.
10
11
12
Copyright 2002, 3Com Technologies. All rights reserved. Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries. 3Com and the 3Com logo are registered trademarks of 3Com Corporation. Part Number: DQA1730-0AAA02 Published: October 2002