Beruflich Dokumente
Kultur Dokumente
Troy-Bilt is a registered trademark of MTD and is used under license to Briggs & Stratton Power Products. Troy-Bilt es una marca registrada de MTD y se usa abajo licencia a Briggs & Stratton Power Products.
Copyright 2006 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this material may be reproduced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC.
2
Parts Not Illustrated 198281GS MANUAL, Operators MS6669 MANUAL, Engine BB3061BGS BOTTLE, Oil 194274GS HARNESS,Wire, Power B4177GS CHARGER, Battery 199384GS DECAL, Family, CA EVP 191895DGS SET, Cord, 30A 198051GS KIT, Decal Service Optional Accessories 100031 STABILIZER, Fuel * - Items without part numbers are common fasteners and are available at your local hardware store. - Contact Engine Manufacturer
Item 1 2 3 4 5 6 7 8 9 10 11 12
Part # 198468GS 197472GS 198477GS 191481GS 192785GS 198649GS 197958GS 84198GS 75207GS 93857GS 84543CGS 43437GS
Description PANEL, Control COVER, Flip Outlets BOX, Control Panel BOOT, Circuit Breaker BREAKER, Circuit, 30A LIGHT, Led Panel SCREW, 3 x 6,Tapping CAP, Breaker, Circuit BREAKER, Circuit, 20A BAR, Retaining PPPHS, M3-0.5 x 18 OUTLET, 120/240V, 30A
Item 13 14 15 16 17
Description PALNUT, 3/16 OUTLET, 120V, 15/20A NUT, 5/32 Pal SCREW, 3.5 x 14,Tapping GROMMET
Parts Not Illustrated 188632GS BOOT, Rubber Wire 77043BGS CONDUIT, Flex * - Items without part numbers are common fasteners and are available at your local hardware store.
Item 1 2 3 4 5 6 7 8 9 10
Part # 186059GS 195616GS 198498AGS 193336GS 86308KGS 66386GS 66849GS 189769GS 81917GS 65791GS
Description ADAPTER, Mounting, Alternator ASSY, Rotor (Includes Item 11) STATOR RBC, (with O-Ring p/n 189197GS) HHCS, M6 - 1.0 x 140 SEMS ASSY, Holder, Brush TAPTITE, M5 - 0.8 x 16 REGULATOR,VLTG, AVR PIN, Roll, 4mm x 10 BEARING
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Part # B4966GS * 191267RGS 191265GS * 67989GS 77395GS 198629GS 87841GS * 198669GS B193200GS 194034GS B4135GS
Description WHEEL WASHER, 5/8" AXLE, 5/8" E-RING HHCS, M8 1.25 x 20 NUT, M8, Flange Serrated NUT, M6 Flange Lock ASSY, Support (Includes Item 9) MOUNT,Vibration HHCS, M6 - 1.0 x 16 GRIP ASSY, Handle w/ Grip KIT, Hardware Fold Down Handle PIN
* - Items without part numbers are common fasteners and are available at your local hardware store.