Beruflich Dokumente
Kultur Dokumente
ISSUE 1.6
Cell extension
Timer Interference Band Immediate Assignment Parameters Call Control and Processing Parameters
The cell data needs to be configured in a proper way so that the network can perform at the optimum level with occupying minimum resources.
2
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Content
Basic Property
Cell Extension Timer Interference Band Immediate Assignment Parameters Call Control and Processing Parameters
3
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Basic Property
Basic property
SACCH Multi-Frames
Paging Times Max TA
4
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Range:0~63
Paging Times
Unit: times
Default:1 Description: In BTS2.X, this parameter is used for BTS to
6
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Max TA
Range:
0~63 (Normal cell and single TS extended cell). 0~255 (Dual TS extended cell).
Description: Maximum Time Advance. It determines the actual coverage area of BTS. When BTS receives the channel request message, it determines whether channel assignment should take
place in the current cell by comparing the TA with the value of this
parameter. Confidential Information of Huawei.
No Spreading without Permission.
7
Security Level: Internal
Cell Extension
Cell extension
8
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Default: Normal cell Description: It indicates whether a cell is an extended cell and the extended cell mode. Single timeslot extension is based on the fixed delay extension and dual timeslot extension is based on classic extension solution.
9
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Range:0~35
Unit: Km
Default: 34 (single timeslot extended cell) Description: This parameter is valid only for the single timeslot
10
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Timer
Timer
T200
N200
11
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Description:
T200 timers are used to avoid deadlock during data transfer on the data link layer.
On the LAPDm layer, every time a message is sent, the opposite end is
If the timer times out, the sender will regard that the receiver has not
received the message and will resend the message.
The maximum resend times are determined by N200. Different timer values should be set for different LAPDm channels such
12
Range: Yes, No
Default: No
Description: Determines whether BSC delivers LAPDm N200 parameters to BTS. If it configured as Yes, then deliver LPADm N200 parameters will be delivered to BTS, otherwise not.
13
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Interference Band
Interference band
14
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Recommended values:
110 ( Interference band threshold 0) 105 ( Interference band threshold 1) 98 ( Interference band threshold 2 ) 90 ( Interference band threshold 3 ) 87 ( Interference band threshold 4 ) 85 ( Interference band threshold 5)
Security Level: Internal
15
16
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Range: Yes, No
Default: No
Description: It determines whether BSC delivers immediate assignment retransmit parameters to BTS. If it configured as Yes, immediate assignment retransmit parameters will be delivered, otherwise not.
17
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Range: 0~254
Unit: 250 ms
Default: 4 Description: In the time of Max Delay of Imm_Ass Retransmit,
18
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Range:1~5
Unit: Times
Default: 2 Description: Max retransmit times of immediate assignment
19
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
20
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Range: Yes, No
Default: No
Description: Option "Yes" means that TCH channel can be immediately assigned as signaling and traffic channel when SDCCH has no available resource. The option "No" means that only SDCCH can be assigned.
21
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Range: Yes, No
Default: No
Description: Option "Yes" means it is allowed to optimize assignment of channels activated by BTS when there are multiple MS access requests. This is to guarantee network response speed.
22
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Direct Retry
Range: Yes, No
Default: Yes
Description: the switch to control direct retry is enabled or not.
23
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal