Sie sind auf Seite 1von 30

Machine Safety

Safety Applications

Personal Protection
Objective To protect hands and fingers from the hazardous parts of a carton erector

Guarding in ESD-Sensitive Environment

Objective To guard a wafer cell in an environment sensitive to electrostatic discharge

Safe Material Access

Objective
To prevent injury while allowing materials into a process

Perimeter Guarding

Objective To combine a light screen and mirrors to guard a access to a work cell

Perimeter Guarding
Objective To shut off the hazardous motion of a tube bender when someone enters the cell

L-Configured Guarding
Objective To link multiple light screens to safeguard a robotic cell

Single-Point Access Guarding

Objective To guard access to a cell, using points and mirrors

Entry/Exit Guarding With Muting


Objective To prevent personnel from accessing a hazardous area

Perimeter Guarding With Reduced Resolution


Objective To combine a light screen and mirrors to guard a machine, while allowing material to pass through

Small Machine Guarding

Objective To provide pointof-operation guarding for small machinery

Large Machine Guarding


Objective To initiate a machine cycle from a safe distance

Lower-Risk Machine Guarding


Objective To provide guarding for a lower-risk application

Lower-Risk Machine Guarding


Objective To protect personnel from a machine that can cause slight injuries

Two-Hand Control Monitoring


Objective
To monitor any actuation device pair, using a module with two redundant output contacts

Two-Hand Control Monitoring


Objective
To monitor any actuation device pair, using a module with four redundant output contacts

Two-Hand Control Monitoring With Muting


Objective
To use a twohand control to start a cycle and mute during the cycle's safe portion

Emergency Stop Monitoring


Objective
To stop a machine's operation in an emergency, using a module with three output switching channels

Emergency Stop Monitoring


Objective
To stop a machine's operation in an emergency, using a module with four output switching channels

Gate Monitoring
Objective
To monitor a door-guarding switch, whether the switch is mechanical or magnetic

Mat Monitoring

Objective To monitor a safety mat that provides area guarding by responding to pressure

Gate Monitoring
Objective To prevent trapping or crushing by protecting an interlocked breakaway guard with a integral hinge

Switch Door Locking


Objective To lock out to an area until a machine's hazardous motion stops

Emergency Stopping
Objective
To instantly stop the hazardous motion of a conveyor from multiple points, using a centermounted switch

Emergency Stopping
Objective To instantly stop the hazardous motion of a conveyor from multiple points, using a endmounted switch

Emergency Stopping

Objective
To instantly stop the hazardous motion of a machine from a safe distance

Monitoring Hazardous Motion With Multiple Inputs


Objective
To monitor multiple safety and non-safety input devices and provide stop and start functions for a machine with hazardous motion

Das könnte Ihnen auch gefallen