Beruflich Dokumente
Kultur Dokumente
Block type PLC means one unit containing power supply, CPU, and digital I/O parts.
CPU
Wire connection
Module type PLC consists of embedded slots such as base, power supply , CPU, digital I/O and special module.
Communication
Power supply
Digital I/O
Analog I/O
CPU
Wire connection
Master-K
GLOFA-GM
MK 80s MK 120s
MK 200s MK 300s
GM7 GM7U
GM6 GM4 GMR
Digital I/O
2005
XGT
XGO
Block type
Module type
Redundancy
MK80s
MK120s MK200s MK300s
GM7
GM7U GM6 GM4
Digital I/O
Block type
Module type
Master-K
General Introduction of Master-K
- Window based programming: KGLWin - Various product ranges by digital I/O points: 10 ~1,024 - Easy programming tool & cost efficient
capability
Block type
Module type
Master-K 80s
Overview
- Dedicated CPU processing speed (0.5 /step) cost-effective solution - Variety of CPU just fit to your applications 10/20/30/40/60 I/O types - Built-in functions PID with Auto-tuning, High-speed Counter, External Interrupt, Pulse Catch, Pulse Output, Input Filters, RS-232C - Powerful Network Built-in RS-232C channels( In K7M-DR10S, both RS-232C and RS-422/485 ), RS-232C(for modem), RS-422/485 serial interfaces as option Profibus-DP (slave), DeviceNet (slave) and F-net (master)
Master-K 80s
System Configuration
Wire connection
Hybrid Analog I/O Module Input : 2Ch, 0-10Vdc, 0-20mA, 12Bit(0-4,000), 0.5% or less(Full scale) Output : 1Ch, 0-10Vdc, 0~20nA, 12 Bit(0~4,000), 0.5% or less(Full scale)
Communication module RS-422, RS-232C (for modem) Module including MODBUS (Master/Slave, RTU, ASCII Mode) protocol.
Master-K 80s
Networking application
- Built in Network Two communication channels using one port Dedicated mode, MODBUS mode, User mode - Option unit RS-232C: For modem connection (dial-up modem, dedicated modem) RS-422/485: Dedicated mode (High-speed link service, Multi-drop communication) MODBUS mode (Master, Slave, ASCII, RTU mode), User mode (Asynchronous method 9,600 ~ 128,000 bps)
GMWIN S/W
Main computer Operator Interface The networking application of MK80 is equal to the one of GM7.
Master-K 80s
Comparison with competitors
MK80s(LG)
Digital I/O Processing Speed Program memory High speed counter Pulse Catch input Input Filter External Interrupt 10~80 0.5s/step 68K byte 1ph: 16KHz, 2ph: 8KHz 0.2ms (8pts) 0~15ms (8pts) 0.4ms (8pts) 12KHZ Flash memory O RS-232C: 2CH With Auto-tuning
CPM1A(Omron)
10~100 1.7s/step 2,048 word 1ph: 5KHz, 2ph: 2.5KHZ 0.2ms 1~128ms 0.3ms (2~4pts) 12.5HZ Flash memory X X X
FX0N(Mitsubishi)
24~128 1.6s/step 2,000 steps 1ph: 5KHz, 2ph: 2.5KHz 50s 1~15ms (8pts) 0.3ms (2~4pts) 12HZ EEPROM X X X
S7-200(Siemens)
14~128 1.3~0.8s/step 1~8K steps 1ph: 2KHz, 2ph: 20KHZ 0.2ms (1~4pts) -24HZ
Built-in
O RS-485 ~ Profibus-DP X
Master-K 80s
Comparison with competitors
MK80s(LG)
Analog I/O 2 CH/1CH, 12 bit
CPM1A(Omron)
X
FX0N(Mitsubishi)
2CH/1CH
S7-200(Siemens)
3CH/2CH, 3CH/1CH
Network
RS-232C/422
RS-232C/485
Optional
20 pts
8/16 pts
8/16/32 pts
Price
1.2~1.4
1.4~1.7
1.4~1.8
Master-K 120s
Overview
- Main unit Economic type: 10/14/20/30 (10/14 points, analog timer 2 points) Total 70 points are available (up to 2 extension module, 1 comm. Module) Standard type: 20/30/40/60 points DR/DRT types (DRT type for positioning) Total 120 points are available (up to 3 extension module, 1 comm. Module)
- Processing speed Standard type: 0.1s/step Economic type: 0.4 s/step - Various input handling Input filter: Delay time can be set from 0ms to 1000ms (8 points unit) Pulse catch: 10s (P0, P1), 50s (P2~P7) External interrupt: 10s (P0, P1) - Improved special functions High-Speed Counter Positioning PID control (Standard type only)
Master-K 120s
Built in functions
-Pulse catch function Using pulse catch function, a very short pulse signal can be taken as valid input signal which cant be executed by general digital input.
Min. 10 s
0
4
1
5
2
6
3
7
Master-K 120s
Built in functions
-Input filter function An input signal is valid after the setting time after an input filter signal becomes on. The input image data turn off after the setting time after an input filter signal becomes off.
Input on/off Delay time (Filter time) Input signal Input image data
Time
Input signal
Input image data
Any input signal shorter than assigned on/off filter time from KGLWIN is ignored.
Master-K 120s
Built in functions
- Interruption function MK120s can perform interrupt function using input points without any special interrupt modules. - High Speed Counter function Using HSC function, High speed pulses which are generated from encoder of pulse generator can be counted. - Positioning control The position of servo or stepping motor can be controlled by positioning function. - PID control PID function is integrated into the man unit. And, all the PID function can be performed with instruction (PIDB, PID8AT). P operation, PI operation and on/off operation can be selected easily. Manual output (user-defined forced output) is available. By proper parameter setting, it can keep stable operation regardless of external disturbance. The operation scan time (the interval that PID controller gets from an actuator) is changeable for optimizing the system characteristics. PWM (pulse width modulation) output is available.
Master-K 120s
System Configuration
- Remote communication using a modem
Comm. module
K120s Modem
Modem
K120s
Master-K 200s
Overview
- Dedicated CPU offers Higher processing speed(0.5 /step) More reliable system More cost-effective solution -Variety of CPU just fit to your applications - Maximum I/O : 384 points CPUA : Computer Link(RS-232C) CPUB : Computer Link(RS-485), PID and RTC(Real Time Clock) included CPUC : Computer Link(RS-232C), PID and HSC(High Speed Counter), RTC (Real Time Clock) included
- Built-in Power supply for Analog control Output :5Vdc 2A, +15Vdc 0.5A, -15Vdc 0.2A
- Powerful Standard & High speed network RS232C, RS422/485 include MODBUS(RTU, ASCII), AB DF1(Full Duplex), Fieldbus (Fnet), F-net Single Remote I/O
As mentioned on page 6, MK200s and GM6 have the same CPU specification and communication system.
Master-K 200s
Special specification
Built-in memory
- Built-in 7K Program Back-up without battery - Not necessary additional memory pack such as COM1(OMRON)
1 6
RXD
TXD
TXD
9
Main Computer
Master-K 200s
Built-in Functions of CPUs
B type (CPU-GM6B)
- RS-422/485 Station : 0~31(32 stations) Speed : 9,600/19,200/38,400 bps Multi-drop Network with High Speed 1:N Computer N : N PLC Computer
C type (CPU-GM6C)
- High Speed Counter
1 phase Up/Down or 2 phases Up/Down Counting Range : 0~16,777,215 (24bit) Counting Speed : Max. 20Kbps Multiplication : 1 / 2 / 4 Condition Up/Down for 1 phase ; Program or External Input - PID with auto-tuning function Simple PID control using software
K200S
K200S
K200S
K200S
Slave
- RS-232C Interface
- RTC (Real Time Clock) Record of Power Failure etc. Available
Record of Power Failure & etc. Available PID with Auto-tuning function
Master-K 200s
Special modules of MK 200s
Communication
A/D conversion
D/A conversion High Speed Counter APM Temperature Control Communication
Power supply
Analog I/O
HSC
PID
Master-K 300s
Overview
- Dedicated CPU offers Higher processing speed(0.2 /step) 15 KStep Program memory, Built-In RTC function More reliable system Compact size and Max. I/O up to 1,024 points - Easy to use Windows based programming S/W Portability & Compatibility of software Mnemonic and LD Language support On-line Editing Various debugging and self-diagnosis - Variety of special modules Analog I/O, PID, RTD, TC, HSC, positioning control - Powerful Standard & High speed network RS232C, RS422/485 include MODBUS(RTU, ASCII), AB DF1(Ful Duplex), Fieldbus (Fnet), Single Remote I/O (via Fnet)
Master-K 300s
Temperature control (special module)
- Features Simultaneous control of different processors with one module Forward/reverse control selectable Manual output (forced output) available Auto-tuning (P.I.D values are found automatically) No additional Input/Output due to various I/O built-in functions Input: RTD (2 types), Thermocouple (7 types), Voltage, Current Output: Current, Open collector output of time proportional control Various debugging and self-diagnosis
As mentioned on page 6, MK300s and GM4 have the same special modules.
Master-K 300s
Thermocouple (special module)
- Features 5 type thermocouple available (KS, JIS, ANSI, DIN, BS) Automatic reference junction compensation Burn-out detection in every channel Other
special modules
- RTD module 4 input channel, 0~16,000 digital conversation value - PID control module Max. 16 loops, Forward/Reverse control selectable - Analog timer module Setting and adjusting time (highly precise range) available - Positioning module (APM) Highly reliable position Arc/ linear interpolation, separate/ synchronous operation Trapezoidal & S-curve acceleration/ deceleration function.
As mentioned on page 6, MK300s and GM4 have the same special modules.
KGLWIN (Software)
Overview
- User Friendly Ladder Diagram and Mnemonic Language Supported - Window-Based Tool( Windows 95, 98 and NT) - Applicable to all LG Master-K series - Remote programming via network is available - System configuration by Project Structure - Several windows can be displayed in a screen - Various Self-Diagnosis and abundant PLC information in On-Line mode - Display comments in a program available all printers supported by Windows.
On-line editing
- Possible to edit programs in Run mode - Forced I/O On/Off and change the value of data
Simple Frame Editor Tool enables to replace old complex programs for the communication protocol.
GLOFA-GM
General Introduction of GLOFA-GM
- Global standard (IEC61131-3) language - Dedicated CPU (one-chip) for fast processing - Convenient programming tool - International standard communication protocol suitable for CIM - Various special function module - International standard Ethernet (GM4/6)
capability
Block type
Module type
Redundancy
GLOFA-GM7
Overview
- Dedicated CPU offers Higher processing speed(0.5 /step), 64 KB Programming Capability More cost-effective solution - IEC 61131-3 with Windows based programming S/W IL, LD and SFC supported Simulation Function and User defined Function Block - Variety of CPU just fit to your applications 10/20/30/40/60 I/O types - Built-in I/O PID with auto-tuning, High-speed counter, External Interrupt, Pulse catch, Pulse output, and Input filters, RS-232C - Network Built-in two RS-232C channels support Modbus Protocol (In G7M-DR10A, both RS-232C and RS-422/485). RS-232C (for modem), and RS-422/485 are related to Modbus protocol as option Profibus-DP, DeviceNet Slave, F-net Master.
GLOFA-GM7
System Configuration
Wire connection
Hybrid Analog I/O Module Input : 2Ch, 0-10Vdc, 0-20mA, 12Bit(0-4,000), 0.5% or less(Full scale) Output : 1Ch, 0-10Vdc, 0~20nA, 12 Bit(0~4,000), 0.5% or less(Full scale)
Communication module RS-422, RS-232C(for modem) Module including MODBUS (Master/Slave, RTU, ASCII Mode) protocol.
GLOFA-GM7
Networking application
- Built in Network Two communication channels using one port Dedicated mode, MODBUS mode, User mode - Option unit RS-232C: For modem connection (dial-up modem, dedicated modem) RS-422/485: Dedicated mode (High-speed link service, Multi-drop communication) MODBUS mode (Master, Slave, ASCII, RTU mode), User mode (Asynchronous method 9,600 ~ 128,000 bps)
GMWIN S/W
Main computer Operator Interface The networking application of GM7 is equal to the one of MK80s.
GLOFA-GM7U
Overview
- Main unit Various main module: 32types 20/30/40/60 points AC/DC power, DC input, Relay/ Transistor output - Global standard (IEC61131-3) language: IL, ID, SFC Total 120 points are available (up to 3 extension module, 1 comm. Module) - Processing speed: 0.1~0.9s/Basic instruction - Various expansion module: 23 types Digital I/O 6 types, Analog I/O 9 types, Communication I/F 6 types, Option module 2 types
- Communication Channel: 3 channels Loader: 1ch, Built-in RS-485: 1ch Built-in RS-232c or communication I/F: 1ch Various mode: Dedicated/User-defined/ Modbus/No Protocol/LG Inverter mode
GLOFA-GM7U
Built in functions
- High speed counter function (32bits) 1 phase: 100kHz 2CH, 20kCH (4CH in total) 2 phase: 50kHz 1CH, 10kHz 1CH (2CH in total)
- Positioning function Control axis: 2 axes (100kHz) Position/Speed/Synchronous operation - Improved PID control function Relay and PRC auto-tuning PWM output, Delta MV Positioning / Velocity algorithm - Pulse catch, External Interrupt: 10s 2points, 50s 6points - Input filter: 0~1000ms
As mentioned on page 6, MK120s and GM7U have the same special modules , so the explanation of special modules in GM7U is not included here.
GLOFA-GM6
Overview
- Dedicated CPU offers Higher processing speed(0.5 /step), 64 Kbyte Programming Capability More cost-effective solution
- IEC 61131-3 with Windows based programming S/W IL, LD and SFC supported Simulation Function and User defined Function Block - Variety of CPU just fit to your applications - Maximum I/O : 384 points CPUC : Computer Link(RS-232C), PID and HSC(High Speed Counter), RTC (Real Time Clock) included - Built-in Power supply for Analog control Output :5Vdc 2A, +15Vdc 0.5A, -15Vdc 0.2A - Powerful Standard & High speed network RS232C, RS422/485 support MODBUS(RTU, ASCII), AB DF1(Ful Duplex) protocol, Fieldbus (F-net), Single Remote I/O(F-net), Profibus-DP, DeviceNet, and Single Remote I/O.
GLOFA-GM6
Special modules of GLOFA-GM6
Communication
A/D conversion
D/A conversion High Speed Counter APM Temperature Control Communication
Power supply
Analog I/O
HSC
PID
GLOFA-GM4
Overview
- Dedicated CPU offers Higher processing speed(0.2 /step), 128 Kbyte Programming Capability More reliable system High performance - IEC 61131-3 with Windows based programming S/W Portability & Compatibility of Software IL, LD and SFC supported Simulation Function and User defined Function Block - Maximum I/O : 2,048 points
- Powerful Standard & High speed network RS232C, RS422/485 include MODBUS(RTU, ASCII), AB DF1(Ful Duplex) protocol, Ethernet, Fieldbus(F-net), Single Remote I/O(F-net), Profibus-DP, DeviceNet, and Single Remote I/O
As mentioned on page 6, MK300s and GM4 have the same special modules , so the explanation of special modules in GM4 is excluded here.
Network (Cnet)
Cnet (Serial interface)
- RS232C, RS422/485 Frame Editor Tool enables to communicate with any other PLCs using user defined protocol - MODBUS mode Cnet module used as a Master or Slave station interface to connect MK 200s to the MODBUS network using MODBUS RTU or ASCII protocol - AB DF1 (Full Duplex) Protocol
Network (Cnet)
Cnet (Serial interface)
-RS-232C/422 Equipment
Comm. device
MK Series
RS-232C/422
1 : N Link
CUEA
CUEA
CUEA
CUEA
Network (Cnet)
Cnet (Serial interface)
N : M Link
MK series
RS-232C
CUEA
Different PLC
RS-232C
CUEA
Supports MODBUS and AB protocol : In-programmable for MODBUS(RTU, ASCII) or AB DF1(FULL DUPLEX) protocol in slave station.
MK Series: Master
CUEA
CUEA
RS-422
RS232/RS422
Network (Fnet)
Fieldbus (Fnet) & single remote I/Os
- Fnet (LG dedicated Fieldbus network) supports long distance communication Up to 5.25km (using 6 repeaters), generally 750m - Dedicated Gate Array enables High speed communication and Reliability Transmission speed : 1M bps - Mountable up to 2 modules in one base board
Network (Fnet)
Fnet configuration
Terminal resistance Max.5.25km Repeater (Max. 6) Terminal resistance
. . . . . . .
Active Coupler (optic)
. . . . . . .
Smart I/O GM7/K80S Stand-alone(Single) Remote DC In (16P) Stand-alone Remote Relay Out(16P)
PMU
Network (Fnet)
Fnet configuration
- Programming & Monitoring for 2nd layered remote PLC
1st 2nd
CPU
Fnet
CPU
Fnet
KGL-Win Loader
Local
Fnet
CPU Fnet Fnet CPU Fnet Fnet
Fnet
CPU Fnet Fnet CPU Fnet Fnet CPU Fnet Fnet
2nd
Open FEnet
Bridge or router
Ethernet I/F
LG PLC
LG PLC
LG PLC
Other PLC
Dedicated FEnet
LG PLC
LG PLC
LG PLC
Network (DeviceNet)
DeviceNet
- Max. 63 slave modules control with one master module - Max. 2,048 I/O points control with one master module - Flexibility in network configuration: multi-drop and T- branch connection - Connectable to other master module and various slave modules Communication with other slave modules as master Communication with other master module as slave (Mode change by mode switch in master module) - GM4-CPUC: 8 in total, GM4-CPUB: 4 in total GM4-CPUA/GM6: 2 in total - GM7: 1 slave module - Master/slave communication as predefined master/slave connection communication using scan list enabling highspeed link without other configuration tool
Network (DeviceNet)
DeviceNet configuration (LGIS system)
PC MMI
LG PLC
LG PLC
LG PLC
DeviceNet
Smart I/O
Network (DeviceNet)
DeviceNet configuration (with other products)
PC MMI
LG PLC
LG PLC
AB, Omron
DeviceNet
Network (Profibus-DP)
Profibus-DP
- Profibus-DP (Decentralized periphery) - Low cost network appropriate to field level - Proper to communicate among a master automation device and distributed slave I/O devices - Master slave network - Fast slave network - Based on RS-485 communication as application layer - Communication speed: 9.6kbps~12Mbps - Communication distance: 100~1,200m - Max. 99 stations (32 stations/segment) support - Network setup Sycon (configuration tool) - Communication using high-speed link parameter
Network (Profibus-DP)
Profibus-DP configuration
PC MMI
LG PLC
LG PLC
LG PLC
Profibus-DP
Smart I/O
Profibus-DP
PC
AB, Omron