Beruflich Dokumente
Kultur Dokumente
Todays Topics
Steelmaking Flowline Blast Furnace
Temper Mill
Hot Dip Coating Line Electrogalvanizing Line
Steelmaking Flowline
Blast Furnace
Scrap
Electric Furnace
Limestone
Crushed
Oxygen
Coal
Coke Ovens
Slag
Molten Iron
Steelmaking Flowline
Ladle Metallurgy
Slab
Hot Strip
Pickling
Cold Strip
Annealing
Continuous Casting
Temper Rolling
Coating
Blast Furnace
HOT AIR
SINTER
CRUSHED
COKE
Blast Furnace
Input
Iron ore, coke, limestone and heated air
Metallurgy
Chemical reactions cause heating, reduction and melting Impurities separate and float on top of the molten iron as slag
Output
Molten Iron (Pig Iron) is cast into
Torpedo Cars
Blast Furnace
Blast Furnace
COKE (carbon) + OXYGEN C+O2 CARBON MONOXIDE + HEAT CO + HEAT
oxygen
Metallurgy
Impurities are oxidized and some separate / float on top of the molten steel as slag
Output
Molten steel is tapped into a ladle
OXYGEN + CARBON
OXYGEN + MANGANESE
CO
+ HEAT
MnO (SLAG)
OXYGEN + PHOSPHORUS
P2O5 (SLAG)
OXYGEN + SILICON
SiO2 (SLAG)
Vacuum Degasser
Input
Molten steel from basic oxygen furnace (BOF)
To Vacuum Pump
Metallurgy
Vacuum degasser snorkels inserted into ladle of molten steel Argon gas siphons molten steel through a vacuum chamber Dissolved gases and carbon are
removed
Inert Gas Inlet
Ladle
Output
Ultra-low carbon steel
Continuous Caster
Input
Molten steel from ladle is transferred into a holding vessel (tundish) on top of the Continuous Caster The tundish continuously meters molten steel into a water-cooled, oscillating mold via a Submerged Entry Nozzle (SEN)
Output
Solid slabs are torch-cut
Continuous Caster
Output
Hot bands from <0.1 to 0.375 thick
Pickler
Input
Hot bands of steel are processed through a chemical bath to remove surface oxides
Output
Pickled (Oiled) Band - free of
Output
Cold Roll Full Hard coils with proper thickness and surface finish Transferred to Box Annealing, Hot Dip Coating Line or shipped to Customer
Box Annealing
Input
Cold rolled Full Hard coils are stacked, covered and a non-oxidizing atmosphere is introduced A furnace is lowered over the cover and fired to a prescribed cycle of time and temperature
Output
Annealed steel with improved mechanical properties Transferred to Temper Mill
Temper Mill
Input
Annealed coils
Output
Cold Roll steel with continuous yielding, improved flatness and a uniform surface texture Thickness typically reduced <1% Shipped to Customer or transferred to the Electrogalvanizing Line
Output
Hot Dip Galvanized, Galvannealed or Aluminized steel Shipped to Customer
Electrogalvanized Line
Input
Cold Roll (Box Annealed & Tempered) coils are welded together and continuously processed through the line Plating cells use electric current to apply zinc to the steel
Output
Electrogalvanized steel Shipped to Customer
Electrogalvanized Line
Questions?