Beruflich Dokumente
Kultur Dokumente
TWI
F 123
Part of the CSWIP 3.0 examination is to inspect & assess a Fillet welded Tee for its size & visual acceptance to the applicable code.
World Centre for Materials Joining Technology
Fillet Weld Leg Length: The gauge may be used to measure fillet weld leg lengths up to a maximum of 25mm, as shown on left.
F 123
a) The minimum leg length size is 6mm (Plate thickness) b) The maximum leg length size is 9mm (Plate thickness + 3mm) c) The minimum throat thickness is 4.2mm (Plate thickness x 0.7) d) The maximum throat thickness is 6.5mm (Plate thickness + 0.5mm
Copyright 2004, TWI Ltd
1) Measure and record the following details: VERTICAL LEG LENGTH (Max & Min) HORIZONTAL LEG LENGTH (Max & Min) = Max 8mm Min 7mm
The VERTICAL LEG LENGTH Please state: ACCEPT The HORIZONTAL LEG LENGTH Please state: REJECT The THROAT THICKNESS Please state: REJECT
Copyright 2004, TWI Ltd
ACCEPT or REJECT?
ACCEPT or REJECT?
ACCEPT or REJECT?
MISC:[ ARC STRIKES] Length: Spatter Depth: --------Copyright 2004, TWI Ltd
* All spatters should have been removed prior to submission for inspection