Beruflich Dokumente
Kultur Dokumente
Rated frequency
Rated Normal current (t.a. 40C) Short-time current - 1s Making capacity Gas absolute pressure (20 C) Distance between phases Electrical life (**) Mechanical endurance
Hz
A kA kA kPa mm Class E3 Class E1
50/60
400/630 12.5/16/20/25 31.5/40/50/62.5 125 230 (line) (earth)
Class M1 (**)
(*) withstand voltage between phase and earth and between phases (withstand voltage between open contacts) (**) According to IEC 60265-1, IEC 60129
4 3
Open
Line
2 1
Earth
Maximum safety during maintenance and operations in the cable or fuse compartment even with busbars energized Reduced risk of short circuit between phases or between the two insulators of the same phase
--
--
--
x
--x --
x
---x
-x ----
--x ---
6 3
6
2
SHS2 equipped with T3 operative mechanism SHS2/I - SHS2/I/N - SHS2/IF SHS2/IB 1 Free-key for Isolator in close position 1 Free-key for Isolator in open position 1 Free-key for Isolator in open position 1 Free-key for Isolator in open position 1 Free-key for Isolator in open position 1 Free-key for Earthing switch in close position 1 Free-key for Earthing switch in close position 1 Free-key for Earthing switch in close position 1 Free-key for Earthing switch in close position 2 Free-keys for Earthing switch in close position 2 Free-keys for Earthing switch in close position 1 Free-key for Isolator in close position 1 Free-key for Isolator in open position 1 Free-key for Isolator in close position SHS2 equipped with T4 operative mechanism 1 Free-key for Isolator in open position SHS2/ES 1 Free-key for Earthing switch in close position 1 Free-key for Earthing switch in open position 1 Free-key for Isolator in close position 1 Free-key for Earthing switch in close position 1 Free-key for Earthing switch in close position 1 Free-key for Earthing switch in open position 1 Free-key for Isolator in close position 1 Free-key for Earthing switch in close position 2 Free-keys for Earthing switch in close position 2 Free-keys for Earthing switch in close position
SHS2 Accessories
Fuse Holder
Line and Earth key locks Auxiliary contacts (2NA+2NC for each position) (1) Voltage indicators (3) Frame with isolators or isolators with capacitive dividers (4) Opening coil (24 48 110 220 Vdc/ac) (2) Door lock Motor operation (24 Vcc 48-110-220Vdc/Vac) for spring operating mechanism) Fuse adaptors (for fuse length e=192 mm and e=292mm) Spaced earthing switch (making capacity 2,5kA)
(1) On T2 (stored energy) operative mechanism when the opening coil is required for switch disconnector in closed position a maximum of 1NO+1NC auxiliary contacts are available (2) Available only on T2 operative mechanism (3) Require accessory (4)
SHS2 Accessories
Caption: 1. Line key locks 2. Earth key locks 3. Auxiliary contacts 5 3 4 1 5
4. Opening coil
5. Voltage indicators
2 3
2.
SHS2/T2M SHS2/T2M/N
SHS2/T2F SHS2/T2F/N
SHS2/I SHS2/I/N
UNIMIX P3
UNIMIX P2
UNIMIX ASR
SHS2/IB
SHS2/IF
UNIMIX M
Width 500 mm
UNIMIX P1F
Width 750 mm
UNIMIX A
Width 500 mm
SHS2/ES