Sie sind auf Seite 1von 12

LABORATORY OF NON-METALLIC MATERIALS

Chair of Non-metallic Materials

Chief of Chair: Prof. ScD PETAR PETROVSKI petrovski.petar@bih.net.ba Cheaf of Laboratory : Prof. ScD PETAR PETROVSKI petrovski.petar@bih.net.ba Tecnical manager: Prof. ScD MARINA JOVANOVI marina.jovanovic@famm.unze.ba Laboratory Staff: Prof. ScD ILHAN BUATLI ScD ADNAN MUJKANOVI BsC KIMETA AUEVI BsC SELVEDIN HRUSTI BsC AMEL ZAHIROVI

ACTIVITIES OF LABORATORY OF NON-METALLIC MATERIALS


Activities of laboratory are related to the testing of cement, lime, gypsum, asphalt, fresh and hardened concrete, concrete structures, concrete pipe, curbs and other prefabricated elements, plaster, clay, brick products, and other building materials. In addition to investigation of commercial construction materials, our laboratory is engaged in examining various natural and waste materials, byproducts from the production of various industries and finding their application in construction and production of new materials, as well as research aimed at increasing the durability of concrete structures.

Testing of stone and stone aggregate


LABORATORY OF NON-METALLIC MATERIALS
Stone and aggregate sampling Sample preparation for testing Mineralogical petrological analysis Chemical analysis Abrasion resistance (Los Angeles)

Impact value
Chrushing value Compressive strength Flexural strength

Testing of stone and stone aggregate


LABORATORY OF NON-METALLIC MATERIALS
Particle size distribution dry sieving Particle size distribution - sedimentation Particle size distribution laser analyser (Malvern Mastersizer 2000) Aggregate fines content wet sieving Bulk density (compacted and loose condition) Specific gravity Water absorption Grain shape Moisture content Content of weak grains Content of clay Frost resistance (Na2SO4 solution method)

Testing of cement
LABORATORY OF NON-METALLIC MATERIALS

Chemical analysis Specific gravity Bulk density Specific surface (Blaine method) Volume stability (Le Chatelier method) Time of seting and hardening Shrinkage Compressive strength Flexural strength

Testing of gypsum and lime


LABORATORY OF NON-METALLIC MATERIALS
Chemical analysis Standard consistency and waterlime ratio Lime slaking rate Quick lime content Volume stability Water retention Time of setting Bulk density Specific gravity Compressive strength Flexural strength

Testing of concrete
LABORATORY OF NON-METALLIC MATERIALS
Fresh concrete consistency (Slump, Flow table, Vebe-method) Air content in fresh concrete Temperature in fresh concrete Making and curing of concrete samples Compressive strength Flexural strength of concrete Rebar detection - Covermeter Crack detection (Ultrasonic tester) Crack detection (Microscope) Water permeability Frost resistance

Testing of asphalt-concrete
LABORATORY OF NON-METALLIC MATERIALS

Depth of penetration Ring and Ball Softening Point Quantitative Extraction of Bitumen Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Marshall stability and flow

Testing of clay
LABORATORY OF NON-METALLIC MATERIALS
Chemical analysis Mineralogical analysis (DSC, DTA, TGA, dilatometry) Refractoriness Particle size distribution Specific gravity Standard consistency Drying abd firing behaviour Loss of ignition Plasticity (Pfefferkorn method) Thermal changes

Testing of massonry brick


LABORATORY OF NON-METALLIC MATERIALS
Dimension, shape, apperance Bulk density Compressive strength Water absorption Porosity Frost resistance Lime content Soluble salts content Water impermeability of tile Impact resistance of tile

Testing of slag and fly ash


LABORATORY OF NON-METALLIC MATERIALS
Chemical analysis Mineralogical analysis
(DSC, DTA, TGA, dilatometry)

Volume stability Sintering point Loss of ignition

Testing of wood
LABORATORY OF NON-METALLIC MATERIALS
Shrinking and sweling percentage Bulk density Compressive strength Tensile strength Flexural strength Shear strength

Das könnte Ihnen auch gefallen