Beruflich Dokumente
Kultur Dokumente
Face-Bow Transfer
Armamentarium
Toggle & Shaft Hardware
Face-Bow
Nasion Relator
Facebow Apparatus
Lower Frame
Support Bar
Jack Screw
Patient can assist in holding bite fork in place but must bite on cotton rolls
Nose Piece
1. Center the plastic nose piece on the patients nasion. 2. Tighten thumb screw on the nasion-relator assembly 3. This secures the vertical relationship in the sagittal plane
Attaching Hardware
Have patient look at you. Make sure face bow is parallel to an imaginary line going between the pupils.
Loosely guide the vertical bar & horizontal cross bar to the bite fork shaft
Attaching Hardware
1. Make sure the horiz. cross bar is above the bite fork shaft
Attaching Hardware
2. Tighten the T-screw on the vertical bar 3. Tighten the horizontal frontal T-screw as well
Loosen the thumb screw on the nasion relator & remove it from the face-bow
Support Bar
Jack Screw
Secure maxillary cast to bite fork by melting some of the wax to the cast in selected areas
You are now ready to affix the maxillary cast to the upper member of the articulator with mounting stone
QA Form
Have Mandibular cast ready to mount Have a mounting plate available for the mandibular member of your articulator
NEXT WEEK: