Beruflich Dokumente
Kultur Dokumente
1.Install 2.Click to install TEMS 3.When finished,copy file in this folder to NOW, you can open TEMS
Install MS driver
Open There is a folder MS driver Scanner driver MOS driver
; inside
1.Add cellfile
2.Add map
If we add test route(blue) and city route, two route not match
3.Add/Edit Themes
Attention:2G test
For 2G,youd better use K790i;if you use K800i you should lock GSM first. Dont use K800i to test 2G-FTP_DL and FTP_UL,Because K800i dont support EGDE. If you do CQT(FTP_DL,FTP_UL), W995 is better qulity for DL/UL speed(first lock GSM). If device cant connet TEMS, 1.check device driver 2.check data cable and hub 3.check device 4.pull out device and plug in 5.restart TEMS 6.restart computer
1.2G-SSV
DT:Long call; Short call; Ftp download Need 3 K790i,1 GPS CQT:Ftp DL;Ftp UL;Call Setup check Need 2 K790i,1 GPS; Ftp DL and Ftp UL use 1MB file
Call Setup check:2 MS lock sector1 BCCH,call each other,the same as sector2 and sector3
2.2G-POST-BM
Long call;Short call;Ftp download;Ftp upload; Scanner(use TEMS13 test) Scanner select DCS1800:762-885;E900:10051013 MOS(use TEMS14 test) About Ftp_UL,youd better use 10MB or 25MB file to upload, if it upload failed,you should rename the upload file name.
Refer to Pre-BM,so you can know where signal is bad,where has event(like dropped call, handover failure,block call,etc.). When arrive there,you can stop recording.Pass through there,start recording. Make sure MS can receive good signal in the car
Attention:3G test
For 3G,you must lock WCDMA first. If you use W995 to test 3G-384DL and 384UL, you must select R99. If you do CQT(384DL,384UL), W995 is better qulity for DL/UL speed(first lock WCDMA,select R99). If device cant connet TEMS,the same as 2G
1.3G-SSV
DT:Long call; HSDPA need 1 K800i and 1 data card CQT: 384DL;384UL; HSDPA;HSUPA; Call Acessibility Check need 2 W995 or 2 K800i,1 data card
Call Acessibility Check: 2 MS lock on each carrier per sector and call each other,the same as SMS and video call
2.3G-POST-BM
Long call;Short call;Video long call;Video short call;384DL;384UL; HSDPA;HSUPA;CS_IRAT Test;PS_IRAT_Test; Scanner(need TEMS13 test) Mos(need TEMS14 test) Scanner select 10787,10812,10837 About 384UL/HSDPA,youd better use 900MB or 1GB file to upload; if it upload failed,you should rename the upload file name.
Refer to Pre-BM,so you can know where signal is bad,where has event(like dropped call, handover failure,block call,etc.). When arrive there,you can stop recording.Pass through there,start recording. Make sure MS can receive good signal in the car
MOS TEST
1.ACU(PESQ MOS equipment)
2.SONY W995
4.Audio Cable: black font AUDIO-L connet port:in/red font connet port:out)