Beruflich Dokumente
Kultur Dokumente
The BSC6800 Performance Management System can perform the measurement of RNC system performance, Iu interface, Iur interface, cell, CPU, SCCP, SAAL link, MTP3B DSP/link/link set, QAAL2, GTPU, neighboring cell, undefined neighboring cell
It is important for routine maintenance, fault handling, network optimization, network management
Page 2
Upon completion of this course, you will be able to: Describe the principle and basic concepts of BSC6800 performance management system Perform the operations of BSC6800 performance management system
Page 3
Page 4
Overview
BSC6800 performance management
It is used to collect and output the performance data of BSC6800 or the network through M2000 Reflects network performance Provides evidence for network maintenance and optimization System monitor and maintenance
Page 5
The performance management system consists of BSC6800 includes boards of various types, implements performance measurements under the control of M2000 reports the measured results to the M2000 M2000 works as the control center of the performance management system of BSC6800, and performs Functional Interfaces provides external interfaces for further development provides data interfaces for the network optimization tools of Huawei
BAM M2000 Server/ command Client Performance measurement module Collected data
Performance management
FAM board
Page 6
Set Ext and userdefined counters M2000 Report performance results for KPI counters M2000 Report performance results for Ext counters M2000
M2000
Page 7
Period for reporting performance measurement results Periodic measurement The host reports the measurement results periodically The M2000 supports the periodic measurement for multiple NEs at the same time Real time measurement The host reports the measurement results in a very short time The network performance data is collected based on the periodic measurement
Page 8
Object attribute
Who is to be measured Counter attribute
Page 9
It may be the physical board, the subrack, or the logical cell The type of performance measurement objects on the NE falls into the following three classes: For the first class of object type the measurement is performed on all instances of this type by default For the second class of object type you need to specify the measurement instance For the third class of object type you need to enter specific attributes of the instance The NE determines to which class of object type a performance measurement object belongs
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 10
Performance measurement counters are performance measurement objects specific Default counters The KPI counter refers to some important measurement counters defined by the NE The Ext counter refers to all other counters except the KPI counter Customer counter to form a new performance counter by adding, subtracting, multiplying and dividing the original counters Counter threshold define the value range of this counter
Page 11
Unlimited duration
Limited duration Performance measurement time
Page 12
Time segment determines the time segment in which the a performance measurement outputs measurement data on the measurement day
Page 13
Page 14
The prerequisite are as follows: You have obtained the network structure and performance measurement requirement You have obtained the performance measurement counters,
measurement
Page 15
Querying measurement results Measurement maintenance Measurement object setting Measurement counter setting Counter threshold setting Custom counters setting
Page 16
Thank You
www.huawei.com