Beruflich Dokumente
Kultur Dokumente
Training Manual
Inventory Number: 002678 1st Edition ANSYS Release: 12.0 Published Date: July 13, 2009
Registered Trademarks:
ANSYS is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers.
Disclaimer Notice:
This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review and Approval Procedures. This ANSYS Inc. software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains provisions concerning non-disclosure, copying, length and nature of use, warranties, disclaimers and remedies, and other provisions. The Program and Documentation may be used or copied only in accordance with the terms of that License Agreement.
Copyright 2009 SAS IP, Inc. Proprietary data. Unauthorized use, distribution, or duplication is prohibited. All Rights Reserved.
TOC-2
Contents
1. Introduction to FSI
Training Manual
2. One-way FSI
3. Immersed Solids 4. Moving Mesh
The chapters covered will depend on the applications of interest. In a 1-day training course there will not be sufficient time to cover all chapters and workshops.
ANSYS, Inc. Proprietary 2009 ANSYS, Inc. All rights reserved.
TOC-3
Prerequisites
Training Manual
Familiarity with the CFX Expression Language (CEL) is assumed Familiarity with ANSYS Parametric Design Language (APDL) is helpful
TOC-4
Technical Support
Training Manual
ANSYS, Inc. and ASDs provide a wide range of technical support, training, and consulting services.
Your Support Provider (ASD): ________________________
TOC-5
Training Manual
Visit the Customer Portal and select the Not yet a member? link to create an account
TOC-6
Manuals The manuals you have contain all of the material presented in the slides and the workshops
Training Manual
The files used during the workshops are available on request The lecture appendices contain additional useful topics that will generally not be covered during the training
TOC-7