Beruflich Dokumente
Kultur Dokumente
May 2004
Introduction
The Saudi Aramco Job Training Standard is the basis for training and certification of Saudi Aramco employees for the job of Inspector
Introduction
The AJTS specifies the job tasks which every Inspector in the company is expected to be able to perform, each task performed on the job
The standard to which each task must be performed is to meet the minimum requirements of the AJTS
Common Terms
Do What ?
Visually inspect a weld set up and the weld joint preparation
When?
Before the actual welding begins
With What ?
Weld set up, inspection tools, drawings, and welding procedures
How well?
To the applicable Saudi Aramco and Industry Standards
An Inspector performs inspections and records the results of those inspections according to the applicable standards.
1.00 Inspect Plant piping 2.00 Inspect Welds and Welding 3.00 Performing Paints and Coating
Inspections
4.00 Performing Inspection of Pressure Tanks 5.00 Performing Other Inspections 6.00 Maintaining Records and
Communications
An Electrical Inspector performs inspections and records the results of those inspections according to the applicable standards.
1.00 Performing Power Distributing Inspections 2.00 Inspecting Conduit and Cable Installations 3.00 Inspecting Conductors 4.00 Inspecting Groundings
A Civil/Plumbing Inspector performs inspections on Saudi Aramco civil installations and records results of those inspections according to the applicable standards.
1.00 Inspecting Earthwork 2.00 Inspecting Concrete 3.00 Inspecting Structures 4.00 Testing
8.00 Communication
An NDE Technician performs inspections on Saudi Aramco installations and records results of those inspections according to the applicable standards.
The following work conditions apply to the work of a plant and Equipment Inspector. These conditions apply during performance of most job tasks in this AJTS
Work Environment
An Inspector works in an office part of the time, but he works in the field most of the time
The primary tool of an inspector is the Saudi Aramco and Industry Standards. The second most important tool is the inspectors natural ability to note indications and deviations from the standards
Task Steps for Job Task 2.01 Inspect Weld Joint Preparation
Task Steps for Job Task 2.01 Inspect Weld Joint Preparation
Task Steps for Job Task 2.01 Inspect Weld Joint Preparation
Task Steps for Job Task 2.05 Monitor Post Weld Heat Treatment