Beruflich Dokumente
Kultur Dokumente
D2 - A
1. The center frequency of a band-pass filter is always equal to the A. Bandwidth B.3 dB frequency C. bandwidth divided by Q D. geometric average of the critical frequencies
2. A zero-level detector is a A. comparator with a sine-wave output B. comparator with a trip point referenced to zero C. peak detector D. limiter
4. Effect of noise in comparator circuits can be eliminated by _______ feedback. A. negative feedback B. positive feedback C. no feedback D. none of the above
5. Hysteresis is desirable in Schmitt-trigger, because A. energy is to be stored/discharged in parasitic capacitances. B. effects of temperature would be compensated. C. devices in the circuit should be allowed time for saturation and desaturation. D. it would prevent noise from causing false triggering.
6. The control terminal (pin5) of 555 timer IC is normally connected to ground through a capacitor (~ 0.01F). This is to A. protect the IC from inadvertent application of high voltage B. prevent false triggering by noise coupled onto the pin C. convert the trigger input to sharp pulse by differentiation D. suppress any negative triggering pulse
7. The time period T of square wave of astable multivibrator using op-amp is (a) RCln (1 + ) (b) 1
Rc ln 1
(c)
1 2 RC ln 1
(d) RC
9. The high frequency response in RC-Active filters using op-amp is due to A. BW B. Gain C. gain, BW product D. high frequency
fh 1 j f fh C .H ( j ) f 1 D.H ( j ) fh (1 ) f
B.H ( j )
1. The center frequency of a band-pass filter is always equal to the A. Bandwidth B.3 dB frequency C. bandwidth divided by Q D. geometric average of the critical frequencies
2. A zero-level detector is a A. comparator with a sine-wave output B. comparator with a trip point referenced to zero C. peak detector D. limiter
4. Effect of noise in comparator circuits can be eliminated by _______ feedback. A. negative feedback B. positive feedback C. no feedback D. none of the above
5. Hysteresis is desirable in Schmitt-trigger, because A. energy is to be stored/discharged in parasitic capacitances. B. effects of temperature would be compensated. C. devices in the circuit should be allowed time for saturation and desaturation. D. it would prevent noise from causing false triggering.
6. The control terminal (pin5) of 555 timer IC is normally connected to ground through a capacitor (~ 0.01F). This is to A. protect the IC from inadvertent application of high voltage B. prevent false triggering by noise coupled onto the pin C. convert the trigger input to sharp pulse by differentiation D. suppress any negative triggering pulse
7. The time period T of square wave of astable multivibrator using op-amp is (a) RCln (1 + ) (b) 1
Rc ln 1
(c)
1 2 RC ln 1
(d) RC
9. The high frequency response in RC-Active filters using op-amp is due to A. BW B. Gain C. gain, BW product D. high frequency
fh 1 j f fh C .H ( j ) f 1 D.H ( j ) fh (1 ) f
B.H ( j )