Beruflich Dokumente
Kultur Dokumente
HIMARK, CHINA
CONTENTS
1. General Introduction 2. Hardware Structure 3. Installation 4. PABX Configuration 5. DT333 Introduction 6. Operation
1. General Introduction
The KX-TDE100 converged architecture is extremely versatile, providing multiple options to meet the expansion needs of growing business. To increase the system capacity, the free slot design allows to add cards to accommodate additional extensions, Cos, or features, or can also expand the system by adding licenses to activate the systems built-in virtual IP ports. The converged architecture provides easy, cost-effective solutions to meet expansion needs, so the client can grow communications network without having to purchase a new system
Feature list 1
Feature list 2
2. Hardware Structure
A: RUN indicator B: ALARM indicator C: MNT port D: CTI port E: PSU slot F: Zero slot (without any card) G: Free slots (left1~6) H: TDEMPR slot I: RS2232 port
4
5 6 7 8 9
KX-TDA0177
KX-TDA0171 KX-TVM50 KX-TDE0111 KX-TDA0190 KX-TDA0161
pcs
pcs pcs pcs pcs pcs
1
1 1 1 1 1
LED indicator
Indicator BATT ALARM SD ACCESS 10BASEMNT 2 LINK T/100BASETX 100 Color Description
Red
Green Green
Battery alarm Off: normal On: alarm SD statue On: Is accessing Connection status Off: off line On: connection normal Flash: communication Data speed indicator Off:10 Mbps On: 100Mbps Connection status Off: off line On: connection normal Flash: communication Data speed indicator Off:10 Mbps On: 100Mbps
Yellow Green
CTI
1 LINK
100
Yellow
LED Indicator
Indicator
CARD STATUS
Color Description
Green / Red Off: power off Green on: normal Green flash :normal (one port is using) Red on: faulty (including reset) Red flash: stop
Description
RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP Reserved
Pin No.
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42-50
Description
TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP Reserved
Switch setting
switch Description
120/75 A/B 75 for BNC, 120 for RJ45 Using RJ45, A for CO, B for ext. Using BNC, just A
Port description
BNC TX
BNC RX
LED Indicator
Indicator
CARD STATUS
Color
Green/Red
Description
Off: power off Green on: normal Green flash :normal (one port is using) Red on: faulty (including reset) Red flash: stop Off: normal On: out-sync Off: normal On: alarm (slave clock) Flash: alarm (master clock) Off: normal On: alarm
SYNC-ERR RAI
Red Red
AIS
Red
SYNC
GREEN
D-LINK
Green
Indicator
Color
Description
Off: power off Green on: normal Green flash :normal (one port is using) Orange flash: inspect the PT port with CS Red on: faulty (including reset) Red flash: stop
Description
Reserved D2A Reserved D2B Reserved D2C Reserved D2D Reserved D2E Reserved D2F Reserved D2G Reserved D2H Reserved
Pin No.
26 27 28-29 30 31-32 33 34-35 36 37-38 39 40-41 42 43-44 45 46-47 48 49-50
Description
Reserved D1A Reserved D1B Reserved D1C Reserved D1D Reserved D1E Reserved D1F Reserved D1G Reserved D1H Reserved
Indicator
Color
Description
Off: power off Green on: normal Green flash :normal (one port is using) Red on: faulty (including reset) Red flash: stop
Description
RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP Reserved
Pin No.
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42-50
Description
TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP Reserved
LED Indicator
Indicator
Color
Description
Off: power off Green on: normal Green flash :normal (one port is using) Red on: faulty (including reset) Red flash: stop
3. Installation
3.1 Open/close the front cover Open the front cover
Step 1
Step 2
Step 3
Step 1
Step 3 Step 2
3.2 Grounding
PSU CARD
Step 2
Step 1
Step 3
Cable management
Step 1
Step 2
cable
terminal
Small plug
4. PABX Configuration
Via MNT port in TEEMPR card, Max. distance is 5m Note: PC need config. IP address
Step 1 insert SD
Step3 Power On
Note: after this operation, all the cards data are lost.
Color
Description Off: power off On: power on and run (link) Flash (slow): start-up Flash (fast): start-up or reset for without SD or switch on initialize Off: normal On: alarm (CPU stop) Flash: alarm (TDEMPR file error)
ALARM
Red
After configure all the big cards, we still configure the daughter cards.
If PC connect with PABX, then all the data will automatically load to PC from the equipment.
b. LCOT8 card
Only need set if CO connect then this as INS, if not this as OUS
c. CSLC16 card
d. DLC8 card
e. PRI30 card
Ring: all the phone in one group are ringing at same time. UCD: all the phone in one group is ringing one by one. Priority Hunting: all the phone in one group is ringing according to the Priority.
Call out
EXAMPLE
5. DT333 Introduction
setting
6. Operation
Easy dialing