Beruflich Dokumente
Kultur Dokumente
Console Connectivity
Rollover Cable
Computer
Console Connectivity
Connect a rollover cable to the router console port (RJ-45 connector). Connect the other end of the rollover cable to the RJ-45 to DB-9 adapter Attach the female DB-9 adapter to a PC Serial Port. Open emulation software on the PC.
Emulation Software
WINDOWS Start Programs Accessories Communications HyperTerminal HyperTerminal. Give the Connection Name & Select Any Icon
LINUX # minicom -s
Console Connectivity
Con 0 E0
LAN - 192.168.1.0/24
5
System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by cisco Systems 2500 processor with 2048 Kbytes of main memory Notice: NVRAM invalid, possibly due to write erase. F3: 5575260+78596+410108 at 0x3000060
Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Mon 30-Sep-02 20:43 by srani Image text-base: 0x0302EA54, data-base: 0x00001000
Cisco 2500(68030)processor(revision N) with 2048K/2048K bytes of memory.
Processor board ID 11169613, with hardware revision 00000001 X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY)
--- System Configuration Dialog --Would you like to enter the initial configuration dialog? [yes/no]: n
7
Press RETURN to get started! 00:00:20: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up 00:00:20: %LINK-3-UPDOWN: Interface Serial0, changed state to down 00:00:20: %LINK-3-UPDOWN: Interface Serial1, changed state to down 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to up 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down 00:12:43: %LINK-5-CHANGED: Interface Ethernet0, changed state to administratively down 00:12:43: %LINK-5-CHANGED: Interface Serial0, changed state to administratively down 00:12:43: %LINK-5-CHANGED: Interface Serial1, changed state to administratively down 00:12:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to down 00:12:46: %SYS-5-RESTART: System restarted
8
Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Mon 30-Sep-02 20:43 User by srani Mode enable Router> Privileged Mode : Commands : password Setting Telnet Router# configure terminal : Commands : ping, telnet, trace route, Router(config)# vty 0 4 enable Enter configuration commands, line one per line. End with CNTL/Z. Globalreload, Configuration show, copy, write, erase Mode Router(config-line)# hostname Hyderabad login Router(config)# : Commands : configure terminal Hyderabad(config)# interface Ethernet 0 Router(config-line)# password <password> Settinghostname, Console password interface, Interface ip address 192.168.1.150 Mode 255.255.255.0 Hyderabad(config-if)# Router(config)# line con 0 enable password, enable : Commands : secret Hyderabad(config-if)# no shut Router(config-line)# login ip address, encapsulation, no exit Hyderabad(config-if)# Configuring Ethernet interface shut clock rate Router(config-line)# password <password> line vty 0 4 Hyderabad(config)# Router(config)# interface Ethernet <number> Hyderabad(config-line)# login Router(config-if)# address <address><mask> password ip zoom Hyderabad(config-line)# Router(config-if)# no shutdown exit Hyderabad(config-line)# Hyderabad(config)# line con 0 Hyderabad(config-line)# login Hyderabad(config-line)# password ccna
9
Hyderabad(config-line)# exit Hyderabad(config)# enable password cisco Hyderabad(config)# enable secret zoom Hyderabad# show startup-config Setting the Enable password %% Non-volatile configuration memory is not present Router(config)#enable password <password> Hyderabad# copy running-config startup-config Router(config)#enable secret <password> Building configuration..... [OK] Hyderabad# show running-config
Building configuration ..... Current configuration: ! version 12.1 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Hyderabad --More-10
! hostname Hyderabad ! ! ! no ip routing ! interface Ethernet0 ip address 192.168.1.150 255.255.255.0 ! interface Serial0 no ip address shutdown ! interface Serial1 no ip address shutdown ! no ip classless ! line con 0 login password ccna line aux 0 --More-11
! line vty 0 interface login Serial0 no ip address password zoom shutdown ! end interface Serial1 Hyderabad# show version no ipInternetwork address Cisco Operating System Software shutdown IOS (tm) 2500 Software (C2500-JS-L),Version 12.1(17),RELEASE SOFTWARE ! Copyright (c) 1986-1999 by cisco Systems, Inc. no ip classless Compiled Mon 04-Jan-99 17:27 by ashah Image text-base: 0x03040148, data-base: 0x00001000 ! line con 0 ROM: System Bootstrap, Version 11.0(10c), SOFTWARE login BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), password ccna RELEASE (fc1) line auxSOFTWARE 0 ! Hyderabad line vty 0uptime is 1 hour, 28 minutes System login restarted by power-on System image file is "flash:/c2500-ipx-ip.bin", booted via flash password zoom --More-end
12
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) Hyderabad uptime is 1 hour, 28 minutes System restarted by power-on System image file is "flash:/c2500-ipx-ip.bin", booted via flash Cisco 2500(68030)processor(revision N) with 2048K/2048K bytes of memo Processor board ID 11169613, with hardware revision 00000001 X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102
Hyderabad#
13
Hyderabad#
14