Beruflich Dokumente
Kultur Dokumente
Prashant Sisodiya
Engine Layout
Overall Dimensions
Intake System
Exhaust System
Lubrication System
Fuel Circuit
The petrol feed pump will be supplied in loose condition. Petrol
Use of feed pump will allow locating fuel tank at bottom portion of vehicle with negative head.
This will ensure the continuous flow of fuel to engine as and when demanded which is essential for good performance of vehicle. This also will ensure better safety during fuel filling operation, since fuel spilt will not be on the vehicle hot or electrical parts. The spillage tray can be eliminated and better packaging is possible.
Filter
Electric Feed Pump
Modifcations in Engine
At Lombardini, continuous improvement in products through R&D is carried out for end customer delightment. Following are major modifications in LGA340 engines are made.
Special Instruction
Before carrying any welding activity, ensure spark plug cable removed and remove Battery terminal cables. This will prevent burning of wiring harness and HT Coil.
Do not tamper Engine Intake System including Air Filter & its Position. Tampering Intake system will reduce power and may yield in misfiring during vehicle retardation.
In case, if the silencer position need to be modified because of packaging constraints, ensure back pressure does not exceed 450 mm of Water Column. Fill the measured quantity of luboil from the Rocker Cover Filling Cap, wait for 10 minutes to allow oil to reach bottom portion in crankcase and then measure the level. If necessary, drain the excess oil by loosening side drain plugs. Luboil level must be between lower and upper mark of Dipstick. Level to be checked when vehicle on horizontal road. Fuel Pipes to be used should be of good quality petrol hoses.
Thanks!
Contact Details:
Devendra Nene email : dnene@lombardini.it Mobile : 9922504064 Prashant Sisodiya email : psisodiya@lombardini.it Mobile : 9922504066