Beruflich Dokumente
Kultur Dokumente
Id No:10.01.03.049
Course teachers: Munshi Galib Muktadir Sabreena Nasrin
PRESENTATION OUTLINE
Definition Of Slab
Definition Of One-Way Slab Deflection Design Concept Minimum Thickness Of One-Way Slab Load Assigned To Slabs Temperature And Shrinkage Reinforcement Temperature And Shrinkage Reinforcement Ratio Design Procedure
11/25/2013
DEFINITION OF SLAB
Layer of reinforce-concrete with uniform/variable thickness supported by restraints Figure:
11/25/2013
11/25/2013
11/25/2013
11/25/2013
DEFLECTION
11/25/2013
DEFLECTION
11/25/2013
DESIGN CONCEPT
For the purpose of analysis and design, a unit strip of a slab is cut out at right to the supported beams.
11/25/2013
10
One-way Slab
L/20
L/24
L/28
L/10
L is the span length direction of bending. If Wc 90 120 psf factor will be applied by ( 1.65-0.005Wc) If Fy 60 ksi factor will be ( 0.4 + Fy/100000)
11/25/2013
11
11/25/2013
12
11/25/2013
13
14
TEMPERATURE AND
SHRINKAGE REINFORCEMENT
Concrete gets shrinks and results cracking
Cracks known as Hairline cracks. provide special reinforcement for shrinkage and temperature contraction in the direction perpendicular to the main reinforcement. Maximum lateral spacing 5h or 8
11/25/2013
15
11/25/2013
16
DESIGN PROCEDURE
Step-1: From given panel find out the Tmin. Step-2: Find out the Factored Load.(Wu = 1.2*DL + 1.6*LL) Step-3: Find out Moments of the panel. (M = Moment Coefficients*Wu*L) Step-4: Find out maximum steel ratio (max = 0.85*1*(fc/fy)*(u/ u + 0.004) Step-5: Find dreq. ( ) Step-6: As and a. ( ) Step-7: Temperature and shrinkage reinforcement Step-7: Reinforcement Detailing. 11/25/2013
17
REINFORCEMENT DETAILING
18
REINFORCEMENT DETAILING
11/18/2013
19
THANK YOU
11/25/2013
20