Beruflich Dokumente
Kultur Dokumente
The body of a solar car is designed with two primary goals: providing a large top surface area for
mounting solar cells, and being as aerodynamic as possible. Solar cars often have a smooth,
wing-like shape ( aerofoil shape ) and covered wheels, which helps reduce aerodynamic drag.
INNOVATION
Explanation Of Chosen Ratio Gear
The faster the axle rotates in the bearing the more friction
and drag it will have. A large wheel will allow the axle to
rotate more slowly (if the car is to go at the same speed),
and will waste less power in the bearings.
INNOVATION
REASON OF THE SUBSTANCE WE CHOSED:
Our solar car is build using a bottle since bottle is a light
substance which is potential to make the solar car moves
faster and have a smooth body shape that makes the solar car
more aerodynamic. It is also an easy to get substance and
recycled.
Our tires were made out of rubber because it has
smooth surfaced to reduce the friction.
MODELING DESIGN
Specific explanation of solar car model :
Height: 8.5cm
Width: 8cm
Weight: 500g
Tyre diameter:3.5cm (back wheel) 3cm (front wheel)
DATE TIME LIGHT
INTENSITY
SPEED
15/4 10.35 AM LOW 0.1m/s
17/4 12.45 PM HIGH 0.4m/s
19/4 4.35 PM MODERATE 0.2m/s