Sie sind auf Seite 1von 20

Voice Over IP

Chapter 4

Cisco Voice Hardware


Type of Devices
Cards NM
Type of Devices
Cards NM

Data Voice
Type of Devices
Cards NM

Data Voice Data VNM


Type of Devices
Cards NM

Data Voice Data VNM

WIC 1T
WIC 2T
Type of Devices
Cards NM

Data Voice Data VNM

WIC 1T Digital Analog


WIC 2T
Type of Devices
Cards NM

Data Voice Data VNM

WIC 1T Digital Analog


WIC 2T FXS
MFT
FXO
E&M
Type of Devices
Network Module

Data VNM
Type of Devices
Network Module

Data VNM

NM-4T
NM-4 BRI
(S / T )
Type of Devices
Network Module

Data VNM

NM-4T
Digital Analog
NM-4 BRI
(S / T )
Type of Devices
Network Module

Data VNM

NM-4T
Digital Analog
NM-4 BRI
(S / T )

NM-HDV
Type of Devices
Network Module

Data VNM

NM-4T
Digital Analog
NM-4 BRI
(S / T )

NM-HDV NM-1V
NM-2V
NM-HDA
Cisco Voice Products

 Data/Voice Integration Access Multiservice Routers.


 Cisco 1750 Series
 Cisco 2600 Series
 Cisco 3600 Series
 Data/Voice Integration Multiservice Routers.
 Cisco MC3810 Series
 Cisco AS5300
Cisco Voice Products

 Large scale Data/Voice Integration


Multiservice Routers.
 Cisco 7200
 Cisco 7500
 Cisco AS5800
Cisco 1750 Series
Cisco 1750 Series
Cisco 1750 Series
Connector/Sl Label/Color Description
ot

Ethernet port 10/100-Mbps Router connection to the local Ethernet network. This port
ETHERNET autosenses the speed (10 or 100 Mbps) and duplex mode (full
(yellow) or half) of the device to which it is connected and then operates
at the same speed and in the same duplex mode.

Auxiliary AUX Modem connection for remote configuration using Cisco IOS
port (black) software.

Console port CONSOLE Terminal or PC connection for local configuration using


(light blue) Cisco IOS software.
Cisco 1750 Series
WIC/VIC slot SLOT 0 Supports either a Cisco WIC or VIC. For detailed information, refer to
the Cisco WAN Interface Cards Hardware Installation Guide that
comes with every card.
WIC/VIC slot SLOT 1 Supports either a Cisco WIC or VIC. For detailed information, refer to
the Cisco WAN Interface Cards Hardware Installation Guide that
comes with every card.
VIC slot SLOT 2 Supports one Cisco VIC. For detailed information, refer to the
Cisco WAN Interface Cards Hardware Installation Guide that comes
with every card.
Power +5, +12, -12 Router connection to the external power supply.
socket VDC

Protective Ground Router connection to earth ground by using a green and yellow 14
earth wire AWG ground wire.
Cisco 2600 Series
Cisco 2600 Series
 A WIC in each WIC slot (containing interface Serial 0/0 in
physical slot W0, and interface
Serial 0/1 in physical slot W1)

 • A 4-serial-port network module in slot 1 (containing the


following ports: Serial 1/0, Serial 1/1, Serial 1/2, and Serial 1/3)

 • First built-in Ethernet interface—Ethernet 0/0

 • Second built-in Ethernet interface—Ethernet 0/1, or optionally


in Cisco 2612 and Cisco 2613 only: Token Ring interface 0/0

Das könnte Ihnen auch gefallen