Sie sind auf Seite 1von 23

Telefnica Mviles Espaa

UMTS
(Universal Mobile Telecommunications
System)

2
What is UMTS?
UMTS is one of the major new 'third generation' (3G)
mobile communications systems being developed within
the framework defined by the ITU and known as IMT-2000.
UMTS will enable the wireless Information Society,
delivering high-value broadband information, commerce
and entertainment services to mobile users via fixed,
wireless and satellite networks.
UMTS will speed convergence between
telecommunications, IT, media and content industries to
deliver new services and create fresh revenue-generating
opportunities.
3
UMTS advantages
Always-on
Personalised
Location aware
Real-time and flexible
Greater range of enriched multimedia services
Higher data rates for a greater number of users
Lower costs in long-term because of network
efficiencies
IP transport in access and core networks
Separation of control and transport functionalities
IP multimedia services for mobile devices
4
Telecommunications
Mobility
Circuit switching services
Packet switching services
UMTS
Internet
Internet access
E-mail
Real-time images transfer
Multimedia documents transfer
Contents
Video on-demand
Interactive video services
Radio and television
Entertainment services
Location based services

Convergence of media, data &
telecom
5
A new value chain
MOBILE
PORTAL
MOBILE
NETWOR
K
OPERAT
OR
SERVICE
S
PROVIDE
R
CONTENTS
PROVIDER
MOBILE
INTERNET
PROVIDER
Where will be
each one?
6
UMTS services forecast
Simple and rich voice
Location Based Services
Business and consumer MMS
Mobile Internet Access
Mobile Intranet/Extranet Access
Customised Infotainment

7
UMTS General Architecture
UMTS basic architecture is split into:
User equipment (UE): Equipment used by the user
to access UMTS services.
Infrastructure: Physical nodes which perform
several functions required to terminate the radio
interface and to support the telecommunications
services requirements of the users.
8
Node
B
UTRAN
UMTS Basic Architecture Release
99
GMS
C
HLR
PSTN/ISD
N
BTS
GSM
BSS
RNC
BSC
MSC/VL
R
SGSN
Circuit Domain
Packet Domain
INTRANE
TS
GGS
N
Other
PLMN
INTERN
ET
Radio Access
Network
Core Network
MS
UE
M
E
M
E
9
UMTS architecture Release 99 is an evolution of
GSM/GPRS system, with a new radio interface based on
WCDMA technology, that allows to offer new services with
high capacity.
Despite UMTS radio access network is new, UMTS core
network is similar to GSM/GPRS core network.
UMTS core network is split into two different switching
domains:
Circuit switching (CS): Based on GSM model.
Packet switching (PS): Based on GPRS model.
UMTS Basic Architecture Release
99
10
User Equipment Domain
The user equipment is sub-divided into:
Mobile Equipment Domain (ME): Performs radio
transmission and contains applications. It consists of:
Mobile termination (MT): Radio transmission and related
functions.
Terminal Equipment (TE): Contains end-to-end
applications.
User Identity Module Domain (USIM): Contains
data and procedures which unambiguously and
securely identify itself.
USIM
UE
MT
TE
ME
11
Infrastructure Domain
The Infrastructure Domain is split into:
Access Network Domain: Consists of the physical
entities which manage the resources of the access
network and provides the user with a mechanism to
access to Core Network Domain. In UMTS the
access network is the UTRAN (Universal Terrestrial
Radio Access Network).
Core Network Domain: Consists of the physical
entities which provide support for the network
features and telecommunications services.
12
Node B
Access Network Domain -
UTRAN
UTRAN (Universal Terrestrial Radio Access Network) is the radio access
network in UMTS.
UTRAN consists of a set of Radio Network Subsystems (RNS)
connected to Core Network.
A RNS consists of the Radio Network
Controller (RNC) and one or more Node Bs.
Each RNS is responsible for the resources of
its set of cells.
RNC is responsible for the handover decisions
that require signalling to the UE. It is equivalent
to BSC in GSM network.
Node B is responsible for radio
transmission/reception in one or more cells
to/from UE. It is equivalent to BTS in GSM
network.

RNC
RNC
Node B
RNS
13
Spectrum allocation in Europe
UMTS satellite
1850 1900 1950 2000 2050 2100 2150 2200 2250
15 20 60 30 15 60 30
MHz
GSM 1800 and DECT
UMTS FDD
20/35 MHz
for UTRA unpaired
2 x 60 MHz
for UTRA paired
UMTS
TDD
UTRA: UMTS Terrestrial Radio
Access
TDD: Time Division Duplex
FDD: Frecuency Division Duplex
A Node B can support FDD mode, TDD mode or dual-mode
operation.
14
Radio access technology - WCDMA
Wideband Code-Division Multiple-Access (W-CDMA) is one
of the main technologies for the implementation of third-
generation (3G) cellular systems.
W-CDMA is based on CDMA, a digital multiple access
technique specified by the Telecommunications Industry
Association (TIA) as "IS-95.
In W-CDMA interface different users can simultaneously
transmit at different data rates and data rates can even vary in
time.
The radio access scheme is direct-sequence CDMA with
information spread over a bandwidth of about 5 MHz with a
chip rate of 3.84 Mcps. Modulation is dual-channel QPSK.
15
CDMA Technology
CDMA (Code-Division Multiple-Access) is a "spread spectrum"
technology, which means that it spreads the information
contained in a particular signal of interest over a much greater
bandwidth than the original signal.
With CDMA, unique digital codes, rather than separate RF
frequencies or channels, are used to differentiate subscribers.
The codes are shared by both the mobile station (cellular
phone) and the base station, and are called "pseudo-Random
Code Sequences." All users share the same range of radio
spectrum.
Because of the wide bandwidth of a spread spectrum signal, it is
very difficult to jam, difficult to interfere with, and difficult to
identify.
16
Benefits of CDMA
Capacity increase.
Improved call quality, with better and more consistent
sound.
Simplified system planning through the use of the
same frequency in every sector of every cell.
Enhanced privacy.
Improved coverage characteristics, allowing for the
possibility of fewer cell sites.
Increased talk time for mobile devices.
Bandwidth on demand.
17
Core Network Domain
The Core Network Domain consists of the physical
entities which provide support for the network features
and telecommunications services. The support provided
includes functionality such as:
Management of user location.
Control of network features and services.
Transfer (switching and transmission) mechanisms for
signalling and user generated information.
18
The Core Network Domain is sub-divided into:
Serving Network Domain: Represents functions that are local
to the users access point and thus their location changes when
the user moves. It is responsible for routing calls and for the
transport of user data/information from source to destination.
Home Network Domain: Represents functions that are
conducted at a permanent location regardless of the location of
the users access point. It contains at least permanently user
specific data and is responsible for management of subscription
information.
Transit Network Domain: It is located on the communication
path between the serving network domain and the remote party.

Core Network Domain
19
UMTS security architecture
UMTS security architecture consists of the security features and
security mechanisms that assure the confidentiality, integrity,
authentication and anti-replay protection.
Five security features are defined:


Network access security (I): Provides users with secure access to UMTS
services, and which in particular protect against attacks on the (radio) access
link.
Network domain security (II): Enables nodes in the provider domain to
securely exchange signalling data and protect against attacks on the wireline
network.
User domain security (III): Secures access to mobile stations.
Application domain security (IV): Enables applications in the user and in
the provider domain to securely exchange messages.
Visibility and configurability of security (V): Enables the user to be
informed if a security feature is in operation or not.

20
UMTS launching in TME
1 June 2002: Technical launching
750 base stations have been installed in 21 Spanish
cities (16 cities with more than 250000 inhabitants +
4 cities of interest).
Network equipment suppliers (Circuit Switching):
Nortel and Ericsson.
Technical tests of basic services over the network.
21
Second semester 2003: Commercial launching
The degree of madurity of 3G technology and the
standardization of operating platforms and systems will
determine the commercial launching of services.
Besides it mainly depends on the availability of
terminals.
The proposed basic packet of services consists of:
Voice transmission
Circuit-switching data transmission (64 kbps)
Packet-switching data transmission (64 kbps)
Handover (UMTS)
UMTS launching in TME
22
Links
3GPP
www.3gpp.org

UMTS Specifications
http://www.3gpp.org/ftp/Specs

UMTS Forum
www.umts-forum.org

Das könnte Ihnen auch gefallen