Beruflich Dokumente
Kultur Dokumente
V600R009 (GSM)
www.huawei.com
Network Typology
The Nastar is located in the distributed Client/Server network and is connected to the M2000.
GSM
Neighboring Cell
Analysis
GSM Frequency
Analysis
GSM MR Analysis
GSM Uplink
Interference
Analysis
GSM Complaint
Analysis Support
Page 2
Page 3
Performance Data collection task and GSM Performance Data import task maybe have been
created. This is need to be done just one time.
Copyright 2009 Huawei Technologies Co., Ltd. All rights reserved.
Page 4
Page 5
Page 6
Period: This indicates the interval when the Nastar measures the frequencies
in each group. The value is any integer ranging from 1 to 48 (1 and 48 are
included). The unit is *15 (minute). That is, the period is a integer times of 15
minutes.
Page 7
1~20
Period
115 minutes
Measure step
1,2,3,4,5,6
6,7,8,9,10
test cell
List of Frequencies in the BA2 Table in
Test Cell A1
10:00~10:15
1,2,3,4,5,6
1,2,3,4,5,6,7,8,9,10
10:15~10:30
1,2,3,4,5,6,7,8,9,10
6,7,8,9,10
10:30~10:45
1,2,3,4,5,6,11,12,13,14,15
6,7,8,9,10,11,12,13,14,15
10:45~11:00
1,2,3,4,5,6,16,17,18,19,20
6,7,8,9,10,16,17,18,19,20
11:00~11:15
1,2,3,4,5,6
1,2,3,4,5,6,7,8,9,10
11:15~11:30
1,2,3,4,5,6,7,8,9,10
6,7,8,9,10
11:30~11:45
1,2,3,4,5,6,11,12,13,14,15
6,7,8,9,10,11,12,13,14,15
11:45~12:00
1,2,3,4,5,6,16,17,18,19,20
6,7,8,9,10,16,17,18,19,20
Time
Page 8
Configurable parameters
mentioned in the
functional principle
Page 9
Page 10
Page 11
Perform frequency optimization for some key cells after frequency planning on
the entire network.
Perform frequency optimization for cells with poor network quality or VIP cells.
Output the interference matrix to be used by other tools for frequency analysis.
Page 12
Interference of the
neighboring cell on
the service cell:
Co.PIT of the
neighboring cell
reported in the SC
measurement result
There are two matrixes on the GSM, namely, intra-frequency interference matrix and neighboring cell interference matrix.
Page 13
Page 14
Information about
created tasks and
task status
Page 15
Traffic interference of
neighboring cell on the
selected test cell
Page 16
Page 17
Page 18
Page 19
Page 20
Start
Create an assistant analysis support task
View the complaint analysis support result
End
Page 21
Location where
the complaint
occurs
Information about
the subscriber
who complains
Supported analysis task type: GSM complaint analysis type, GSM/UMTS complaint analysis type, and GSM/TD-SCDMA
complaint analysis type
Supported location where the complaint occurs: complaints support analysis at cell level, RNC level, and inter-OSS network
management systems
Supported subscriber who complains: The Nastar takes the IMSI or the peer number as the communication ID of the
subscriber who has complaints in the wireless network.
The Nastar provides the complaint analysis support of a maximum of 2000 subscribers.
Supported analysis time range: The Nastar supports the analysis of subscriber complaints generated in the past seven days.
Page 22
Page 23
Page 24
Tip: The function is used together with the neighboring cell, MR,
frequency, and uplink interference analysis functions to improve
the efficiency of solving subscribers' complaints.
Page 25
Page 26
Page 27
Frequency
of the
current cell
Information about
created tasks and task
status
Interference strength
threshold
Frequency type
Page 28
The following figure shows the frequency signal strength of all cells under the selected BSC or
cell group. Select a frequency signal record from the list, then click GSM Cell Uplink
Interference Analysis on the left navigation tree or right-click the record and choose GSM
Cell Uplink Interference Analysis to view the counters corresponding to the frequency.
Page 29
Page 30
GSM MR Analysis
Page 31
Page 32
Information
about created
tasks and task
status
Page 33
Step3:
MR overview report: concerning all BSCs
MR query: concerning specified cell
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40