Sie sind auf Seite 1von 15

Fiber Optics in High Voltage

Transmission Environments
EE 566
By: Jason Jones

October 8, 2003

My Reason for Choosing This


Topic
Find a Combination Between Fiber Optics
and Power Engineering
This is looking at Fiber Optics in an
alternative industry

Fig. 1

Fig. 2

Overview
1. Basics of fiber optic and electrical
transmission lines
2. Different uses of fiber optic cable in the
transmission grid system
3. Employment options
4. Conclusion/summary

Can high voltage electricity be


sent through fiber optics cable?
No conclusive evidence or
research has shown that it is possible.
Only the use of converters, still not
practical for long distances and high
voltage.

Why use fiber optics with


transmission lines?
Sensing and detection of electrical faults and
failure(i.e Supervisory Control and Data
Acquisition Systems S.C.A.D.A)
Can be used as a neutral or ground.
No EMC/EMI issues.
Communication between plants and substations
Extensive ROW (Right Of Way). The cost
advantages of existing ROW makes utilities
attractive line-leasing partners for many
communications carriers.

Combination of Two
Different Concepts
Fiber optic cables
1. Transmits light
(photons)
2. Primarily for
communications

Electric cables
1. Transmits
electricity
(electrons)
2. Primarily for
powering electrical
devices

Most commonly used Fiber Optic


All Dielectric Self Supporting (ADSS)
Wrap type
Optical Ground Wire (OPGW)

Details of ADSS Cables


High fiber count
Cheaper than OPGW
Installed along
electrical transmission
lines

Fig. 3

Details of the OPGW


OPGW is a composite
wire which serves as a
conventional overhead
ground wire, with the
added benefit of
providing highcapacity and reliable
fiber optic
communication.
Fig. 4

Common Problems
Contamination fertilizer, pesticides, exhaust, emissions, salt
fog. Can only be solved on the design level, difficult because of high
voltage design requirements

Space Potential Electrical potential induced on fiber optic


cables

Dry Band Arcing Caused by the induced current during wet


conditions

Space Potential
Induced voltages can
be in the tens of kV
range.
Causes dry-band
voltages and currents.
Causes huge and
powerful electric
fields.
Fig. 5

Dry Band Arcing


Caused by Space
Potential and
frequency of current in
the cable.
Accurse in wet
environments
Because of high
induced voltage,
current can be as low
as 1.5mA.

Fig. 6

Employment Options
Phillips
Corning
Fiber Planners
The Furukawa Electric Co.
Most power utility companies (i.e. National
Grid, Alliant Energy, Duke Energy)

Conclusion/Summary
Many research possibilities.
Very interesting employment.
Good chance of becoming an expert.
High Voltage BE CAREFUL

References
Electrical Design Parameters of All-Dielectric-Self-Supporting Fiber Optic
Cable, M.W. Touminen and R.G Olsen, IEEE Transactions on Power
Delievery, Vol. 15, No. 3, July 2000
Corona Caused Deterioration of ADSS Fiber-Optic Cable on High Voltage
Lines, G.G Karady, G. Besztercey, IEEE Transactions on Power Delievery,
Vol. 15, No. 3, October 1999
Sensor Design for Leakage Current Measurement on ADSS Fiber-Optic
Cable, G.G Karady, Q, Huang, M.R Hernandez, D. Srinivasan, IEEE 2001
www.phillips.com
www.pirelli.com
www.controlbylight.com/build/app-nosts/casestudy_hoosier.html
www.navy.mil
www.fiberplanners.com
http://www.sei.co.jp/products_e/illustrated/opgw_e.htm

Das könnte Ihnen auch gefallen