Sie sind auf Seite 1von 19

We Can Discuss In It

WHAT IS RAM
HOW IT CAN WORK
TYPE OF RAM
RAM (random access memory) also called
main memory consist of memory chips that
Can be read from and written to by the
processor and other devices.
1.When you start the computer certain operating system
files are loaded into RAM from the hard disk. The
operating system display the user interface on the screen.
2.When you start a paint program and web browser
program the program’s instruction are loaded into RAM
from hard disk.the
3.When you quit a program such as a web browser,its
instruction s are removed from RAM.The web browser no
longer is display on the screen.
 THERE ARE 12 TYPE OF RAM
 Static Random
Access Memory
(SRAM) uses
multiple
transistors,
typically four to six,
for each memory
cell but doesn't
have a capacitor in
each cell. It is used
primarily for cache
Synchronous
Dynamic Random
Access Memory
(SDRAM) takes
advantage of the
burst mode
concept to greatly
improve
performance
Dynamic ram chips must be re-energized
constantly or lose their of contents.
Many variations of Dram chips are exist
most of which are faster then basic
Dram.
 Double data rate RAM chips are even
faster then SDRAM chips because they
transfer data twice for each cycle instead
of once.
 DIFFRENCE BETWEEN DD2 AND DDR3
RAM chip usually reside on a memory
module which is a small circuit board.
There are three memory module
SIMMS
DIMMS
RIMMS
SIMMs
single inline memory module
DIMMs
Dual inline memory module
RIMMs
Rambus inline memory module
WHAT IS ROM
HOW IT CAN WORK
TYPE OF ROM
read-only memory
(computer science)
memory whose
contents can be
accessed and read
but cannot be
changed to.
ROM contains the programming that allows your
computer to be "booted up" or regenerated each time
you turn it on. Unlike a computer's random access
memory (RAM), the data in ROM is not lost when the
computer power is turned off. The ROM is sustained
by a small long-life battery in your computer
There are four basic ROM types
 PROM

 EPROM

 EEPROM
  Prom
(Programmable
Read Only Memory)
is a form of digital
memory where the
setting of each bit is
locked by
a fuse or antifuse.
Such PROMs are
used to store
programs
permanently
EPROM (erasable
programmable
read-only memory)
is programmable
read-only memory
(programmable
ROM) that can be
erased and re-
used.
EEPROM (electrically
erasable programmable
read-only memory) is
user-modifiable read-
only memory (ROM) that
can be erased and
reprogrammed
repeatedly through the
application of higher
than normal electrical
voltage
 ANY QUESTION PLEASE
 I AM HERE TO ANSWER YOUR
QUESTIONS

Das könnte Ihnen auch gefallen