Beruflich Dokumente
Kultur Dokumente
03/13/15 05:37 PM
COMB SORTER
SPECIFICATIONS
Acrylic Transparent sheet
:
Fiber Mounting Templates
:
Net Weight of the Unit
:
Overall Dimensions of the Unit :
03/13/15 05:37 PM
6 X 8 X 2 peaces, 3 X 8 X 2 Pcs.
6 X 8 X 2 peaces, 3 X 8 X 2 Pcs.
3.680 Kg.
125(W) X 220(L) X 110(H)
3
03/13/15 05:37 PM
03/13/15 05:37 PM
Digital Microscope
5x,10x,20x,40x & 100x lenses monocular projection microscope with
fibre cross section kit, high resolution CCD camera and imaging
software with measurement facilities. Scope of use cross section of
fibre or yarn, analysis of any fibre, yarn and fabric.
03/13/15 05:37 PM
To check the twist of yarn. Test length 50 mm, 100 mm, 150 mm, 200 mm.
03/13/15 05:37 PM
10
11
03/13/15 05:37 PM
12
Beeseley Balance
To check Count or Denier of the short samples.
Sizing Template
:
Sizing Template Counts System :
Overall Dimension of the Unit
:
03/13/15 05:37 PM
01 No.
05 System
545 (L) X 128 (W) X 198(H)
13
03/13/15 05:37 PM
14
03/13/15 05:37 PM
15
03/13/15 05:37 PM
16
03/13/15 05:37 PM
17
03/13/15 05:37 PM
:76(L)cmx30(W)cmx8cm(H)
:800gms.
18
03/13/15 05:37 PM
:
:
0-1000 gm..
200 gm.
19
20
: As per requirements
: 250 ml x 12 Beakers
: At 22 rpm. ( 2 rpm.)
03/13/15 05:37 PM
21
22
SPECIFICATIONS:
Inner dimensions of the Main Bath:
450 X 410 X 295 mm
Capacity (in litres) of Main Bath :
29 Litres (Approx.)
Number of Beakers (Test Vessels) :
08 Nos.Leak-proof Beakers with Gaskets
Standard Seal for Beakers
:
08 Nos. Special Neoprene Gaskets
Volume of each Beakers
:
55050 ml.
Distance from Shaft
:
4510 mm
Speed of Rotation
:
402 rpm
Temperature Controller
:
DIGITAL
Temperature Regulation
:
PT-100 with 2.0C (As Per I.S.O.)
Timer (Digital)
:
0-99 Minutes
Motor
:
Single Phase, Geared Motor0 ~ 230 Volts AC, 50 Hz.
Overall Dimensions of the unit (without S. S. Stand):
710 x 570 x 785 mm
Overall Dimensions of the unit (With S. S. Stand) :
720 x 590 x 1140 mm
Net Weight of the Unit (Without S. S. Stand)
:
63.5 Kg
Net Weight of the Unit (With S. S. Stand)
:
81.5 Kg.
As per standards : ISO 105, BS 1006:1990, AATCC 61 (TEST 1 A ONLY),BS EN 20105,MARKS & SPENCER C4, C5 and
,37
03/13/15 05:37 PM
23
03/13/15 05:37 PM
24
GSM Cutter
The unit is recommended for yield testing i.e. the determination of weight per
unit area. The sample cutter cuts out rapidly and accurately circular
specimen of 100 Cm2, which is exactly 1 / 100th of a square meter. The result is
grams, multiplied by 100, gives the GSM (Grams per square meter)
DIRECTLY.
Free Pocket weighing scale with G.S.M. cutter.
Grammes per Square Meter = Specimen Weight in Grams x100
03/13/15 05:37 PM
25
Stiffness Tester
Angle of inclination of intersecting plane to horizontal
:
41.50
Load on test specimen
:
10 + 2 gm / cm length
Over All Dimensions of the Instrument
:
271(W)x148(D)x200(H)
Net Weight of Instrument
:
4.500 Kgs.
03/13/15 05:37 PM
26
ABRASION
PILLING
No. Of specimens
1-4
1-4
6.45 cm2
6.45 cm2
9 kPa (apparel)
12 kPa (upholstery)
47+2.5 r/min.
47+2.5 r/min.
32.30
32.30
60.5+0.5 mm
24.0+0.5 mm
+0.05 mm
+0.05 mm
03/13/15 05:37 PM
27
SPECIFICATIONS :
Size of Wooden Boxes (Inside)
Thickness of Cork Lining
Speed of Rotation of Boxes
Size of Test Specimen
Size of Rubber Tubes
Motor
Counter
Overall Dimensions of the Unit
28
Crockmeter
To determine the colour fastness of textiles to dry /wet rubbing
Specification
Diameter of the Rubbing Finger :
16 mm
Force on the Finger
:
9N
Size of Crocking Cloth
:
(5 x 5) Cms
Length of the Traverse
:
105 5 mm
Counter (Re-settable)
:
4-Digit Counter
Size of Test Specimen
:
25 x 5 Cm
Overall Dimension of the Unit :
600 (W) x 190 (D) x 200 (H) mm
Net Weight of the Unit
:
4 Kg. (9 lbs)
Construction
:
Cold-rolled steel
03/13/15 05:37 PM
29
03/13/15 05:37 PM
30
03/13/15 05:37 PM
31
Perspirometer
Frame Construction
:Stainless steel
Load on the Test Specimen
:5 kg.
Size of Test Specimen
:100 mm x 40 mm
Size of Acrylic Separator Plates :115 mm x 60 mm
Number of Separator Plates
:210Nos.
Dimensions of the Unit
:225 mm(L)x72 mm(W)x182 mm(H)
Net weight of the Unit
:8.3 kg.
03/13/15 05:37 PM
32
Fabric Extensioner
Over all Dimensions of the Unit
Weight of unit
03/13/15 05:37 PM
:61cmx10cmx12cm(H)
:20/500Kg.
33
34
Shrinkage Template
It consists of a fine calibrated Marking Template which is used to mark
Fabric with 14 inches bench marks for accurately determining
Change in fabrics/garments. After the fabrics/garment is laundered/dry
cleaned/washed Processed, the dimensional change can be read
directly and accurately In percent change with the calibrated
shrinkage scale/rule.
03/13/15 05:37 PM
35
03/13/15 05:37 PM
36
:
:
:
:
:
:
:
03/13/15 05:37 PM
37
:
:
:
:
:
:
40mm x 15mm.
1 Kg. (Stainless Steel)
On an Engraved Circular Scale graduated in 1 deg.
0-180 Degrees
All Stainless Steel (except base)
9 Kg
38
Densimeter
To determine E.P.I. and P.P.I. of plain weave fabric.
03/13/15 05:37 PM
39
03/13/15 05:37 PM
40
Oven(S.S.)
Used for heating and undertaking other oven dry tests in the
laboratory.Temp range ambient to 250C.
Over all Dimension of the Unit : 45cm(L)x40(W)cmx62(H)cm
03/13/15 05:37 PM
41
Lab Incubator:
Temperature ambient minimum 2 c.
03/13/15 05:37 PM
42
ZigZag Cutter
Used to cut the samples in zig-zag style of required size.
Size of cutting pad : 31 x 28.
Size of blade : 50 c.m. Long.
Machine dimensions : 31 (d)x 28(w) x 54 (h).
Machine weight : 28/500 Kg.
03/13/15 05:37 PM
43
03/13/15 05:37 PM
:
:
:
:
:
44
03/13/15 05:37 PM
45
03/13/15 05:37 PM
46
03/13/15 05:37 PM
47
48
Stroboscope
50-12,000 Flashes per minute. AC 220 V Supply
03/13/15 05:37 PM
49
Stroboscope
50-12,000 Flashes per minute.
Cable free with battery back up facilities.
03/13/15 05:37 PM
50
Moisture Meter
Moisture content 0-50%, Temperature 10-60 C.
03/13/15 05:37 PM
51
Sound Level
Meter
30~130dB
03/13/15 05:37 PM
52
Lux Meter
0-50000 LUX 0-5000 FC
03/13/15 05:37 PM
53
Tachometer
Rotative velocity laser 2.5-99999 r/min, Contact 0.5-1999r/min
03/13/15 05:37 PM
54
Air Permeability
Tester
THE Air Permeability Tester is a unique, instrument for
determination of the air permeability (or of the pressure
drop at a selectable air velocity) and, with some
restrictions, of the thickness of fabrics, Nonwoven, felts
and films. The main application is paper machine
clothing.
03/13/15 05:37 PM
55
Water
Permeability
Porosity and water permeability are two distinct terms that describe different
characteristics of vascular prostheses. The porosity is a measure of the void
fraction within the prosthesis wall and is believed to give a rough prediction of
the capacity of the graft to anchor newly formed surrounding tissue after
implantation, whereas the water permeability indicates the rate at which water
can flow through the prosthesis wall and, when measured under physiological
pressure conditions, provides the surgeon with information about the need for
preclotting prior to implantation. The literature has not always clearly
distinguished between these two terms, and some authors in fact have
suggested that they both refer to the same property of a prosthesis. In an
attempt to clarify the issue, porosity and water permeability measurements were
made on 34 commercial vascular prostheses having different textile
constructions. Linear regression analysis demonstrated that these two
characteristics are only weakly related (r = 0.59). It is therefore recommended
that the current draft standards for such devices reference both properties:
porosity and water permeability.
03/13/15 05:37 PM
56
Fibre Wall Chart: Shows the characteristic properties of all types of fibres.
Fire Retardancy Tester: To check the flame resistance of the fabric.
Air Permeability Tester: To determine the air permeability of the fabric.
Flexing Tester: To determine the flexing of the fabric.
Bursting Strength Tester: To check the bursting strength of fabrics.
03/13/15 05:37 PM
57
03/13/15 05:37 PM
58
NOTE
Shown all images are just for your knowledge and the final
product design can be change.
All the specifications are given to you on the bases of
general systems and may be changed during the process of
supply time as per newly updated parts inclusions.
We will send you the images of newly colored instruments
pictures through the email and you can give suggestions for
the color selection and the way of design will be upgrade
without changing international standards requirements.
03/13/15 05:37 PM
59