Beruflich Dokumente
Kultur Dokumente
and Documents
This document consists of two parts: the promotional slides of the wireless smart terminal deployment tool WDT
and the operation guide slides.
1. Promotional slides: describes tool functions, project delivery pain points, effect and value of the tool, comparison of delivery methods, and success stories.
2. Operation guide slides: includes the detailed WDT operation guide that can be used for quick guide. These slides provides the technical details, operation
experience and implementation skills in the project deployment.
Remarks: Pay attention to italics highlighted in yellow which marks the important roles that need to be focused and implemented in each part of the content, and the
usage of some pages. Thank you.
The WDT tool deployment contact persons: Sang Yanqi (employee ID: 00189072) (tool promotion) Wang Haizhao (employee ID: 00150702) (tool
promotion) Li Wuyang (employee ID: 00186135) (R&D)
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 1
Huawei Confidential
Contents
1
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 3
; 5%
RTWP ; 2% ; 18%
; 18%
Rework
; 15%
; 42%
Case:
Transmission and remote deployment conditions are not met at the earlier stage of a delivery project. To meet the deadline, 200 sites are
installed. After sites go online later, only 50 sites are working properly and the other 150 sites have alarms, such as standing wave alarms,
optical alarms related to no TX/RX optical modules, and low or high optical power alarms.
Therefore, these 150 sites are handed over to the supervisor and subcontract to go online multiple times by using laptop computers and
professional construction tools. This wastes costs and delays the progress.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 4
ALL (USB flash drive, DT mobile phone, camera, GPS, barcode scanner, alarm board, paper, and pen
among others) in ONE (smartphone)
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 5
WDT functions
Script
Software
Note: Subcontractors do not need to load any functions. They can use the functions
only by clicking the corresponding buttons.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 6
One-click self-check:
WDT functions
Android Terminal
VSWR
PIM
Cross Feeder
CPRI
Rectify faults
onsite.
One-click
self-check
Note: Subcontractors do not need to load any functions. They can use the functions
only by clicking the corresponding buttons.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 7
WDT functions
Trans-link
Auto Ping
Auto TRACERT
Trans error detect
One-click transmission
fault location
Note: Subcontractors do not need to load any functions. They can use the functions
only by clicking the corresponding buttons.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 8
WDT functions
Wizard-based photographing
and one-click report
generation:
Subcontractors can achieve wizardbased photographing based on a
customized list, thereby preventing
some photographs from being
missed. The WDT automatically
takes photographs and renames
and sorts the photographs.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 9
. Laptop computer
1. Skills of software commissioning engineers
are high and devices are expensive.
2. Commands are queried manually one by one
and the fault locating skill requirements are
high.
. PNP:
1. The ESN reporting is inefficient and error
prone.
2. Transmission is out of position. The delivery
cannot start.
3. Local faults are invisible and remote
communication is inefficient.
4. OMC engineers are engaged in lots of affairs,
calls, and pressure.
. Acceptance:
1. Use multiple devices to collect information at
random.
2. Check items are easy to miss and error prone.
Base Station
Commissioning
Site
Acceptance
USB:
WDT Functions
Data
Loading
Pain Point
1.
2.
3.
4.
5.
Alarm query
6.
Operation log
1.
2.
Acceptance photo-taking
3.
4.
5.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
Report
Tool
. Report:
1. Later data filtering and reorganization costs a
lot of time.
2. Labor costs are high and data accuracy is
uncertain.
Effect
1.
Operation replay
2.
HUAWEI Confidential
Page 10
Acceptance or survey
documentation
The customization period
is less than one week.
Trans
mit ph
ot
such ographs ba
as em
c
ail, SM k through
m
S, or
net dis ethods
k.
Base station
OMC
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 11
Transmission faults are avoided, software commissioning engineers are no longer required, and the project team does
not need to pay frequent site visits. This improves delivery efficiency, reduces the number of site visits, and ensures
delivery progress.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 12
ns
the
ne
fe r
lmobile
mu phones
2. Delivery of smartphones will become the trend in the future. All fields of Huawei are developing mobile phone tools. Considering
enc prothat
j
e
s
c
e
t
can be used for a long time, you are advised to purchase smartphones in batches based on the following selection policies:
af
te t fo c
te r
a
u
sel m or s on
ect
t
t
1. The mobile phone functions in the delivery: site deployment and project quality self-check, service test, and reporting photo-taking.
ing he re his sl
p
the
res ide
a
encan
m
The site deployment and project quality self-check functions basically have no requirements on mobile phone performance. Mobile phones of Android
2.3
to
ode 4.4
tati bend
ve
s.
used. Android mobile phones bought on the Taobao with 200 RMB (exemption from postage) also support the WDT.
2. Service test requirements: If there are service test onsite requirements on the wireless side (Not a drive test for network optimization. Drive test tools for network
optimization are checked and prepared by the network optimization side.):
A. Preferred mobile phones support the modes and frequency bands required by the project, and mandatory feature tests, such as the CSFB and VoIP, which need to
be checked by the wireless project owners.
B. If lock screen is tested, the PHU and a third-party lock frequency software must be installed on the mobile phone at a time. You are advised to choose preferred
phone models that support the software (You need to confirm with the Huawei PHU team or the third-party software personnel).
3. Photo-taking requirements: If customers have high quality requirements on photos, the mobile phone resolution must be no lower than 8 million. In addition, the
mobile phone must support the autofocus and SD card functions (mainstream mobile phones in the market basically support the functions).
Summary: If customers have dialing test requirements, mobile phones of specified models that support the dialing test function must be purchased. If there is no dialing
test requirements, purchase Android mobile phones with a resolution no lower than 8 million that are easy to purchase at local area.
Note:
To ensure that the functions are stable, smuggled cell phones and pirated cell phones cannot be used. You are advised to use the Android mobile phones produced by
global mainstream vendors, such as: Samsung, HTC, and Huawei (If some Android mobile phones cannot be compatible, please send the phone models and Android
versions back to the WDT deployment contact person. Thank you!).
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 13
Wir
e le
ss
and resp
rep
o
res provi nsibl
d
e
ent
ativ e this pers
oAP
eo
s
nneConfiguration Requirements
ffic lid3.
e
e fo to t l mus
t fo
r re he pConfiguration
Configurat
r
f
e
o
ren Requirements
m
jec cus o
ion
odItem
c
e a t tea n th
es.
fter
m o is s
Supported
r th lg,
ide
sel b,
standards IEEE 802.11
ect 802.11
e
ing
and
802.11 n
th e
protocols
Model
1 TP-LINK TL-MR12U
Taobao: Www.taobao.com
Amazon: www.amazon.com
2. Other AP lists (The external power is used and the AP obtains power from the USB
port on the control board.)
Note: The UMPT board has no USB interface, and APs with external power supply cannot obtain power
from the UMPT board.
ID Model
1 TP-Link WR702N
POWERLINK AP2403
or
POWERLINK PTAP2403
3 B-Link BL-MP01
Amazon: www.amazon.com
Note: Theoretically, all APs in the market support self-supplied power. However, some AP vendors set built-in firewall and password
by default.
If you
find that theCO.,
WDT cannot log in to the base
station or cannot upgrade the software, disable the default settings and
HUAWEI Confidential
HUAWEI
TECHNOLOGIES
Page 14
HISILICON
SEMICONDUCTOR LTD.
password of the AP firewall.
Wireless Deployment
Tool WDT
T
his
pag
e
; 5%
RTWP ; 2%
; 18%
; 18%
; 15%
; 42%
Benefits of Wireless
Deployment Tool WDT
is u
sed
Fault prevention
for
WD without using the remote OSS even when transmission links are
Tunavailable.
p ro
pro motio
duc site
2. Generates
n deployment reports automatically
t te , and
a
is p and alarm status is queried based on
Photographs are
m i collected
f
i
vi
t isandro
specified sequences,
standard
site deployment reports are
req todereduce
d fo report preparation time.
generated in one-click mode
uir
ed. r eac
hr
egi
3. Lowers skill requirements on subcontractors
ona
l of
GUIs make installation and operation easier.
fice
Subcontractors can operate equipment upon installation without
and
reading related guides.
information such as site detection information, equipment serial numbers (ESNs), latitudes, and longitudes.
Function 3: OMC playback during self-check
Engineers can replay operation logs to locate faults. They can also view archived logs in the OMC to trace site deployment
processes.
ALL (USBHUAWEI
flash
drive,
DT mobileCO.,
phone,
paper, and pen among
HUAWEI Confidential
TECHNOLOGIES
LTD. camera, GPS, barcode scanner,
HISILICON
SEMICONDUCTOR
others) in ONE (smartphone)
Tool contact
Page
15 of Wireless Product Rollout Dept: Sang
Yanqi (employee ID: 00189072)
Wir
e
car less
d
efu
lly epart
exp (beca ment
l ea
erie use
nce the ders
ar e
rela slid
e
ted
s in adv
to p clu ised
d
roj
ect e tec to rea
imp hnic d th
e
l em al d
eta slide
en t
atio ils a s
n).
nd
Huawei Confidential
Copy WDT.apk to the root directory of the smartphone and click to install.
2. Scan the following two-dimension code and download the installation package:(Print QR Code on paper)
Click to install after download successfully.
QR Code
Folders
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
Page 17
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
2. Offline applying
a. Obtain Device ID from
b. Send to administrator Wei Jie 00190129, Li Wuyang 00186135
Note: Provide your project information while sending email.
c. Copy license file to smart phone.
d. Import file and start to use WDT.
Page 18
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 19
MICRO
LAMPSITE
GSM
UMTS
Function
Stores software of SRAN8.0, 9.0, and 10.0 base stations, including
BTS3900 WCDMA, BTS3900 LTE, and co-MPT BTS3900.
Stores UMTS 7.0 and BTS3900 WCDMA 8.0, 9.0, and 10.0
software.
LTE
Stores LTE 7.0 and BTS3900 WCDMA 8.0, 9.0, and 10.0
software.
LIC
CA
CRL
MML
Stores
the Customized
MML script.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
RETCFG Stores the RET antenna configuration data.
FileName
Description
Location
Software Folder
Software
\HuaweiBTSInfo\BTS3900\Software
HotPatch Folder
HotPatch
\HuaweiBTSInfo\BTS3900\HotPatch
*.xml/*.xml.ecf
Software Folder
*.xml/*.xml.ecf
Software Folder
*.xml/*.xml.ecf
*.csp
Precfg.ini
Site Script
Software
Site Script
Software
Site Script
Software
Preconfig
\HuaweiBTSInfo\BTS3900\SiteName
\HuaweiBTSInfo\MICRO\Software
\HuaweiBTSInfo\MICRO\SiteName
\HuaweiBTSInfo\LAMPSITE\Software
\HuaweiBTSInfo\LAMPSITE\SiteName
\HuaweiBTSInfo\GSM\Software
\HuaweiBTSInfo\GSM\Software
TranCfg.INI
Transmition
Config
Software.csp
vercfg.xml
HotPatch Folder
*.xml/*.xml.ecf
Software.csp
vercfg.xml
HotPatch Folder
*.xml/*.xml.ecf
Software
Version config
HotPatch
Site Script
Software
Version Config
HotPatch
Site Script
*.dat/*.lic/*.xml
License
\HuaweiBTSInfo\LIC
*.pem/*.cer/*.per/*.p7b
*.crl
CA cert
CRL
\HuaweiBTSInfo\CA
\HuaweiBTSInfo\CRL
*.txt
*.bin
MML
Script
Page
20
RET Config
\HuaweiBTSInfo\GSM\SiteName
\HuaweiBTSInfo\UMTS\Software
\HuaweiBTSInfo\UMTS\Software
\HuaweiBTSInfo\ UMTS \ HotPatch
\HuaweiBTSInfo\UMTS\SiteName
\HuaweiBTSInfo\LTE\Software
\HuaweiBTSInfo\LTE\Software
\HuaweiBTSInfo\LTE \ HotPatch
\HuaweiBTSInfo\LTE\SiteName
\HuaweiBTSInfo\MML
\HuaweiBTSInfo\RETCFG
Stores base
station software
Software
Stores the base
station
configuration file
M2000.XML
BTS3900
Base station
name
HuaweiBTSInfo
LIC
Note:
To save storage space, engineers can delete unneeded software packages of the BTS3900 based on site
requirements, such as BOOTROM, GBTS, and eGBTS.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 21
Step 2 Connect the AP to the commissioning port of the main control board
using a network cable.
For a main control board such as GTMU, WMPT, or LMTP:
Connect the AP directly to the ETH commissioning port of the main control board using
a network cable.
For the main control board UMPT:
In countries outside China, each UMPT board is delivered with a USB-to-network port
cable by default. Connect the AP directly to the network port of the USB-to-network
port cable.
In China, each UMPT board is not delivered with a USB-to-network port cable by
default, and auxiliary materials are centrally delivered. Obtain USB-to-network port
cables from the warehouse before site visits.
HUAWEI Confidential
Page 22
Connect the AP to a
UMPT board.
Function 1: GUI
Phone does not require to pre-connect Wi-Fi, Please click "Deployment" icon and then to select Wi-Fi
signal, then can connect AP and login station.
3. WDT start
Click the SDT icon, select the RAT of base stations you want to log in to, and select the site where the configuration file is saved. The navigation page is displayed.
According to standard, software version and control board to select the corresponding "Select Mode" option, please refer to the following table.
Recommended
Logging RAT
RAT
Selection
GSM
GSM
HuaweiBTSInfo / GSM
WMPT
UMTS
UMTS
HuaweiBTSInfo / UMTS
LMPT
LTE
LTE
UMPT
GSM/
UMTS/
LTE/
GU/
GL/
UL/
GUL
BTS3900
Micro UMTS,
Micro LTE
Micro
Lampsite
UMTS,
Lampsite LTE,
Lampsite UL
Lampsite
Base
Station
Type
GTMU
BTS3202E/
BTS3203E/
BTS3902E/
BTS3803E
LAMPSITE
Path
HuaweiBTSInfo / LTE
HuaweiBTSInfo /
BTS3900
HuaweiBTSInfo / Micro
HuaweiBTSInfo /
Lampsite
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 23
One-click deployment
Visible progress and status
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 24
The visibility of IP transmission deployment process allows you to locate faults quickly. It reduces the time from 20-minute to 1.
Red, yellow, and green lights indicate task results, providing a simple and direct view. You can expand them to view details.
Note: Create site NE icons on the M2000 to ensure that the status of 1. OMCH/OML Information is in green, indicating connected.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 25
The input-free function automatically reads the next hop IP address of the base station and the IP addresses of the BSC and
M2000. The ping and Tracert tests can be executed multiple times.
You can manually change and type the IP address, and check service IP addresses.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 26
Automatic tests
No rework during the antenna construction
The WDT allows you to test the VSWR, intermodulation, and antenna cross feeder connection functions.
Commands are automatically executed and results are displayed in red, yellow, and green, providing a direct and simple view.
Note: After the software and configuration data is download, base stations are restarted. Wait for 12 minutes and then enable the antenna check
function. Software of RRUs takes effect slowly. It takes 12 minutes for three 8-channel RRUs to take effect.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 27
Meaning of signal
green not interfered
red interfered
yellow execution failed
Supported networking types: multi-core RET, SBT connected to the RET, and STMA connected to the
RET
Supported scenarios: built-in RCU, external single antenna, and external RCU cascading scenarios
Note External cascading scenarios need to scan ESN.
Show details of each step, highlight the failure
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 28
Sector1
built-in RCU
Scenario
Internal cascading
External
non-cascading
External cascading
Sector1
Sector1
Sector3
Sector2
WDT
automatically
scan the ALD
devices
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
add ret
download cfg
Calibration
No need
No need
Automatically add
Manually scan the ESN of
RCU with camera
automatically loaded
down RET configure
data file
Which Stored in
SDCard
HUAWEI Confidential
Automatically
calibration
Adjust
Automatically
set
retsubunit
tilt
Page 29
operation experience
One-click detection
One-click detection
Scan with camera instead of
writing on paper.
One-click detection.
HUAWEI Confidential
Page 30
Scenario2 External_Regular
In the scenario, one RCU usually connects to one RRU, so you only need to
designate the RRU, RET BIN file, and the tile.
Therefore, the main settings include the RRU sector name, sector subrack No.,
configuration data file name, and RET antenna tilt.
You can add multiple sets of RET antenna settings or delete the RET antenna
settings.
HuaweiBTSInfo
RETCFG
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
Sector1
HUAWEI Confidential
Sector2
Sector3
Scenario3 External_Chain
In the scenario, one RRU usually connects to multiple RCUs. The RCUs need to be identified
through the frequency band or other methods. So you need to designate the frequency bank,
RET BIN file, and the tile.
Therefore, the main settings include the RRU sector name, sector subrack No., identification
flag, configuration data file name, and RET antenna tilt. You can add multiple sets of RET
antenna settings or delete the RET antenna settings.
You can set all the three configuration scenarios or choose any of them. Only the configured
scenario can be used as the activation scenario.
1
HuaweiBTSInfo
RETCFG
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
HUAWEI Confidential
Page 33
The GBTS does not support the board, optical power, cell, and GPS check at the local end.
Board status
Optical power
Export the base station equipment archives, and check whether the material record
information is consistent with the actual situation.
You can perform dialing tests of simple services by blocking or unblocking a cell.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 35
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 36
Error commands are identified and you know the execution progress and return packet at a glance.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 37
Applies to only the LampSite base station. The check item is presented only when you log in from the LampSite entrance.
Presents the topology relationship of the BBU baseband boards, the RHUB, and the pRRU, and the cabinet, subrack, slot, and cell information.
Filters existing cell IDs, indexes directly to the pRRU where the current cell locates, and checks the verification relationship.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 38
Use the maintenance Wi-Fi of the small-cell base station to log in to the DOCK to
query and manage the transmission parameters.
Note: Do not change the default maintenance IP address (192.168.0.49) of the small cell base station to avoid
effecting the time synchronization of the small-cell base station and the DOCK.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 39
Site deployment logs display operation processes and records related to base stations.
Each operation is
recorded precisely,
allowing you to
trace and locate
operations easily.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 40
After site deployment is complete, data is automatically uploaded to the OMC engineer email.
Sender and recipient emails are configurable. The sender email box must be Gmail.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 41
Location of Replay
files on phone
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 42
Fixed entry photo-taking: The mobile phone displays pre-configured entries on the screen. Workers take phones one by one based on these entries.
Random fault photo-taking. Take photos of all faults. Fault photos can be uploaded in real time, facilitating fault locating in time. Photos can be
selected and descriptions can be added to photos.
These entries can be customized. Photos are taken based on these entries. No photo is missing or
improperly taken. Photos can be compressed or edited.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 43
Workers scan bar codes based on pre-configured ESN entries. The function supports one-dimension
and two-dimension code scanning.
The site name, RAT, and ESN name are automatically added before the ESN and then sent to OMC engineers by SMS or email. For example,
Site78_GSM_BBU:210305394710CB001076.
The BBU ESN can be used in ESN binding during the M2000 PNP deployment in real time. This avoids the inefficiency and errors of manual ESN reading.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 44
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 45
Allows you to view brief information about radio parameters,such as radio parameters of GSM,UMTS,LTE,and Wi-Fi.
You need to log in to the base station to obtain PCI parameters of the LTE.
The short message sending and receiving, MMS message sending, calling test, the HTTP test, and the FTP uplink and
downlink tests are supported.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 46
Set preferred
network
mode
Block other
cells
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
Log in to the
site to obtain
PCI
(Optional)
HUAWEI Confidential
Set parameters of
SMS,calling
test,FTP,HTTP
Page 47
Result table
The short message sending and receiving, MMS message sending, calling test, the
HTTP test, and the FTP uplink and downlink tests are supported.
SMS,MMS
message sending
And receiving
Calling test
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
FTP
uplink and downlink
HUAWEI Confidential
HTTP test
Page 48
Result
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
Download software
package and so on,
Re-download them when
changes on server
HUAWEI Confidential
Online
upgrading
Page 49
Contact Sang Yanqi 00189072, Wei Jie 00190129 to get Administrator privileges.
http://support-trial.huawei.com/onlinetools/sdtrp/project.action
It provides the APP uniform access, site deployment data transmission, site deployment result send-back, terminal APP automatic updating, and terminal APP license
management for the site deployment through smartphones.
ID
Type
Function
Management of site
deployment files
Terminal
configuration
Site
deployment
managemen
t
Special
Requirements
Description
Provide the function to upload and delete site deployment files (such as site configuration files, software packages,
and license files).
Provide the function to configure the terminal APP parameters (such as the AP connection, base station settings,
photographing items, ESN items, SWR thresholds, RET antenna, GSM self-defined alarms,
undercurrent/overcurrent alarm settings, business validation, Email and SMS, and staff information) and transmit
the data to the terminals based on actual project conditions.
None
None
The terminal
must be able to
access the
network.
Provide the function to query site deployment result files (such as the ESNs, GPS, site deployment logs, fault
photos, acceptance photos) and download the site deployment result files through terminals.
Assignment of the
site deployment
terminals
Provide the function to assign the sites to designated terminals for site deployment (for example, assign multiple
sites in a batch to one terminal for sites deployment).
Terminal online
registration
Provide the function that the terminals register to the SDTRP server and then be added after being audited by the
user.
Manual adding of
site deployment
terminals
Provide the function to manually add the terminals one by one based on the terminal IMEIs or import multiple
terminals in a batch using an Excel file.
Extension of terminal
validity term
Provide the function to manually extend the terminal validity term and to extend the terminal validity term after
auditing its application for extending its validity term on the SDTRP server.
The terminal
must be able to
access the
network.
Provide the function to export the offline license file that is controlled by the terminal validity term.
None
Provide the function to upload the terminal APP installation packages and update the APP version.
None
7
8
9
Terminal
managemen
t
Exporting of offline
license
Terminal APP
management
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 50
The terminal
must be able to
access the
network.
Provide the function to create projects, create sites, upload and delete site deployment files
(such as site configuration files, software packages, and license files).
Provide the function to query site deployment result files, or to filter by sitename , status and time.
Create a project
Filter function
Create a site
Site list
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 51
Provide the function to set the starting device number, reduce configuration difficulty.
upload files
Undercurrent/Overcurrent threshold
Edit WDTConfig.txt
Save as
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 52
Administrator online add and audit and transfer terminal, provide the function to bulk upload terminal list.
Upload the WDT installation package, prompts terminal to download and update.
Supported bulk upload
Add Terminal
Online license
applying
Update WDT
version
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 53
The mobile phone uploads deployment data in real time. The server displays deployment GUIs
synchronously, facilitating fault locating and communication.
Copies the deployment data folder HuaweiSDTData in the root directory to the PC.
Replays deployment data on the PC and stimulates mobile phone GUIs to reproduce previous
onsite GUIs.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 54
The tool reads data generated during the deployment, such as deployment logs, site photos, ESNs, GPS
information, and service test data, automatically generates professional, neat, systemic, and comprehensive
reports, and submits them to telecom operators.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 55
96.174_DBS3900
WCDMA.xlsx
Thank you!
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 56